Toughness mechanism in polypropylene composites: Polypropylene toughened with elastomer and calcium carbonate

Polypropylene (PP) was modified with elastomer or CaCO₃ particles of two different sizes (1 μm and 50 nm) in various volume fractions. The dispersion morphology and mechanical properties of the two systems were investigated as functions of the particle size and volume fraction of the modifier. The brittle‐to‐tough transition occurred when the matrix ligament thickness was less than the critical ligament thickness, which was about 0.1 μm for the PP used here, being independent of the type of modifier. At the same matrix ligament thickness, the improvement of the toughness was obviously higher with the elastomer rather than with CaCO₃, but adding CaCO₃ increased the modulus of PP. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1656–1662, 2004     

光学非球面二次曲面常数及顶点曲率的研究

受光学非球面制造过程中诸工艺参数的影响,能否保证非球面顶点曲率及二次曲面常数的精度是一个重要问题。基于二次曲面方程,推导出确定光学非球面二次曲面常数k以及顶点曲率半径r的一组算法,并在对一块口径为760mm×200mm标准非球面反射镜的实际测算中进行拟合,经过优化,拟合精度达到Δk=0.015,Δr=0.341mm,从而有效的控制了光学非球面制造过程中的顶点曲率及二次曲面常数的偏差。     

三系数有限元向量尺度函数的构造

The aim of this paper is to present construction of finite element multiscaling function with three coefficients. In order to illuminate the result, two examples are given finally.     

非理想截面脊形介质光波导导波模式的研究

提出了一种求解任意截面形状脊形光波导的方法，先利用有效折射率的概念解出某种截面形状脊形光波导的等效折射率，再利用转移矩阵的理论求解出波导的模式色散方程。     

利用预曝光技术制备复合结构光纤光栅传感器

报道利用预曝光技术制备的复合结构光纤光栅传感器。提出利用预曝光技术使某一小段光纤的折射率变大,而后在预曝光部分和未曝光部分的交接处一次性写入光栅,即可得到具有两个透射峰的透射谱。实验研究了该复合结构光纤光栅在温度和应力传感上的应用。实验结果表明,利用该复合结构光纤光栅可以实现温度与应变的同时测量。     

EPON媒体接入控制的关键技术研究

文章简要介绍了基于以及太网的无源光网络（EPON）这种新型的接入网技术，将其与基于ATM技术的无源光网络（APON）的优缺点进行了比较，并对其媒体接入控制（MAC）的关键技术测距及上行接入进行了讨论，初步提出了光网络单元（ONU）的软、硬件实现方案。     

参数设计法在铝电解电容器设计中的应用探讨

论述了参数设计法在铝电解电容器设计开发阶段的应用。文中阐明了铝电解电容器的主要质量特性(损耗因子、电容量)及芯包外径的参数设计原理,并建立了归一化函数作为优选设计方案的判据。实例证明在铝电解电容器的设计过程中应用参数设计法以减小产品质量特性变异是有效的。     

The Role of Network Topologies in the Optical Core of IP-over-WDM Networks with Static Wavelength Routing

In this paper, we present a performance analysis of network topologies for the optical core of IP-over-WDM networks with static wavelength routing. The performance analysis is focused on regular degree four topologies, and, for comparison purposes, degree three topologies are also considered. It is shown that the increase of the nodal degree from three (degree three topology with smallest diameter) to four (degree four topology with smallest diameter) improves the network performance if a larger number of wavelengths per link is available. However, the influence of wavelength interchange on the nodal degree gain is small. The performance of regular degree four topologies with smallest diameter is also compared with the performance of mesh–torus topologies (which are also degree four topologies), and it is shown that the blocking probability of degree four topologies with smallest diameter is about two orders of magnitude lower than the blocking probability of mesh–torus topologies. It is also presented a performance comparison of WDM-based networks with nodal degrees ranging from two to five and it is shown that the increase of the nodal degree from two to three leads to high nodal degree gains, while de increase of the nodal degree from four to five leads to low nodal degree gains. These results show that degree three and degree four topologies are very attractive for use in the optical core of IP-over-WDM networks.     

新型AFM探针的制备及应用

采用熔拉 -腐蚀复合方法 ,将普通单模石英光纤制成直锥形光纤探针。利用自制工具将探针打弯 ,制成悬臂式光纤探针 ,在AFM上取得了较理想的测试结果。将自制光纤探针和商用硅材料探针获得的两种扫描图像进行了对比 ,分析了悬臂式光纤探针的特点     

三羟甲基甲胺、季戊四醇及其二元体系固-固相变的变温红外光谱研究

利用傅里叶变温红外光谱仪分别测定了三羟甲基甲胺（TAM）、季戊四醇（PE）及其二元体系变温红外谱。实验表明，多元醇分子中羟基吸收峰随温度升高耐发生位移向高波数移动，此结果既能反映多元醇及其二体系固－固相变的温度区间，又与转变热相对应，从而揭示了多元醇及其二元体系固－固相变贮热的机理。