Synthesis of imidazo[4,5-d]pyridazine nucleosides related to inosine

Several imidazo[4,5-d]pyridazine nucleosides which are structurally similar to inosine were synthesized. Anhydrous stannic chloride-catalyzed condensation of persilylated imidazo[4,5-d]-pyridazin-4(5H)one (1) and imidazo[4,5-d]pyridazine-4,7(5H,6H)dione ( 16 ) with 1-O-acetyl-2,3,5-tri-O-benzoyl-β-D-ribofuranose ( 3 ) provided (after sodium methoxide deblocking) 6-β-D-ribo furanosylimidazo[4,5-d]pyridazin-4(5H)one (5) and 3,6-di-(β-D-ribofuranosyI)imidazo[4,5-d]pyridazin-4-one ( 7 ); and 1-(β-D-ribofuranosyl)imidazo[4,5-d]pyridazine-4,7(5H,6H)dione ( 19 ) and 1,5 or 6-di-(β-D-ribofuranosyl)imidazo[4,5-d ]pyridazine-4,7(5H or 6H)dione ( 21 ), respeeitvely. 4,7-Diehloro-1-β-D-ribofuranosylimidazo[4,5-d]pyridazine ( 12 ) and dimethyl 1-β-D-ribofuranosylimidazole-4,5-dicarboxylate ( 26 ), both prepared from stannic chloride-catalyzed ribosylations of the corresponding heterocycles, were converted in several steps to 3-β-D-ribo-furanosy limidazo[4,5-d]pyridazin-4(5H)one ( 14 ) and nucleosidc 19 , respectively. Acid-catalyzed isopropylidenation of mesomeric betaine 7 or nuclcoside 14 provided 3-(2,3-isopropylidene-β-D-ribofuranosyl)imidazo[4,5-d]pyrizin-4(5H)one ( 31 ). 1-β-D-Ribofuranosylimidazo[4,5-d]-pyridazine ( 29 ) was obtained in several steps from nueleoside 12 . The structure of the nucleosides was established by the use of carbon-13 and proton nmr.     

Synthesis of 3- and 4-(β-D-ribofuranosyl)-s-triazolo[2,3-a] pyrimid-7-one,isomers of inosine containing a bridgehead nitrogen atom

The first synthesis of a purine nucleoside analog containing a bridgehead nitrogen atom is here reported. The direct glycosylation of the trimethylsilyl derivative of s-triazolo[2,3-a] pyrimid-7-one has been shown to give 3-(β-D-ribofuranosyl)-s-triazolo[2,3-a]pyrimid-7-one (V) and 4-(β-D-ribof'uranosyl)-s-lriazolo[2,3-α]pyrimid-7-one (VII). The nueleoside V may he considered a close analog of inosine in which the nitrogen N₁ and C₅ of inosine have been interchanged. Bro-minalion of the tri-O-acelyl derivative IV gave, after deblocking, 6-bromo-3-(β-D-ribofurnaosyl)-s-triazolo[2,3-a] pyrimid-7-one (IX). Structural assignments of the nucleosides were made on the basis of comparison of the ultraviolet absorption spectral characteristics with 3-methyl-s-triazolo-[2,3-a]pyrimid-7-one (XI) and 4-methyl-s-lriazolo[2,3-a Jpyrimid-7-one (XII) prepared by a standard procedure from 7-methoxy-s-triazolo(2,3-a] pyrimidine (X).     

New Organotin Compounds Including a Tin–Zinc Bond

Abstract

The reaction of dialkyltinhydrides with dialkylzinc results in a tin metal bond formation. Crystal structures of 1,1,1,2,3,3,3-hepta-phenyl-2-(ethylzincio)tristannane *TMEDA 1, 1,1,2,2,3,3,4,4-octaphenyl-1,4-(ethylzincio)tetrastannane*2TMEDA 2, and triphenyl(phenylzincio)stannane*TMEDA 3 could be obtained.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.

GRAPHICAL ABSTRACT     

Radiation Curing of Coatings

Abstract

Printing inks, paints, and other coatings are applied as a liquid or paste but must change to a solid and nontacky state before the painted or coated article can be used. The change is known as curing or drying. Sometimes it occurs by physical means, the evaporation of a solvent or dispersion medium for example, and sometimes by chemical changes such as polymerization and cross-linking. These chemical processes connect the many relatively small molecules of the original liquid or paste into a large molecular network or insoluble solid, which may be either rigid or rubbery in consistency depending upon the requirements of a particular application. Among traditional materials, gravure inks and many lacquers dry by solvent evaporation while paints and inks based upon linseed oil “dry” by chemical cross-linking promoted by oxygen in the air. Considerable time is usually required for curing in both methods, and the evaporation of solvents can result in air pollution and potential fire hazards. There is also a tendency of the media to dry upon presses, brushes, sprayers, and other application equipment. The long cure time requirement raises difficulties in modern production lines; the other factors have become more acute since the rapid rise of petroleum prices and the advent of air pollution legislation.     

Preparation,X-ray crystallography,and thermolysis of phenylenediammonium dibromide salts

Phenylenediammonium dibromide (PDADBr) salts have been prepared and characterized by X-ray crystallography. The thermal decomposition of PDADBr has been studied by thermogravimetry (TG) and differential thermal analysis (DTA). Kinetic parameters have been evaluated using model fitting and isoconversional methods. The thermolytic pathways have also been suggested which involve proton transfer as a primary step to regenerate parent amine and HBr. Interaction between amine and HBr at higher temperature yields gaseous products.     

The hydrological response of heavy clay grassland soils to rainfall in south‐west England using δ2H

Stable isotopes of water have been previously used in catchment studies to separate rain‐event water from pre‐event groundwater. However, there are a lack of studies at the smaller scale looking at the separation of event water from pre‐event water. This is particularly relevant for heavy clay soil systems through which the movement of water is uncertain but is thought to be rainwater‐dominated. The data presented here were collected at a rural site in the south‐west of England. The historic rainfall at the site was isotopically varied but similar to the global meteoric water line, with annual weighted means of ?37‰ for δ²H and ?5.7‰ for δ¹⁸O and with no seasonal variation. Drainage was sampled from the inter‐flow (surface runoff + lateral through‐flow) and drain‐flow (55 cm deep mole drains) pathways of two 1 ha lysimeters during two rainfall events, which had δ²H values of ?68‰ and ?92‰, respectively. The δ²H values of the lysimeter drainage water suggest that there was no contribution of event water during the first, small discharge (Q) event; however, the second larger event did show isotopic variation in δ²H values negatively related to Q indicating that rainwater was contributing to Q. A hydrograph separation indicated that only 49–58% of the inter‐flow and 18–25% of the drain‐flow consisted of event water. This was surprising given that these soil types are considered retentive of soil water. More work is needed on heavy clay soils to understand better the nature of water movement from these systems. Copyright © 2010 John Wiley & Sons, Ltd.     

Expeditious synthesis of TADDOL-derived phosphoramidite and phosphonite ligands

A simple and reliable protocol for the synthesis of TADDOL-derived monodentate ligands is reported. The reaction of the requisite TADDOL with PCl₃ is immediately followed by the treatment of the crude intermediate with both nitrogen and carbon nucleophiles. Several previously unknown or difficult-to-make phosphoramidite and phosphonite ligands L1–L3 and L4–L9 were accessed using this novel procedure.     

Response to “Comment on paper ‘The bulk modulus and Poisson's ratio of “incompressible” materials’”

The incorrectness of the common assumption that rubbery polymers are incompressible does not preclude its yielding accurate determinations of the elastic modulus for nonlinear deformations.     

Water intake of cellulose materials monitored by positron annihilation lifetime spectroscopy

Cellulose - In this study, for the first time, the experimental technique of positron annihilation lifetime spectroscopy (PALS) has been applied to monitor in situ the microstructural changes of...