Local completeness I

An infinite algebra is locally complete if its local closure is the set of all finitary operations. We give a local completeness criterion in terms of a system R of finitary relations on A such that the polymorph Pol of each R is locally incomplete and for every locally incomplete algebra A; F we have F Pol for some R. This system consists of (i) certain natural relations whose polymorphs are best possible in the sense that they are co-atoms in the lattice of locally closed incomplete algebras, (ii) five types of binary relations, (iii) one type of ternary relations and (iv) at least ternary totally reflexive and symmetric relations that are not locally central.Presented by K. A. Baker.     

An improved Sampling Strategy for the Measurement of VOCs in Air,Based on Cooled Sampling and Analysis by Thermodesorption-GC-MS/FID

Abstract

Reliable and comprehensive sampling methods are required to obtain accurate data for VOC concentrations in air samples. The major drawback of the adsorption tube sampling method, widely employed in environmental studies, is the fact that C₂ compounds are usually not trapped quantitatively.

The focus of this work was thus to improve sampling based on adsorption tubes packed with Molsieve and Carbosieve. To improve the sampling efficiency for the C₂ compounds, a cooling device, based on Peltier cooling was constructed, which could be operated at a temperature down to ?30°C.

Experiments under laboratory and field conditions were carried out to study the influence of the sampling temperatuie on the recovery of ethane and ethene as the most volatile VOCs. The results clearly demonstrate the need for a cooled sampling device for the analysis of C₂ compounds in air. Under the investigated conditions, the recoveries with ambient temperature sampling were only in the range of 38–46% for ethane and 33–59% for ethene respectively, in comparison to the cooled sampling device. These findings are only valid for the described conditions and can change significantly with temperature and concentration. A generalisation of the recovery is thus very difficult to give.

The use of the sampling device for a field study is reported, where samples were collected simultaneously at three different altitudes in a diurnal profile on the slope of the Schulterberg mountain in Tyrol (Austria).     

Rapid two-step synthesis of mitrin from heparosan: a replacement for heparin

We have engineered a two-step enzymatic synthesis of Mitrin which is a more potent and homogeneous anticoagulant than the current animal-derived heparin. This engineered heparin may have advantages of being free from animal-derived pathogens and may also have reduced side effects such as heparin induced thrombocytopenia. This approach can also be extended to tailor heparin-based drugs with improved therapeutic characteristics to treat other disorders or infections in which heparin-like molecules play a major role.     

Quantitative determination of chloride by means of flow injection analysis with spectrophotometric detection in the UV/VIS range

Chloride is determined indirectly by Spectrophotometric flow injection analysis. Two systems are compared, both based on the principle of ion exchange of easily detectable anions versus chloride from suitable mercury salts. The first method is based on the exchange of chloride with chloranilate which is detected at 332 nm or at 306 nm in neutral or in acidic medium respectively. In the second case, chloride reacts with Hg(SCN)₂. The liberated thiocyanate forms a strongly coloured complex with Fe(III) in acidic solution with an absorption maximum at 460 nm. Both methods have a detection limit of about 5 mol Cl^–/l (175 ng/ml). In the case of the thiocyanate method, the relative standard deviation is about 2% (7 measurements) in the range of 5 to 150 mol/l and decreases significantly to a value of approximately 0.2% at higher concentrations; for the chloranilate method it is 10% for lower and about 1% for higher concentrations respectively.     

Laser-printed lithium-sulphur micro-electrodes for Li/S batteries

A novel path for the preparation of electrodes for lithium-sulphur cells was developed using a very fast laser-printing setup for the direct and dry i.e., solvent-free transfer of electrode materials onto the current collectors. Model electrodes could be prepared at very small dimensions enabling these batteries to be used even in portable small devices. The initial specific charge was remarkably high at about 1300 A h kg^?1 (relating to the active material content of the electrode) with a loss of specific charge of about 75% after about 400 cycles at 1C. In addition, the dry transfer technique has highly beneficial effects on the environmental sustainability and, therefore, supports the concept of the use of “green” power storage.     

Triosmium clusters derived from the reactions of thioureas with dodecacarbonyltriosmium: Crystal structures of [Os3(CO)11{η 1-SC(NMe2)2}], [Os3(CO)9(μ-OH)(μ-OMeOCO){η 1-SC(NMe2)2}] and [(μ-H)Os3(CO)9{μ 3-NHC(S)NH2}]

The reaction of [Os₃(CO)₁₂] with tetramethylthiourea in the presence of a methanolic solution of Me₃NO·2H₂O at 60° yields the compounds [Os₃(CO)₁₁{η ¹-SC(NMe₂)₂}] (1) in 56% yield and [Os₃(CO)₉(μ-OH)(μ-MeOCO){η ¹-SC(NMe₂)₂}] (2) in 10% yield in which the tetramethylthiourea ligand is coordinatedvia the sulfur atom at an equatorial position. Compound2 is a 50 e^? cluster with two metal-metal bonds and the hydroxy and methoxycarbonyl ligands bridging the open metal-metal edge. In contrast, the analogous reaction of [Os₃(CO)₁₂] with thiourea gives the compounts [(μ-H)Os₃(CO)₁₀{μ-NHC(S)NH₂}] (3) in 8% yield and [(μ-H)Os₃(CO)₉{₃-NHC(S)NH₂}] (4) in 30% yield. In3, the thioureato ligand bridges two osmium atomsvia the sulfur atom, whereas in4 in addition to the sulfur bridge, one of the nitrogen atoms of thioureato moiety bonds to the remaining osmium atom. The decacarbonyl compounds 3 can also be obtained in 50% yield from the reaction of [Os₃(CO)₁₀(MeCN)₂] with thiourea at ambient temperature. Compound3 converts to4 (65%) photochemically. Compound1 reacts with PPh₃ and acetonitrile at ambient temperature to give the simple substitution products [Os₃(CO)₁₁(PPh₃)] and [Os₃(CO)₁₁(MeCN)], respectively, while with pyridine, the oxidative addition product [(μ-H)Os₃(CO)₁₀(μ-NC₅H₄] is formed at 80°C. All the new compounds are characterized by IR,¹-H-NMR and elemental analysis together with the X-ray crystal structures of1,2 and4. Compound1 crystallizes in the triclinic space group P $P\bar 1$ with unit cell parametersa = 8.626(3) Å,b = 11.639(3) Å,c = 12.568(3_ Å,α = 84.67(2)°,β = 75.36(2)°,γ = 79.49(3)°,V = 1199(1) ų, andZ = 2. Least-squares refinement of 4585 reflections gave a final agreement factor ofR = 0.0766 (R _w = 0.0823). Compound2 crystallizes in the monoclinic space group P2_1/n with unit cell parametersa = 9.149(5) Å,b = 17.483(5) Å,c = 15.094(4) Å,β = 91.75(2)°,V = 2413(2) ų, andZ = 4. Least-squares refinement of 3632 reflections gave a final agreement factor ofR = 0.0603 (R _w = 0.0802). Compound4 crystallizes in the monoclinic space group C2/c with unit cell parametersa = 13.915(7) Å,b = 14.718(6) Å,c = 17.109(6) Å,β = 100.44(3)°,V = 3446(5) ų, andZ = 8. Least-squares refinement of 2910 reflections gave a final agreement factor ofR = 0.0763 (R _w = 0.0863).     

A new technique for heating specimens in split-Hopkinson-bar experiments using induction-coil heaters

A new technique to heat metallic specimens, in split-Hopkinson-bar experiments, is presented. The heating is achieved with induction coils surrounding the specimen. The main advantages of this technique are (1) a relatively fast heating rate, (2) localization of the heated volume, and (3) heating achieved without touching the specimen. Experimental results for several metals, in terms of high strain-rate stress-strain curves at elevated temperatures, are presented and discussed.     

Multiview point cloud kernels for semisupervised learning [Lecture Notes]

In semisupervised learning (SSL), a predictive model is learn from a collection of labeled data and a typically much larger collection of unlabeled data. These paper presented a framework called multi-view point cloud regularization (MVPCR), which unifies and generalizes several semisupervised kernel methods that are based on data-dependent regularization in reproducing kernel Hilbert spaces (RKHSs). Special cases of MVPCR include coregularized least squares (CoRLS), manifold regularization (MR), and graph-based SSL. An accompanying theorem shows how to reduce any MVPCR problem to standard supervised learning with a new multi-view kernel.     

Very high frequency radiowave scattering by a disturbed sea surface Part I: Scattering from a slightly disturbed boundary

This paper considers the scattering of very high frequency (VHF) electromagnetic waves from a random weakly corrugated surface by the perturbation method. The calculations show that the scattering has a resonant nature, i.e., only certain Fourier components of the surface shape are responsible for scattering in every given direction. Experiments carried out in a water basin confirmed the results of the calculations. The backscattered intensity is proportional to the spectral density of those Fourier components of the surface oscillation that have a resonant space period. In these experiments, resonant maxima of the reflected signal corresponding to the second-order approximation of the perturbation method were also observed. The frequency spectrum of the scattered electromagnetic field is also investigated. It is shown that the spectrum of the scattered radiation is shifted from the incident frequency by a certain value related to the phase velocity of the resonantly scattering Fourier component of the surface shape. The experimentally observed dependence of the scattered intensity on frequency and the theoretically predicted one are very much alike.