Dependence of electrical properties of polycrystalline cvd si films on grain size and impurity doping concentrationa,b

The electrical properties of sets of simultaneously grown p-type polycrystalline Si films, deposited by SiH₄ pyrolysis on polycrystalline high-purity alumina substrates and B-doped during growth, were determined by Hall-effect measurements in the temperature range 77-420K as functions both of impurity doping concentration N (~10^l5 to ~10²⁰cm⁻³) and average grain size (≈1 to ≈125μm) in the film. Room temperature data showed rapidly increasing resistivities and rapidly decreasing free-carrier concentrations for doping below a critical concentration N_m and distinct mobility minima at that concentration, with the value of N_m being larger the smaller the average grain size. Measurements as a function of sample temperature showed the intergrain barrier height E_b, decreasing from a maximum value of ~0.4eV at the critical concentration to very small values (~0.01eV) for concentrations above 10¹⁹cm⁻³, with a functional dependence close to E_b ∝l/N^1/2 and E_b for any given concentration being larger the smaller the average grain size. Results are interpreted in terms of the grain-boundary trapping model. Trapped carrier densities in the grain boundaries were calculated to range from ~5×l0¹¹cm⁻² at N≈N_m to ~5×l0¹²cm⁻² for N>10¹⁹cm⁻³, the density being higher the smaller the grain size, and evidence was found for an energy distribution of traps in the Si bandgap, rather than a fixed density at a single discrete energy level. The observed relationship between N_m and average grain size nearly coincides with that of the model for films with ~lμm grain size but sharply departs from it for larger grain sizes, indicating probable applicability of the model for grain sizes up to that range. ^aThis work was supported by the U.S. Department of Energythrough its San Francisco Operations Office under Contract DE-AC03-79ET23045 and monitored by the Solar Energy Research Institute, Golden, CO. bThese results were first described at the 22nd Electronic Materials Conference, Ithaca, NY, June 21–27, 1980, Paper No. M4.     

Mechanism of amine catalyzed isomerization of itaconic anhydride to citraconic anhydride: Citraconamic acid formation

The amine catalyzed isomerization of itaconic to citraconic anhydride has been investigated. Studies show that the rate of isomerization is dependent on the base strength and solvent media. Triethylamine causes complete isomerization within 5 min at room temperature in acetone or chloroform solvent, whereas aromatic tertiary amines such as pyridine and N,N-dimethylaniline require time perods as long as 23h at room temperature for almost complete isomerization. In the presence of aniline no isomerization occures even under acetone reflux conditions over a 24 h period. For the preparation of citraconamic acids from itaconic anhydrides and aliphatic diamines nuclear magnetic resonance and infrared spectroscopic evidence is presented to support the reaction path of initial isomerization of itaconic anhydride to citraconic anhydride followed by amine attack on the anhydride to form the corresponding cis-citraconamic acids. The mechanism of isomerization of itaconic to citraconic acids is proposed.     

Four-photon resonant multiphoton ionization spectroscopy

Resonant multiphoton lonization (MPI) has been found to the red of the lowest energy three-photon resonant MPI band of butadiene. The signal arises from four-photon resonant MPI with an estimated cross section of 10^?115-2-10^?118 cm⁸ s³. The observed resonance is deduced to arise from a succession of one-photon allowed transitions.     

Characterization of pure high-grade DCIS on magnetic resonance imaging using the evolving breast MR lexicon terminology: can it be differentiated from pure invasive disease?

Magnetic resonance imaging (MRI) is now a recognized method of imaging the breast. Unfortunately, there is lack of standardization in the MRI terminology used to characterize the appearance of breast lesions. Moreover, cases of mixed histologies are often imaged. We retrospectively identified cases of pure high-grade ductal carcinoma in situ (DCIS) using the recently introduced breast MRI lexicon and characterized the lesions in order to try and identify features that might distinguish high-grade DCIS from invasive disease. Five-year review of our institution's database revealed 637 patients underwent gadolinium-enhanced breast MRI examination. Twenty patients had histologically proven pure high-grade DCIS. After excluding patients with previous chemotherapy or inadequate MRI examination, 13 patients were analyzed and compared to the 13 most recent cases of pure invasive breast carcinoma. The morphological and dynamic features were then compared. High-grade DCIS cases were significantly more likely to show focal branching pattern (P=.03) and to have an irregular contour (P=.03), compared with invasive disease. Although of marginal statistical significance, DCIS lesions are more likely to have a lower morphological score than invasive carcinoma (P=.06), whilst the latter is more likely to show ring enhancement (P=.07). Use of breast MRI for staging at our institution shows that pure DCIS and pure invasive cancers are both rare entities. Despite the relatively limited numbers, we identified features that would help to differentiate high-grade DCIS from invasive carcinoma on MRI.     

A comparison of T2*-weighted magnitude and phase imaging for measuring the arterial input function in the rat aorta following intravenous injection of gadolinium contrast agent

The arterial input function (AIF) is important for quantitative MR imaging perfusion experiments employing Gd contrast agents. This study compared the accuracy of T(2)*-weighted magnitude and phase imaging for noninvasive measurement of the AIF in the rat aorta. Twenty-eight in vivo experiments were performed involving simultaneous arterial blood sampling and MR imaging following Gd injection. In vitro experiments were also performed to confirm the in vivo results. At 1.89 T and TE=3 ms, the relationship between changes in 1/T(2)* in blood (estimated from MR signal magnitude) and Gd concentration ([Gd]) was measured to be approximately 19 s(-1) mM(-1), while that between phase and [Gd] was approximately 0.19 rad mM(-1). Both of these values are consistent with previously published results. The in vivo phase data had approximately half as much scatter with respect to [Gd] than the in vivo magnitude data (r(2)=.34 vs. r(2)=.17, respectively). This is likely due to the fact that the estimated change in 1/T(2)* is more sensitive than the phase to a variety of factors such as partial volume effects and T(1) weighting. Therefore, this study indicates that phase imaging may be a preferred method for measuring the AIF in the rat aorta compared to T(2)*-weighted magnitude imaging.     

TDDFT study of one- and two-photon absorption properties: donor-pi-acceptor chromophores

We report a comprehensive time-dependent density functional theory (TDDFT) study of one-photon and two-photon absorption (OPA and TPA, respectively) spectra for donor-pi-acceptor molecules. The calculated excitation energies were generally shown to be in good agreement with experiment, particularly when compared to results from measurements carried out in a nonpolar solvent, although the oscillator strengths were overestimated in some cases. Calculated TPA cross sections applying the two-state approximation were shown to be highly dependent on the form of the line-shape function used. Although a good agreement with experimental TPA spectra was generally observed, the wide range in the experimentally measured values and lack of systematic experimental data on solvent effects limited a detailed comparison as yet.     

Speech intelligibility and spatial release from masking in young children

Children between the ages of 4 and 7 and adults were tested in free field on speech intelligibility using a four-alternative forced choice paradigm with spondees. Target speech was presented from front (0 degrees); speech or modulated speech-shaped-noise competitors were either in front or on the right (90 degrees). Speech reception thresholds were measured adaptively using a three-down/one-up algorithm. The primary difference between children and adults was seen in elevated thresholds in children in quiet and in all masked conditions. For both age groups, masking was greater with the speech-noise versus speech competitor and with two versus one competitor(s). Masking was also greater when the competitors were located in front compared with the right. The amount of masking did not differ across the two age groups. Spatial release from masking was similar in the two age groups, except for in the one-speech condition, when it was greater in children than adults. These findings suggest that, similar to adults, young children are able to utilize spatial and/or head shadow cues to segregate sounds in noisy environments. The potential utility of the measures used here for studying hearing-impaired children is also discussed.     

The role of head-induced interaural time and level differences in the speech reception threshold for multiple interfering sound sources

Three experiments investigated the roles of interaural time differences (ITDs) and level differences (ILDs) in spatial unmasking in multi-source environments. In experiment 1, speech reception thresholds (SRTs) were measured in virtual-acoustic simulations of an anechoic environment with three interfering sound sources of either speech or noise. The target source lay directly ahead, while three interfering sources were (1) all at the target's location (0 degrees,0 degrees,0 degrees), (2) at locations distributed across both hemifields (-30 degrees,60 degrees,90 degrees), (3) at locations in the same hemifield (30 degrees,60 degrees,90 degrees), or (4) co-located in one hemifield (90 degrees,90 degrees,90 degrees). Sounds were convolved with head-related impulse responses (HRIRs) that were manipulated to remove individual binaural cues. Three conditions used HRIRs with (1) both ILDs and ITDs, (2) only ILDs, and (3) only ITDs. The ITD-only condition produced the same pattern of results across spatial configurations as the combined cues, but with smaller differences between spatial configurations. The ILD-only condition yielded similar SRTs for the (-30 degrees,60 degrees,90 degrees) and (0 degrees,0 degrees,0 degrees) configurations, as expected for best-ear listening. In experiment 2, pure-tone BMLDs were measured at third-octave frequencies against the ITD-only, speech-shaped noise interferers of experiment 1. These BMLDs were 4-8 dB at low frequencies for all spatial configurations. In experiment 3, SRTs were measured for speech in diotic, speech-shaped noise. Noises were filtered to reduce the spectrum level at each frequency according to the BMLDs measured in experiment 2. SRTs were as low or lower than those of the corresponding ITD-only conditions from experiment 1. Thus, an explanation of speech understanding in complex listening environments based on the combination of best-ear listening and binaural unmasking (without involving sound-localization) cannot be excluded.     

Efficient synthesis of B-alkylated oxazaborolidines derived from ephedrine and norephedrine

[reaction: see text] Representative B-butyl- and B-methyl-1,3,2-oxazaborolidines derived from ephedrine and norephedrine were prepared in good yield and excellent purity by one-pot treatment of B-H oxazaborolidines with the corresponding organolithium reagent and subsequent hydrolysis of the cyclic borohydride intermediate with anhydrous ammonium chloride.     

Effect of fluorine in Li1.27Cr0.2Mn0.53O2 cathode for secondary lithium batteries

Fluorine substituted Li_1.27Cr_0.2Mn_0.53O₂ electrode, prepared by sol–gel method, was investigated in the present work. Thermal analysis was done on this cathode material and found to be thermally stable with a loss of weight near 300 °C. Influence of fluorine substitution on the structural and electrochemical properties of the Li_1.27Cr_0.2Mn_0.53O₂ electrode was studied by X-ray diffraction (XRD) and field emission scanning electron microscope. XRD pattern of the fluorine-doped Li_1.27Cr_0.2Mn_0.53O₂ cathode material quenched at 900 °C indicates a phase pure material. The charge–discharge profile of the prepared cathode material showed that the fluorine substitution for oxygen in the cathode material resulted in improved capacity retention. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, December 7–9, 2006.