Samarium as a Schottky barrier on p-type-silicon

The electrical and structural characteristics of the samarium-silicon contact have been investigated after thermal treatments up to 300°C for 30 min in vacuum. Good Schottky barriers have been realized for treatments up to 200°C obtaining a barrier height of 0.70 eV. The electrical barrier properties degrade at temperatures above 250°C, where a continuous Layer of SmSi_1.7 is formed.     

Electrodes/Electrolyte Interfaces in the Presence of a Surface‐Modified Photopolymer Electrolyte: Application in Dye‐Sensitized Solar Cells

Since hundreds of studies on photoanodes and cathodes show that the electrode/electrolyte interfaces represent a key aspect at the base of dye‐sensitized solar cell (DSSC) performances, it is reported here that these interfaces can be managed by a smart design of the spatial composition of quasi‐solid electrolytes. By means of a cheap, rapid, and green process of photoinduced polymerization, composition‐tailored polymer electrolyte membranes (PEMs) with siloxane‐enriched surfaces are prepared, and their properties are thoroughly described. When assembled in DSSCs, the interfacial action promoted by the composition‐tailored PEMs enhances the photocurrent and fill factor values, thus increasing the global photovoltaic conversion efficiency with respect to the non‐modified PEMs. Moreover, the presence of the siloxane‐chain‐enriched surface increases the hydrophobicity and reduces the water vapor permeation into the device, thus enhancing the cell′s durability.     

Synthesis of 3‐Butadienyl‐1‐tosylpyrroles

A pathway for the formation of 3‐butadienyl‐1‐tosylpyrroles from 3‐acyl derivatives via secondary and tertiary 3‐hydroxyalkyl‐1‐tosylpyrroles has been developed. The dehydration of the alcohols intermediates is the crucial step: conditions for high chemo‐ and diastereocontrol are described.     

The use of the capillary rheometer for the rheological evaluation of extrudable cement-based materials

In this paper, the rheological properties of an extrudable cement-based paste are investigated by means of an original ram extrusion apparatus (capillary rheometer). The experimental results indicate that a careful measurement of the die pressure is necessary to obtain a realistic viscosity vs shear rate curve, as required in extrusion technology. In particular, it is shown that the optimal test configuration is when the pressure measurement is made directly inside the rheometer die. By applying this rheological methodology in steady-state conditions, it has been observed that the extrudable cement-based material here evaluated obeys to a simple power–law equation, in the range of shear rates investigated, which are suitable for an industrial extrusion process. This paper was presented at the third Annual European Rheology Conference (AERC) held in Hersonissos, Crete, Greece, April 24–27, 2006.     

Environmentally friendly homocoupling reaction of functionalized potassium aryl trifluoroborates salts in aqueous media

The homocoupling reaction between potassium aryl trifluoroborates containing different functionalities promoted by a catalytic amount of Pd(OAc)₂ is described. The methodology uses water as a solvent under aerobic conditions to give the corresponding biaryl compounds in good yields.     

Chemical strategies and characterization tools for the organization of single molecule magnets on surfaces

Addressing individual bistable magnetic molecules, known as Single Molecule Magnets (SMMs), is a fascinating goal at the borderline between molecular magnetism and spin electronics. This tutorial review focuses on the first step towards single-molecule experiments, namely the organization of SMMs on surfaces. Both preparation and characterization of surface-supported SMMs prove to be quite demanding and a multidisciplinary approach is necessary, which is described here using selected examples. We first illustrate the chemical strategies devised to assemble SMMs and to control their orientation on surfaces. Then, we present characterization tools, which have been selected on the basis of their relevance to address specific points, i.e. the chemical composition of the deposited SMM films, the organization of the molecules on the surface, the intramolecular arrangement of the spins, the magnetic anisotropy of SMMs, and eventually the dynamics of their magnetization on surfaces. Particular attention is devoted to techniques exploiting synchrotron light.     

Multifrequency electron paramagnetic resonance characterization of PpoA, a CYP450 fusion protein that catalyzes fatty acid dioxygenation

PpoA is a fungal dioxygenase that produces hydroxylated fatty acids involved in the regulation of the life cycle and secondary metabolism of Aspergillus nidulans . It was recently proposed that this novel enzyme employs two different heme domains to catalyze two separate reactions: within a heme peroxidase domain, linoleic acid is oxidized to (8R)-hydroperoxyoctadecadienoic acid [(8R)-HPODE]; in the second reaction step (8R)-HPODE is isomerized within a P450 heme thiolate domain to 5,8-dihydroxyoctadecadienoic acid. In the present study, pulsed EPR methods were applied to find spectroscopic evidence for the reaction mechanism, thought to involve paramagnetic intermediates. We observe EPR resonances of two distinct heme centers with g-values typical for Fe(III) S = (5)/(2) high-spin (HS) and Fe(III) S = (1)/(2) low-spin (LS) hemes. (14)N ENDOR spectroscopy on the S = (5)/(2) signal reveals resonances consistent with an axial histidine ligation. Reaction of PpoA with the substrate leads to the formation of an amino acid radical on the early millisecond time scale concomitant to a substantial reduction of the S = (5)/(2) heme signal. High-frequency EPR (95- and 180-GHz) unambiguously identifies the new radical as a tyrosyl, based on g-values and hyperfine couplings from spectral simulations. The radical displays enhanced T(1)-spin-lattice relaxation due to the proximity of the heme centers. Further, EPR distance measurements revealed that the radical is distributed among the monomeric subunits of the tetrameric enzyme at a distance of approximately 5 nm. The identification of three active paramagnetic centers involved in the reaction of PpoA supports the previously proposed reaction mechanism based on radical chemistry.     

Chemical basis of peptidoglycan discrimination by PrkC, a key kinase involved in bacterial resuscitation from dormancy

Bacterial Ser/Thr kinases modulate a wide number of cellular processes. In Bacillus subtilis , the Ser/Thr kinase PrkC has been shown to induce germination of bacterial spores in response to DAP-type but not Lys-type cell wall muropeptides. Muropeptides are a clear molecular signal that growing conditions are promising, since they are produced during cell wall peptidoglycan remodeling associated with cell growth and division of neighboring bacteria. However, whether muropeptides are able to bind the protein physically and how the extracellular region is able to distinguish the two types of muropeptides remains unclear. Here we tackled the important question of how the extracellular region of PrkC (EC-PrkC) senses muropeptides. By coupling NMR techniques and protein mutagenesis, we exploited the structural requirements necessary for recognition and binding and proved that muropeptides physically bind to EC-PrkC through DAP-moiety-mediated interactions with an arginine residue, Arg500, belonging to the protein C-terminal PASTA domain. Notably, mutation of this arginine completely suppresses muropeptide binding. Our data provide the first molecular clues into the mechanism of sensing of muropeptides by PrkC.     

Development and validation of a high-performance liquid chromatography-tandem mass spectrometry method for the determination of the novel inhibitor of angiogenesis E-3810 in human plasma and its application in a clinical pharmacokinetic study

E-3810, 6-[[7-[(1-aminocyclopropyl)methoxy]-6-methoxy-4-quinolyl]oxy]-N-methyl-naphthalene-1-carboxamide, is a novel, potent, dual inhibitor of vascular endothelial growth factor and fibroblast growth factor receptors with antiangiogenic properties, now under early clinical evaluation as an anticancer agent. To investigate its clinical pharmacokinetics, a high-performance liquid chromatography-tandem mass spectrometry method was developed and validated to measure the drug in human plasma on the basis of simple protein precipitation with methanol after addition of deuterated E-3810 as internal standard. The method requires a small volume of sample (100 μl) and is rapid and selective, allowing good resolution of peaks in 5 min. It is sensitive, precise, and accurate, with overall precision, expressed as CV%, always ≤7.1%, accuracy in the range 92.7%-104.4%, and high recovery, close to 100%. The limit of detection is 0.01 ng/ml, and the lower limit of quantitation is 2.0 ng/ml. The assay was validated in the range from the lower limit of quantitation up to 500.0 ng/ml. This is the first method developed and validated for analyzing E-3810 in human plasma. The method has been successfully applied to study E-3810 pharmacokinetics in cancer patients with solid tumors who are receiving daily oral doses of the drug during the phase I trial.