Amphoteric trap modeling of multidielectric scaled SONOS nonvolatile memory structures

We have characterized multidielectric scaled SONOS nonvolatile memory structures with the quasi-static linear voltage ramp (LVR) technique and dynamic pulse measurements. We have formulated physically-based ERASE/WRITE and retention methods with deep level amphoteric traps which capture and emit carriers to the bands in the silicon nitride film. Amphoteric trap parameters are extracted by the LVR technique. ERASE/WRITE and retention amphoteric trap model simulations agree well with the experimental dynamic pulse measurements. Experimental scaled SONOS structures have been fabricated with tunnel oxide X_OT=20 Å, nitride X_N=30 Å and blocking oxide X_OB=55 Å and demonstrated a static flatband shift of 3.6 V with ±5 V programming voltages. These structures may be used as the nonvolatile memory element in high density VLSI circuits.     

A 16-Mbit/s adapter chip for the IBM token-ring local area network

The authors describe a 9.02×9.02-mm chip built in 1-μm CMOS with two levels of metal and an additional mask level for fabricating capacitors. It contains both analog and digital circuits and has provisions for self-test. The function includes the transmitter, receiver, protocol handler, an microprocessor, as well as interfaces for RAM/ROM storage, IBM PC bus, IBM PS/2 bus, IBM 3174 bus, and Motorola 68000 bus. The physical design terrains are formed by 24K circuits of standard cell gates, a 10K-circuit equivalent hand-honed custom microprocessor, and an analog macro. The chip operates from a single 5-V supply, and the power consumption is 0.8 W nominal at 16 Mb/s. The chip can also be operated at 4 Mb/s     

Controlling a bunch of multiple filaments by means of a beam diameter

We demonstrate a three orders of magnitude increase and stability in the backscattered fluorescence signal from nitrogen molecules by terawatt femtosecond laser pulse induced air filaments using a new method. The method is based on squeezing the initial beam diameter using a telescope. The effect of laser shot-to-shot fluctuations was included in numerical simulations by a random distribution of the initial intensity in both squeezed and non-squeezed beams. Statistical processing of the simulation results shows that the average diameter of plasma channels as well as the total amount of free electrons generated in a bunch of multiple filaments in air is larger in the squeezed beam. Shot-to-shot stability of the simulated plasma density increases in the squeezed beam. The change of this plasma density with propagation distance is in good qualitative agreement with the change of the range-corrected nitrogen fluorescence signal with distance. PACS 42.65.Jx; 42.60.Jf; 42.68.Ay; 42.68.Wt     

Charge manipulation and imaging of the Mn acceptor state in GaAs by cross-sectional scanning tunneling microscopy

An individual Mn acceptor in GaAs is mapped by cross-sectional scanning tunneling microscopy (X-STM) at room temperature and a strongly anisotropic shape of the acceptor state is observed. An acceptor state manifests itself as a cross-like feature which we attribute to a valence hole weakly bound to the Mn ion forming the (Mn²⁺3d⁵+hole) complex. We propose that the observed anisotropy of the Mn acceptor wavefunction is due to the d-wave present in the acceptor ground state.     

Exploiting information theory for adaptive mobility and resource management in future cellular networks

We utilize tools from information theory to develop adaptive algorithms for two key problems in cellular networks: location tracking and resource management. The use of information theory is motivated by the fundamental observation that overheads in many aspects of mobile computing can be traced to the randomness or uncertainty in an individual user's movement behavior. We present a model-independent information-theoretic approach for estimating and managing this uncertainty, and relate it to the entropy or information content of the user's movement process. Information-theoretic mobility management algorithms are very simple, yet reduce overhead by /spl sim/80 percent in simulated scenarios by optimally adapting to each individual's movement. These algorithms also allow for flexible tradeoff between location update and paging costs. Simulation results demonstrate how an information-theory-motivated resource provisioning strategy can meet QoS bounds with very small wastage of resources, thus dramatically reducing the overall blocking rate.     

Analytic continuation and identities involving heat,Poisson, wave and Bessel kernels

In this article we use classical formulas involving the K–Bessel function in two variables to express the Poisson kernel on a Riemannian manifold in terms of the heat kernel. We then use the small time asymptotics of the heat kernel on certain Riemannian manifolds to obtain a meromorphic continuation of the associated Poisson kernel to all values of complex time with identifiable singularities. This result reproves in a different setting by different means a well–known theorem due to Duistermaat and Guillemin [DG 75]. Also, we develop analytic expressions for the heat kernel beyond asymptotic expansions. (© 2003 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Wavelength-scanning Talbot effect and its application for arbitrary three-dimensional step-height measurement

We demonstrate the phenomenon of Talbot self-image plane shift by tuning the wavelength of the broadband light source. A superluminescent diode (SLD) is used as a broad-band light source and an acousto-optic tunable filter (AOTF) as wavelength-scanning device. A periodic grating is illuminated by the wavelength tuned light of SLD using AOTF and Talbot self-image plane is shifted continuously in the longitudinal direction without mechanically moving the grating. The wavelength-scanning Talbot effect is then implemented for the measurement of arbitrary step-height of discontinuous objects with extended range. The main advantages of the proposed system are non-mechanical scanning, high stability because of it’s common-path geometry and compactness. Since the measurement of the phase is not required the system is free from phase ambiguity problem and therefore, the range of measurement is large as compare to interferometric techniques.     

Differential current switch logic: a low power DCVS logic family

Differential current switch logic (DCSL), a new logic family for implementing clocked CMOS circuits, has been developed. DCSL is in principle a clocked differential cascode voltage switch logic circuit (DCVS). The circuit topology outlines a generic method for reducing internal node swings in clocked DCVS logic circuits. In comparison to other forms of clocked DCVS, DCSL achieves better performance both in terms of power and speed by restricting internal voltage swings in the NMOS tree. DCSL circuits are capable of implementing high complexity high fan-in gates without compromising gate delay. Automatic lock-out of inputs on completion of evaluation is a novel feature of the circuit. Three forms of DCSL circuits have been developed with varying benefits in speed and power. SPICE simulations of circuits designed using the 1.2 μm MOSIS SCMOS process indicate a factor of two improvement in speed and power over comparable DCVS gates for moderate tree heights     

Zeeman transitions in deuterium atoms induced by ultra-relativistic electrons

We present data showing hyperfine transitions in an atomic deuterium beam induced by the (476 MHz) radio-frequency field of a 704 MeV electron beam in a storage ring. A polarized deuterium beam, produced in an atomic beam source, was crossed with a stored electron beam and analyzed with a Breit--Rabi polarimeter. Electron-beam induced transitions were singled out by injecting different combinations of hyperfine states. Transition probabilities as high as 70% were measured at large currents (~ 100 mA). All possible deuterium transitions for a radio-frequency of 476 MHz were observed. In addition, a 1--6 transition resulting from the first harmonic (952 MHz) was observed. The effects of these transitions are of general importance for the polarized internal target technique applied in nuclear and particle physics experiments. The data are reasonably described by numerical estimates. The observed mechanism can be exploited to create nuclear polarized atoms when injecting electron polarized atoms with no net nuclear polarization into a storage cell. However, when nuclear polarized atoms are injected, care should be taken to avoid this mechanism, since it would result in depolarization of the atoms. The studies enabled us to choose the magnetic guide field during our spin-dependent electron--deuteron scattering experiments, such that electron-beam induced depolarizing effects were avoided. This revised version was published online in July 2006 with corrections to the Cover Date.