生长条件对KDP晶体中散射颗粒的影响

利用透射电子显微技术对不同条件下生长的KDP晶体中包裹物进行了观察并测量了其相应尺寸。结果表明，晶体中的生长缺陷、pH值、生长速度和杂质与KDP晶体散射颗粒的形态存在密切关系。     

YAG激光打标机光笔中会聚出纤光的光学系统

智能化大幅面激光打标机中的光笔,采用本文叙述的光学系统会聚多模石英光纤出射的大功率YAG激光,通常能以小于0.2mm的线宽长时间连续地在工件上刻划,仔细调焦后线宽达0.1mm;手持此光笔可进行人工刻写、画及焊接电子元件等.     

A 4/7 kHz audio bandwidth selectable digital phone interface (DPI)chip with on-chip analog functions and modem

The Digital Phone Interface (DPI) is designed for a new generation of digital telephone terminals for private exchanges, This circuit gives a total solution for all telephone functions, thereby including DSP functions, voice coding/decoding and analog front end, signal generators for DTMF and ringing, a modem for data transfer between terminal and exchange and a multitude of interfaces to communicate to the external world. Besides the normal earpiece micro and speaker, handsfree operation is available by using a selectable input low-noise microphone amplifier and an additional 50 Ω mWLS driver. For the handsfree operation, a digital AGC and anti-oscillation (anti-larsen) function is implemented. The line modem generates a modified RTZ (WAL2) code and is able to cover distances up to 1.5 km. In addition, the component is extensible with external signal processing modules (echo cancelling) and is also able to transfer a 7 kHz speech bandwidth. The device is a mixed analog/digital design produced in a 1.2 μm CMOS technology on 46 mm ² die area and consumes 200 mW     

On real-time databases: concurrency control and scheduling

In addition to maintaining database consistency as in conventional databases, real-time database systems must also handle transactions with timing constraints. While transaction response time and throughput are usually used to measure a conventional database system, the percentage of transactions satisfying the deadlines or a time-critical value function is often used to evaluate a real-time database system. Scheduling real-time transactions is far more complex than traditional real-time scheduling in the sense that (1) worst case execution times are typically hard to estimate, since not only CPU but also I/O requirement is involved; and (2) certain aspects of concurrency control may not integrate well with real-time scheduling. In this paper, we first develop a taxonomy of the underlying design space of concurrency control including the various techniques for achieving serializability and improving performance. This taxonomy provides us with a foundation for addressing the real-time issues. We then consider the integration of concurrency control with real-time requirements. The implications of using run policies to better utilize real-time scheduling in a database environment are examined. Finally, as timing constraints may be more important than data consistency in certain hard realtime database applications, we also discuss several approaches that explore the nonserializable semantics of real-time transactions to meet the hard deadlines     

Effects of hot carrier induced interface state generation insubmicron LDD MOSFET's

A two-dimensional numerical simulation including a new interface state generation model has been developed to study the performance variation of a LDD MOSFET after a dc voltage stress. The spatial distribution of hot carrier induced interface states is calculated with a breaking silicon-hydrogen bond model. Mobility degradation and reduction of conduction charge due to interface traps are considered. A 0.6 μm LDD MOSFET was fabricated. The drain current degradation and the substrate current variation after a stress were characterized to compare the simulation. A reduction of the substrate current at V_g ≃0.5 V_d in a stressed device was observed from both the measurement and the simulation. Our study reveals that the reduction is attributed to a distance between a maximum channel electric field and generated interface states     

Pd-Ge contact to n-GaAs with the TiW diffusion barrier

Pd-Ge based ohmic contact to n-GaAs with a TiW diffusion barrier was investigated. Electrical analysis as well as Auger electron spectroscopy and the scanning electron microscopy were used to study the contact after it was subjected to different furnace and rapid thermal annealing and different aging steps. All analyses show that TiW can act as a good barrier metal for the Au/Ge/Pd/n-GaAs contact system. A value of 1.45 × 10⁻⁶ Ω-cm² for the specific contact resistance was obtained for the Au/TiW/Ge/Pd/n-GaAs contact after it was rapid thermally annealed at 425°C for 90 s. It can withstand a thermal aging at 350°C for 40 h with its ρ_c increasing to 2.94 × 10⁻⁶Ω-cm² and for an aging at 410°C for 40 h with its ρ_c increasing to 1.38 × 10⁻⁵ Ω-cm².     

The impact of SONET digital cross-connect system architecture ondistributed restoration

The viability of distributed control restoration using digital cross-connect systems (DCS) depends on its capability for restoring services within specified time requirements, and its economics for providing restoration compared to other alternatives. The authors report a Bellcore study for the impact of the DCS architecture on distributed restoration. This study concludes that currently proposed distributed control DCS self-healing schemes may not meet the 2 second restoration objective for large metropolitan local exchange carrier's networks, regardless of the distributed algorithm used, if the present DCS system architecture which uses serial message processing and serial path cross-connection remains unchanged. They also discuss several DCS architecture enhancement options, including a parallel processing/cross-connect DCS architecture, which may improve the service restoration time     

Design considerations for Rowland circle gratings used in photonicintegrated devices for WDM applications

Design issues of photonic integrated devices for WDM applications based on Rowland circle gratings have been studied. Effects of grating period, diffraction order, grating aperture (size), and Rowland circle size on device performance are discussed. The point spread function of a typical Rowland circle grating is evaluated numerically which yields an optical image (spot) size of several microns in diameter. Our study shows that there is a tradeoff between channel dispersion and feedback efficiency in choosing the grating period when a Rowland circle grating is used as the wavelength-selective element for a parallel-waveguide-type wavelength division multiplexing device     

Integration of mobile vehicles for automated material handlingusing Profibus and IEEE 802.11 networks

This paper focuses on a method to integrate mobile devices such as a mobile robot, automated guided vehicle, and unmanned container transporter to form an automated material handling system. In this paper, the stationary devices are connected via a Profibus network while the mobile devices are communicating via an IEEE 802.11 wireless LAN. In order to integrate these two networks, a protocol converter is developed on a PC platform that runs two interacting processes with shared internal buffers. The protocol converter performs a role of translator between two different protocols by converting the format of a data frame. In addition to this basic conversion function, the protocol converter has a virtual polling algorithm to reduce the uncertainty involved in accessing the wireless network. Finally, the integrated network. of Profibus and IEEE 802.11 is experimentally evaluated for its data latency and throughput, which shows the feasibility of the Profibus-IEEE 802.11 network for industrial applications involving mobile devices     

新型可调剪切差平行分束偏光器设计

本文给出了一种新型可调的切差平行分束偏光器设计。它调节方便,可获得较大平行分束剪切差,并可一镜多用