Imparting antifouling properties of poly(2-hydroxyethyl methacrylate) hydrogels by grafting poly(oligoethylene glycol methyl ether acrylate)

The antifouling properties of poly(2-hydroxyethyl methacrylate- co-methyl methacrylate) hydrogels were improved by the surface grafting of a brush of poly(oligoethylene glycol methyl ether acrylate) [poly(OEGA)]. The atom-transfer radical polymerization (ATRP) of OEGA (degree of polymerization = 8) was initiated from the preactivated surface of the hydrogel under mild conditions, thus in water at 25 degrees C. The catalytic system was optimized on the basis of two ligands [1,1,4,7,10,10-hexamethyl-triethylenetetramine (HMTETA) or tris[2-(dimethylamino)ethyl]amine (Me6TREN)] and two copper salts (CuIBr or CuICl). Faster polymerization was observed for the Me 6TREN/CuIBr combination. The chemical composition and morphology of the coated surface were analyzed by X-ray photoelectron spectroscopy, attenuated total reflectance Fourier transform infrared spectroscopy, contact angle measurements by the water droplet and captive bubble methods, scanning electron microscopy, and environmental scanning electron microscopy. The hydrophilicity of the surface increased with the molar mass of the grafted poly(OEGA) chains, and the surface modifications were reported in parallel. The antifouling properties of the coatings were tested by in vitro protein adsorption and cell adhesion tests, with green fluorescent protein, beta-lactamase, and lens epithelial cells, as model proteins and model cells, respectively. The grafted poly(OEGA) brush decreased the nonspecific protein adsorption and imparted high cell repellency to the hydrogel surface.     

Toward [18F]-labeled aryltrifluoroborate radiotracers: in vivo positron emission tomography imaging of stable aryltrifluoroborate clearance in mice

The use of a boronic ester as a captor of aqueous [(18)F]-fluoride has been previously suggested as a means of labeling biomolecules in one step for positron emission tomography (PET) imaging. For this approach to be seriously considered, the [(18)F]-labeled trifluoroborate should be humorally stable such that it neither leaches free [(18)F]-fluoride to the bone nor accumulates therein. Herein, we have synthesized a biotinylated boronic ester that is converted to the corresponding trifluoroborate salt in the presence of aqueous [(18)F]-fluoride. In keeping with its in vitro aqueous kinetic stability at pH 7.5, the trifluoroborate appears to clear in vivo quite rapidly to the bladder as the stable trifluoroborate salt with no detectable leaching of free [(18)F]-fluoride to the bone. When this labeled biotin is preincubated with avidin, the pharmacokinetic clearance of the resulting complex is visibly altered. This work validates initial claims that boronic esters are potentially useful as readily labeled precursors to [(18)F]-PET reagents.     

Metal Transition in Sodium–Ammonia Nanodroplets

The famous nonmetal‐to‐metal transition in Na–ammonia solutions is investigated in nanoscale solution droplets by photoelectron spectroscopy. In agreement with the bulk solutions, a strong indication for a transition to the metallic state is found at an average metal concentration of 8.8±2.2 mole%. The smallest entity for the phase transition to be observed consists of approximately 100–200 solvent molecules. The quantification of this critical entity size is a stepping stone toward a deeper understanding of these quantum–classical solutions through direct modeling at the molecular level.     

Evaluating beta-amino acids as enantioselective organocatalysts of the Hajos-Parrish-Eder-Sauer-Wiechert reaction

A systematic study of the effect of substitution within the beta-amino acid framework indicates that both beta(2)- and beta(3)-amino acids catalyse the Hajos-Parrish-Eder-Sauer-Wiechert reaction with poor to reasonable levels of enantioselectivity. These results led to the evaluation of the conformationally constrained beta-amino acid (1R,2S)-cispentacin, which catalyses the Hajos-Parrish-Eder-Sauer-Wiechert reaction with comparable or higher levels of enantioselectivity to L-proline.     

The fcc lattice and the cusped hyperbolic 4-orbifold of minimal volume: In memoriam H. S. M. Coxeter

The 1-cusped hyperbolic coset space of H⁴ by the Coxeter group[4, 3^2,1] of volume ²/1440 is the unique minimal volume orbifoldamong all non-compact complete hyperbolic 4-orbifolds. Our proofis geometric and based on horoball geometry combined with Gauss'scharacterization of the face centered cubic lattice packingas the densest one in euclidean 3-space.     

Iron(II) complexes with a terpyridine embrace packing motif show remarkably consistent cooperative spin-transitions

Six structurally related iron(II) complexes show remarkably similar abrupt thermal spin-transitions.     

Co- and counter-current spontaneous imbibition into groups of capillary tubes with lateral connections permitting cross-flow

A model for co- and counter-current imbibition through independent capillaries has already been developed and experiments conducted to verify the theory [E. Unsal, G. Mason, N.R. Morrow, D.W. Ruth, J. Colloid Interface Sci. 306 (2007) 105]. In this paper, the work is extended to capillaries which are connected laterally and in which cross-flow can take place. The fundamental pore geometry is a rod in an angled round-bottomed slot with a gap between the rod and a capping glass plate. The surfaces of the slot, rod and plate form capillaries and interconnecting passages which have non-axisymmetric cross-sections. Depending on the gap size either (i) a large single meniscus, (ii) two menisci one on each side of the rod, or (iii) three menisci, one between the rod and the glass additional to the ones on each side can be formed. A viscous refined oil was applied to one end of the capillaries and co-current and counter-current spontaneous imbibition experiments were performed. The opposite end was left open to the atmosphere for co-current experiments. When the gap between the rod and the plate was large, the imbibing oil advanced into the tubes with the meniscus in the largest capillary always lagging behind the two menisci in the other two smaller capillaries. For counter-current imbibition experiments the open end was sealed and connected to a sensitive pressure transducer. In some experiments, the oil imbibed into the smaller capillaries and expelled air as a series of bubbles from the end of the largest capillary. In other experiments, the oil was allowed to imbibe part way into the tubes before counter-current imbibition was started. The meniscus curvatures of the capillaries have been calculated using the Mayer and Stowe-Princen method for different cell slot angles and gap sizes using a value of zero for the contact angle. These values have been compared with actual values by measuring the capillary rise in the tubes; agreement was very close. A model for co-current and counter-current imbibition has also been developed. The significance of this model is that some hydraulic/capillary properties are common for both co-current and counter-current imbibition. The experiments give an illustration of behavior expected in a real porous material and verify the importance of the 'perfect cross-flow' modification to the 'bundle of parallel tubes' model.     

Quantitative analysis of bacterial medium-chain-length poly([R]-3-hydroxyalkanoates) by gas chromatography

Standard chromatographic methods for the quantification of bacterial poly(3-hydroxyalkanoate) (PHA) proved to be inappropriate for the analysis of medium-chain-length PHA (mcl-PHA). Transesterification catalyzed by protic acids is not quantitative for mcl-PHA under common conditions due to slow reaction kinetics and formation of side-products in case of functionalized side-chains. To circumvent these limitations, an improved method for the quantification of mcl-PHA by GC-FID was developed. Boron trifluoride in methanol was successfully applied to quantitatively methanolyse different mcl-PHA (recovery >94%). This novel method is well-suited for the analysis of purified mcl-PHA as well as for mcl-PHA in biomass.     

A dual sensor spin trap for use with EPR spectroscopy

Redox active metal ions, carbon-centered radicals, and oxygen-centered radicals are important to oxidative stress. A radical detector combining a nitrone spin trap, a phenol, and a cyclopropane radical clocklike unit was prepared and used with EPR spectroscopy to detect and distinguish between hydroxyl radicals, methyl radicals, and iron(III) ions. Iron(III) reacts with the phenol unit inducing opening of the cyclopropane ring and cyclization to generate a stable nitroxyl radical.