参数设计法在铝电解电容器设计中的应用探讨

论述了参数设计法在铝电解电容器设计开发阶段的应用。文中阐明了铝电解电容器的主要质量特性(损耗因子、电容量)及芯包外径的参数设计原理,并建立了归一化函数作为优选设计方案的判据。实例证明在铝电解电容器的设计过程中应用参数设计法以减小产品质量特性变异是有效的。     

The Role of Network Topologies in the Optical Core of IP-over-WDM Networks with Static Wavelength Routing

In this paper, we present a performance analysis of network topologies for the optical core of IP-over-WDM networks with static wavelength routing. The performance analysis is focused on regular degree four topologies, and, for comparison purposes, degree three topologies are also considered. It is shown that the increase of the nodal degree from three (degree three topology with smallest diameter) to four (degree four topology with smallest diameter) improves the network performance if a larger number of wavelengths per link is available. However, the influence of wavelength interchange on the nodal degree gain is small. The performance of regular degree four topologies with smallest diameter is also compared with the performance of mesh–torus topologies (which are also degree four topologies), and it is shown that the blocking probability of degree four topologies with smallest diameter is about two orders of magnitude lower than the blocking probability of mesh–torus topologies. It is also presented a performance comparison of WDM-based networks with nodal degrees ranging from two to five and it is shown that the increase of the nodal degree from two to three leads to high nodal degree gains, while de increase of the nodal degree from four to five leads to low nodal degree gains. These results show that degree three and degree four topologies are very attractive for use in the optical core of IP-over-WDM networks.     

Novel algorithms for shared segment protection

The major challenges in designing survivable schemes are how to allocate a minimal amount of spare resources (e.g., bandwidth) using fast (e.g., polynomial-time) algorithms, and, in case a failure occurs, to be able to recover quickly from it. All existing approaches invariably make tradeoffs. We propose novel shared segment protection algorithms which make little or no compromise . We develop an elegant integer linear programming (ILP) model to determine an optimal set of segments to protect a given active path. Although the ILP approach is useful for a medium-size network, it is too time consuming for large networks. Accordingly, we also design a fast heuristic algorithm based on dynamic programming to obtain a near-optimal set of segments. Although the heuristic algorithm has a polynomial time complexity, it can achieve a bandwidth efficiency as high as some best-performing shared path protection schemes and, at the same time, much faster recovery than these shared path protection schemes. The proposed scheme is also applicable to a wide range of networking technologies, including Internet Protocol and wavelength-division multiplexing networks under the generalized multiprotocol label switched framework.     

Achieving fast and bandwidth-efficient shared-path protection

Dynamic provisioning of restorable bandwidth guaranteed paths is a challenge in the design of broad-band transport networks, especially next-generation optical networks. A common approach is called (failure-independent) path protection, whereby for every mission-critical active path to be established, a link (or node) disjoint backup path (BP) is also established. To optimize network resource utilization, shared path protection should be adopted, which often allows a new BP to share the bandwidth allocated to some existing BPs. However, it usually leads the backup paths to use too many links, with zero cost in term of additional backup bandwidth, along its route. It will violate the restoration time guarantee. In this paper, we propose novel integer linear programming (ILP) formulations by introducing two parameters (/spl epsi/ and /spl mu/) in both the sharing with complete information (SCI) scheme and the distributed partial information management (DPIM) scheme. Our results show that the proposed ILP formulations can not only improve the network resource utilization effectively, but also keep the BPs as short as possible.     

新型AFM探针的制备及应用

采用熔拉 -腐蚀复合方法 ,将普通单模石英光纤制成直锥形光纤探针。利用自制工具将探针打弯 ,制成悬臂式光纤探针 ,在AFM上取得了较理想的测试结果。将自制光纤探针和商用硅材料探针获得的两种扫描图像进行了对比 ,分析了悬臂式光纤探针的特点     

A New Pathway to Synthesize Cyclomercurated Ferrocenylimines Containing Heterocyclic Ring

The cyclomercurated ferrocenylimines containing heterocyclic ring were prepared by the condensation of cyclomercuration of acylferrocene with the appropriate heterocyclic amine.This procedure provides an efficient method for the synthesis of cyclomerucurated ferrocenylimines containing heterocyclic ring which are difficultly synthesized by the conventional method.The reaction mechanism is proposed.     

陆地棉体细胞胚胎的发生和遗传转化条件初探

以陆地棉（冀棉20）下胚轴为外植体，在含KT0．3mg／L和2，4－D0．08mg／L的MS培养基上，诱导产生了胚性愈伤组织，继代培养不需要添加激素，胚性愈伤组织即分化为胚状体，并萌发出小芽，胚状体萌发过程与合子胚相似，但出现了一些畸形胚，解剖学方法观察发现，这些畸形胚的维管束系统不明显或形态异常，以农杆菌介导法对冀棉20胚状体及胚性愈伤组织进行了雪花莲凝集素（GNA）基因的遗传转化条件探索，并以GUS基域瞬间进行检测加以证实，得出农杆菌的浓度为O．D600＝0．8时，浸染时间为5min，共培养时间为3d，筛选培养基中卡那霉素浓度为75mg／L，对冀棉20胚状体及胚性愈伤组织转化是较为适合的。     

三羟甲基甲胺、季戊四醇及其二元体系固-固相变的变温红外光谱研究

利用傅里叶变温红外光谱仪分别测定了三羟甲基甲胺（TAM）、季戊四醇（PE）及其二元体系变温红外谱。实验表明，多元醇分子中羟基吸收峰随温度升高耐发生位移向高波数移动，此结果既能反映多元醇及其二体系固－固相变的温度区间，又与转变热相对应，从而揭示了多元醇及其二元体系固－固相变贮热的机理。     

判定Q上多项式不可约的一种方法

本文运用复变函数论中的Rouche定理,对Person不可约方法作了大的改进,一系列多项式的不可约性被证实.     

A Class of Cauchy Problem for Quasilinear Hyperbolic Systems with the Weakly Dissipative Terms

ＡＣｌａｓｓｏｆＣａｕｃｈｙＰｒｏｂｌｅｍｆｏｒＱｕａｓｉｌｉｎｅａｒＨｙｐｅｒｂｏｌｉｃＳｙｓｔｅｍｓｗｉｔｈｔｈｅＷｅａｋｌｙＤｉｓｓｉｐａｔｉｖｅＴｅｒｍｓ￥ＬｉｕＦａｇｕｉ；ＹａｎｇＱｉａｏ（ＮｏｒｔｈＣｈｉｎａＩｎｓｔｉｔｕｔｅｏｆＷａｔｅ...