Dynamic range of coherent analog fiber-optic links

We investigate the performance of coherent analog optical links employing amplitude modulation (AM), phase modulation (PM), and frequency modulation (FM). The performance of these coherent links is compared to that of AM direct-detection (DD) links. The signal-to-noise ratios, nonlinearities, and-spurious-free dynamic ranges (SFDR's) of the foregoing links are evaluated. We calculate the SFDR for links using DFB and Nd:YAG lasers with typical linewidths of 10 MHz and 5 kHz, respectively. The performance of PM and FM links is dominated by phase noise above a critical value of received optical power. For a linewidth of 10 MHz, and SFDR's of PM and FM links are 30 and 31 dB, respectively, for a received optical power above -27 dBm in a 1 GHz bandwidth. For a linewidth of 5 kHz, the corresponding SFDR's above a received power level of 0 dBm are 51 and 53 dB. The performance of DD and AM links is dominated by RIN above a critical value of received optical power. For a RIN level of -155 dB/Hz, the SFDR's of DD and AM links are 49 and 47 dB, respectively, for a received optical power of 10 dBm in a 1 GHz bandwidth. The SFDR's of the DD and coherent links used for transmission of subcarrier-multiplexed (SCM) signals are also derived. We evaluate target laser parameters needed by a number of different applications. For AM video and antenna remoting applications, linewidths of <1 and <3 kHz are required to use PM and FM links, respectively. For FM video, linewidths of <150 and <350 MHz are required to use PM and FM links. For SCM digital applications, linewidths of <80 and <200 MHz are required to use PM and FM links. The paper concludes with a discussion of system implementation issues, including linearization, optical frequency modulation, balanced receivers, and IF issues     

Computationally efficient methods for bit-error rate evaluation inweakly coherent optical systems

A semianalytical method to estimate the bit-error rate performance of nonsynchronous ASK and FSK optical heterodyne systems is presented. This approach takes into account numerous system details with an accuracy similar to Monte-Carlo simulation, but with a computation time reduced by several orders of magnitude. An analytical approximation, based on a closed-form expression for the decision variable moment generating function, is also presented. The results obtained with the semianalytical method and the analytical approximation are compared to Monte-Carlo simulation results and to measurements obtained on a practical FSK system     

A time domain approach for avoiding crosstalk in optical blockingmultistage interconnection networks

Crosstalk in multistage interconnection networks can be avoided by ensuring that a switch is not used by two connections simultaneously, in order to support crosstalk-free communications among N inputs and N outputs, a space domain approach dilates an N×N network into one that is essentially equivalent to a 2N×2N network. Path conflicts, however may still exist in dilated networks. This paper proposes a time domain approach for avoiding crosstalk. Such an approach can be regarded as “dilating” a network in time, instead of space. More specifically, the connections that need to use the same switch are established during different time slots. This way, path conflicts are automatically avoided. The time domain dilation is useful for overcoming the limits on the network size while utilizing the high bandwidth of optical interconnects. We study the set of permutations whose crosstalk-free connections can be established in just two time slots using the time domain approach. While the space domain approach trades hardware complexity for crosstalk-free communications, the time domain approach trades time complexity. We compare the proposed time domain to the space domain approach by analyzing the tradeoffs involved in these two approaches     

Remote delivery of video services using mm-waves and optics

Advantages of a radio-based final drop for video delivery are outlined and spectral availability constraints that lead to the identification of the mm-wave region of the radio spectrum as the most appropriate for this application are discussed. The possibility of simultaneously supporting other broadband services, such as B-ISDN and traffic information systems (IVHS), enhance the attractiveness of a radio link. A large number of antenna units need to be served due to the limited propagation distances achievable at mm-wave frequencies, and therefore, a low-cost generation and delivery method has to be developed. In this paper, alternatives for the optical generation and distribution of mm-wave signals are reviewed and a new method is proposed that eases the bandwidth, and hence the cost, of the required optoelectronic components. An assessment of the relative merits of the methods is given     

A 20-Gb/s silicon bipolar 1:4-demultiplexer IC

This paper presents a 20-Gb/s 1:4-demultiplexer for future fiber-optic transmission systems. It uses an 0.4-μm emitter double polysilicon 21-GHz f_T Si bipolar foundry process. This is the highest data rate of a 1:4-DEMUX reported so far in any technology. The 1:4-DEMUX features a tree-type architecture with one frequency divider and a channel switch circuit. The circuit design was carefully optimized to achieve high speed and moderate power dissipation. It consumes 1.4 W with a single -4.5-V supply     

Ultrahigh and controllable drain current peak-to-valley ratio innegative resistance field-effect transistors with a strained InGaAschannel

Negative resistance field-effect transistor (NERFET) devices using either strained InGaAs or unstrained GaAs channel layers have been fabricated. The strained InGaAs channel NERFET's show strong negative differential resistance and large drain current peak-to-valley ratio. The peak-to-valley ratio of the InGaAs channel NERFET is more than 3000 at room temperature and larger than one million (10⁶) at 77 K. The peak-to-valley ratio is controllable by adjusting the collector voltage     

Delay spread measurements for the digital cellular channel inToronto

The paper describes a set of measurements performed in the Toronto area, in order to assess the impact of multipath propagation on the performance of the TIA IS-54 digital standard. Five existing cells were systematically surveyed: two in downtown Toronto, two in the suburbs, and one in a suburban/rural area. A sweeping correlator apparatus with a 0.1 μs resolution and 910 MHz carrier frequency, and an omnidirectional antenna was used. In one of the cells, the measurements were repeated with a 60 degree beamwidth directional antenna. A fairly sophisticated thresholding technique was applied in order to reduce the impact of noise. Generally, the measurements with the omnidirectional antenna exhibit multipath propagation with considerably smaller excess delays than some reported, but are consistent with earlier results obtained in the U.S. and Europe. Sectorization was found to considerably reduce the multipath effects. Very large delay components appear to be due mostly to the combination of large transmitter-receiver distances and a large degree of shadowing, and could probably be avoided to a large extent by standard cellular engineering techniques. In view of these results, it seems that the long delay (high selectivity) problem has been somewhat overemphasized in the past, at least for areas like Toronto. Problems associated with short delays (flat fading), on the contrary, appear to have been underestimated in the case of dense urban environments     

The effect of adjacent channel interference on the capacity of FDMAcellular systems

In FDMA cellular radio systems, the adjacent channel interference (ACI) is suppressed by the IF filter and also by a distance factor. Channels immediately adjacent to each other in frequency are assigned to different cells and, as such, the distance plays a role in reducing their mutual interference. The authors study the feasibility of optimizing the frequency spacing between carriers such that the combined effect of distance and IF filter will be enough to control the interference while allowing the maximum number of channels in a given bandwidth. They also study the decision feedback equalizer (DFE) as a means to reduce any excess ACI that results from reducing the channel spacing. The paper starts with a model that estimates the cumulative probability density of the signal to adjacent channel interference ratio (SIR) as a function of the channel spacing. They then present the results of a computer simulation study to estimate the performance of DFE in mitigating the effect of ACI. The results indicate that, under the conditions of slow flat fading and selection diversity, the DFE is very effective in reducing the effect of excess ACI interference which allows for a considerable reduction in the frequency spacing     

Development of statistical theory in reliability engineering: A survey

Statistical theory and its applications have played a significant role in the advancement of methodology and techniques for solving various problems in reliability engineering. Different criteria of aging have been introduced for modelling and characterizations of wear properties. Some real life engineering reliability operations arising in maintenance and replacement policies formulations are investigated as convolution, mixture and formation of coherent systems. Shock models are studied for shocks arriving according to Poisson process and causing damages with specific form of aging. Cumulative damage models have been also studied by many researchers. Statistical hypotheses testing are used to test whether a certain, censored or uncensored data has exponential or a specific aging propety.In this paper we present a unified state of the art type of survey for the research and developments in these problems. In particular we expose the main recent contributions, trace the trend of research and highlight the possible direction of further research.     

Probabilistic approach to some problems of system safety

Measures of direct importance of unrepairable system components, based on the multilinear expansions, are introduced. Various characteristics of system quality of performance are discussed. Cases of binar and multistate components are studied. The measure of specific importance, considering the cost of reliability component's improvement, is defined. The multilinear expansion for a system of multistate components, giving the possibility to estimate measures of the direct importance of components and levels of components performance as well, is discussed. The limit transition to continuum structures is performed. Some measures of importance for repairable systems are introduced.