A new erasing method for a single-voltage long-endurance flashmemory

A new method to erase a standard (double-poly, stacked-gate NOR-type) flash cell is proposed. The method, still using the tunneling mechanism to extract electrons from the floating gate, is based on the concept of keeping the electric field constant during the whole erasing operation. The new method has two main advantages with respect to the conventional one: (1) it does not depend on the supply voltage variation and (2) it allows a better reliability in terms of endurance-induced stress. Results have shown that flash device performances are greatly improved in terms of stability and endurance reliability up to one million cycles     

Ultralow-voltage boron-doped diamond field emitter vacuum diode

A boron-doped diamond field emitter diode with ultralow turn-on voltage and high emission current is reported. The diamond field emitter diode structure with a built-in cap was fabricated using molds and electrostatic bonding techniques. The emission current versus anode voltage of the capped diamond emitter diode with boron doping, sp² content, and vacuum thermal electric (VTE) treatment shows a very low turn-on voltage of 2 V. A high emission current of 1 μA at an anode voltage of less than 10 V can be obtained from a single diamond tip. The turn-on voltage is significantly lower than comparable silicon field emitters     

Die zweite Phase der Feldbusentwicklung

The past decade may be regarded as the phase of the fundamental developments in fieldbus systems that were based on the OSI model. Today we are entering a second stage. It is the objective of this issue to present the current state and where the further developments will lead to. This introductory article is intended to give an overview on the subject.     

Polarization control in a vertical cavity surface emitting laser submitted to optical feedback

We study experimentally and theoretically two polarization effects in a vertical cavity surface emitting laser submitted to optical feedback. In a first experiment, we obtain flips between two linearly polarized laser modes up to a frequency of 50 MHz using an external cavity with a polarizer. In a second experiment, polarization self modulation is demonstrated up to a frequency of 2.6 GHz, using a quarter wave plate instead. Numerical calculations, based on a four levels model for the active medium, show a good agreement with the experiments.     

Efficient Sequential Quadratic Programming Implementations for Equality-Constrained Discrete-Time Optimal Control

Efficient sequential quadratic programming (SQP) implementations are presented for equality-constrained, discrete-time, optimal control problems. The algorithm developed calculates the search direction for the equality-based variant of SQP and is applicable to problems with either fixed or free final time. Problem solutions are obtained by solving iteratively a series of constrained quadratic programs. The number of mathematical operations required for each iteration is proportional to the number of discrete times N. This is contrasted by conventional methods in which this number is proportional to N ³. The algorithm results in quadratic convergence of the iterates under the same conditions as those for SQP and simplifies to an existing dynamic programming approach when there are no constraints and the final time is fixed. A simple test problem and two application problems are presented. The application examples include a satellite dynamics problem and a set of brachistochrone problems involving viscous friction.     

Reaction of 3,5-diamino-4-nitropyrazole with electrophilic reagents

The interaction of 3,5-diamino-4-nitropyrazole with such electrophilic reagents as acetic anhydride, dimethylformamide acetal, orthoformic ester, and ketones has been studied. Derivatives of pyrazolol[1,5-a]pyrimidines were formed on reaction with 1,3-diketones and some of their properties have been studied.Center for Drug Chemistry, All-Russian Chemical and Pharmaceutical Research Institute (VNIKhFI), Moscow 119815. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 329–335, March, 1997.     

Symbol rate and modulation level-controlled adaptivemodulation/TDMA/TDD system for high-bit-rate wireless data transmission

This paper proposes a time-division multiple-access/time-division duplex (TDMA/TDD)-based symbol rate and modulation level-controlled adaptive modulation system for high-bit-rate data transmission. The proposed system controls both the symbol rate and modulation level for the next transmission time slot according to the estimated carrier power to noise spectral density ratio (C/N₀) and delay spread for the time slot to achieve higher bit rate and higher transmission quality as well as higher delay-spread immunity. It is demonstrated by computer simulation and laboratory experiments that the proposed system can achieve a higher average bit rate with higher transmission quality in comparison with the fixed-rate quaternary phase-shift keying (QPSK) system and modulation level-controlled adaptive modulation system in both flat Rayleigh and frequency-selective fading environments. The simulated and experimental results also show that the proposed adaptive modulation techniques can be applied to 1-2-Mb/s indoor and outdoor microcellular systems with its delay spread of up to 250 ns and its terminal mobility of up to pedestrian speed without employing any special antifrequency-selective fading techniques, such as the adaptive equalizer and space diversity     

Motion Perception Using Analog VLSI

Motion perception is arguably a fundamental mechanism used by natural species to accomplish a number of tasks, such as navigating freely in an unknown environment. Traditional motion perception methods tend to be computationally intensive, requiring powerful computers and large memories. However, by copying biological mechanisms, such as elementary motion discrimination at the early stages of the visual processing paths, it should be possible to build small and efficient motion perception systems. This paper describes the manner in which a simple motion perception model based on the insect visual system has been implemented using mixed analog/digital VLSI. The device has been fabricated in a 2 micron double metal, double polysilicon process, and comprises 61 photo-detectors, and associated analog and digital circuitry. While not entirely successful in that component mismatches hamper the detection of dark-to-bright changes in contrast, the results clearly show the feasibility of using such a device in autonomous control systems.     

Pattern recognition using discriminative feature extraction

We propose a new design method, called discriminative feature extraction for practical modular pattern recognizers. A key concept of discriminative feature extraction is the design of an overall recognizer in a manner consistent with recognition error minimization. The utility of the method is demonstrated in a Japanese vowel recognition task