Intermetallic compounds formed at the interface between liquid indium and copper substrates

The interfacial reactions between liquid In and Cu substrates at temperatures ranging from 175°C to 400°C are investigated for the applications in bonding recycled sputtering targets to their backing plates. Experimental results show that a scallop-shaped Cu₁₆In₉ intermetallic compound is found at the Cu/In interface after solder reactions at temperatures above 300°C. A double-layer structure of intermetallic compounds containing scallop-shaped Cu₁₁In₉ and continuous CuIn is observed after the Cu/In interfacial reaction at temperatures below 300°C. The growth of all these intermetallic compounds follows the parabolic law, which implies that the growth is diffusion-controlled. The activation energies for the growth of Cu₁₆In₉, Cu₁₁In₉, and CuIn intermetallic compounds calculated from the Arrhenius plot of growth reaction constants are 59.5, 16.9, and 23.5 kJ/mole, respectively.     

INTERACTION OF A SPHERICAL SHOCK WAVE AND A SUBMERGED FLUID-FILLED CIRCULAR CYLINDRICAL SHELL

The complete three-dimensional interaction between a spherical shock wave and a submerged fluid-filled elastic circular cylindrical shell is considered. A hybrid analytical-numerical solving procedure is established. An exact analytical solution in the form of double Fourier series with time-depending coefficients is obtained for the hydrodynamic pressure. Displacements of a shell are approached analytically to reduce the problem to a set of systems of ordinary differential equations, which are treated numerically. Detailed analysis of the interaction is performed with emphasis given to the stress-strain state. A few important features of the interaction process have been found. In particular, it has been shown that the interior fluid not only substantially affects the magnitude of displacements and stresses, but also dramatically changes the nature of the interaction. It has been found that the absolute maximum of stresses can neither be caused by a direct action of a shock wave nor by a constructive superpose of elastic waves in the shell, but by the pressure wave propagating in the interior fluid. This fact seems to be of essential importance for engineering applications, especially when safety is a primary design concern. Another important result is that the maximum stresses are attained at large times, which makes use of early time asymptotics leading to incorrect results. The proposed semi-analytical approach seems to be computationally attractive and suitable for extensive numerical simulations.     

Miscibility of bisphenol-A polycarbonate with poly(methyl methacrylate)

The miscibility of bisphenol-A polycarbonate (PC) with poly(methyl methacrylate) (PMMA) has been reexamined using differential scanning calorimetry (DSC) and optical indications for phase separation on heating, i.e., lower critical solution temperature (LCST) behavior. Various methods have been used to prepare the blends including methylene chloride (CH₂Cl₂) and tetrahydrofuran (THF) solution casting, melt mixing, and precipitation of PC and PMMA simultaneously from THF solution by using the nonsolvents methanol and heptane. It is shown that the resulting phase behavior for PC/PMMA blends is strongly affected by the blend preparation method. However, these blends are miscible over the whole blend composition range (unambiguous single composition-dependent T_g's and LCST behavior) when prepared by precipitation from solution using heptane as the nonsolvent. To the contrary, solution-cast and melt-mixed PC/PMMA blends were all phase separated, which may be attributed to the “solvent” effect and LCST behavior, respectively, not discovered in previous reports. Methanol precipitation does not lead to fully mixed blends, which demonstrates the importance of the choice of nonsolvent when using the precipitation method.     

The low process yield of some PNP power transistors

A study is presented of the symptoms of the devices in a slice of PNP power transistors with a poor yield. The failure modes over the slice are analysed. In specific areas the electrical characteristics and optical appearance of the devices were studied and failure statistics are presented. The low yield is ascribed to cracks in the phosphosilicate glass used for the base diffusion. The effect of these cracks is just visible in the optical and scanning electron microscope.     

Vibrational spectra and ab initio computations of sarcosinium oxalate monohydrate

Single crystals of sarcosinium oxalate monohydrate (SOM) are grown by the slow-evaporation technique at ambient temperature, and vibrational spectroscopic analysis is carried out using NIR-FT Raman, FT-IR, and SERS spectra. The normal mode frequencies and corresponding vibrational analysis of SOM are examined theoretically using the Gaussian’98 set of quantum chemical codes. The two bands present in the SOM ν C=O region, clearly observed in the Raman spectrum, are assigned to “free” and “bonded” carbonyl groups with the hydrogen atom. Vibrational analysis indicates the presence of C-H—O hydrogen bonding interaction producing a blueshift of the C-H stretching frequency.     

Conjugate addition of pyrroles to α,β-unsaturated ketones using copper bromide as a catalyst

Copper bromide was used as a catalyst for the addition of pyrroles to enones. When both the reactants were used in equimolar amounts, mono and dialkylated products were obtained. However, the use of excess enone furnished only dialkylated products. Thus, copper bromide was shown to be an efficient catalyst for the dialkylation of pyrroles.     

Carbon nanotube based bolometer

The contacts of single carbon nanotubes and bundles of carbon nanotubes with superconducting and metallic electrodes are investigated in order to create bolometers and electron coolers. Tunneling contacts of the carbon nanotubes with aluminum electrodes are obtained. The current-voltage characteristics of junctions are analyzed for temperatures from room temperature to 300 mK. The resistance of individual nanotubes is primarily determined by defects and is too large for applications. The use of the bundles of carbon nanotubes makes it possible to considerably reduce the resistance of the bolometer, which is determined by a small number of conducting tubes with good tunneling contacts with the electrodes. The energy gap is equal to hundreds and tens of millivolt in the former and latter cases, respectively. Structures containing bundles of carbon nanotubes can be described in a model with a Schottky barrier. The samples with bundles of carbon nanotubes exhibit the bolometric response to external high-frequency radiation at a frequency of 110 GHz with an amplitude up to 100 μV and a temperature voltage response to 0.4 mV/K.     

A Modified Quasi-Newton Method for Structured Optimization with Partial Information on the Hessian

This paper develops a modified quasi-Newton method for structured unconstrained optimization with partial information on the Hessian, based on a better approximation to the Hessian in current search direction. The new approximation is decided by both function values and gradients at the last two iterations unlike the original one which only uses the gradients at the last two iterations. The modified method owns local and superlinear convergence. Numerical experiments show that the proposed method is encouraging comparing with the methods proposed in [4] for structured unconstrained optimization Presented at the 6th International Conference on Optimization: Techniques and Applications, Ballarat, Australia, December 9–11, 2004