Use of a watershed model to characterize the fate and transport of fluometuron,a soil-applied cotton herbicide,in surface water

The Soil and Water Assessment Tool (SWAT) was used to characterize the fate and transport of fluometuron (a herbicide used on cotton) in the Bogue Phalia Basin in northwestern Mississippi, USA. SWAT is a basin-scale watershed model, able to simulate hydrological, chemical, and sediment transport processes. After adjustments to a few parameters (specifically the SURLAG variable, the runoff curve number, Manning's N for overland flow, soil available water capacity, and the base-flow alpha factor) the SWAT model fit the observed streamflow well (the Coefficient of Efficiency and R ² were greater than 60). The results from comparing observed fluometuron concentrations with simulated concentrations were reasonable. The simulated concentrations (which were daily averages) followed the pattern of observed concentrations (instantaneous values) closely, but could be off in magnitude at times. Further calibration might have improved the fit, but given the uncertainties in the input data, it was not clear that any improvement would be due to a better understanding of the input variables.     

A Novel Cyclic Carbamate from the Acid-Catalyzed Reaction of D-Glucose and Urea

Abstract

The acid-catalyzed reaction of D-glucose with urea in a phenol-water solution has provided α-D-glucopyranosylamine 1,2-(cyclic carbamate) (1). The use of ¹H-¹³C correlated NMR spectroscopy involving indirectly-bonded hydrogens and carbons proved to be indispensable in determining the structure.     

Hemostatic efficacy and tissue reaction of oxidized regenerated cellulose hemostats

Oxidized regenerated cellulose (ORC) has been used as an absorbable hemostat since World War II. In the present study, hemostasis time was determined in a spleen incision model in swine. The effect of mass on absorbable hemostat efficacy and hemostasis time was evaluated by standardizing the ORC materials on a mass basis. The median hemostasis time for a single layer of the new nonwoven ORC was as much as 51 % shorter than woven ORC (P < 0.001). The mean hemostasis time for nonwoven ORC was not affected by the mass of hemostat applied to the wound. The hemostatic efficacy of woven ORC increased with the mass (layers) of hemostat applied to the wound. Nonwoven ORC is significantly faster in achieving hemostasis than woven ORC, and its hemostatic efficacy is not influenced by the mass of material applied. Tissue reaction was minimal and the material was fully absorbed by 14 days.     

Nourdin–Peccati analysis on Wiener and Wiener–Poisson space for general distributions

Given a reference random variable, we study the solution of its Stein equation and obtain universal bounds on its first and second derivatives. We then extend the analysis of Nourdin and Peccati by bounding the Fortet–Mourier and Wasserstein distances from more general random variables such as members of the Exponential and Pearson families. Using these results, we obtain non-central limit theorems, generalizing the ideas applied to their analysis of convergence to Normal random variables. We do these in both Wiener space and the more general Wiener–Poisson space. In the former space, we study conditions for convergence under several particular cases and characterize when two random variables have the same distribution. In the latter space we give sufficient conditions for a sequence of multiple (Wiener–Poisson) integrals to converge to a Normal random variable.     

Preparation and evaluation of monolithic poly(N-vinylcarbazole-co-1,4-divinylbenzene) capillary columns for the separation of small molecules

Short-term polymerization or the so-called low-conversion polymerization was applied for the preparation of N-vinylcarbazole (NVC) and 1,4-divinylbenzene (DVB) monolithic capillary columns. The synthesis was carried out by thermally initiated free radical copolymerization under the influence of inert micro- (toluene) and macroporogen (1-decanol) and α,α′-azoisobutyronitrile (AIBN) as radical initiator. The morphological and porous properties were studied by scanning electron microscopy (SEM), nitrogen adsorption, and mercury intrusion porosimetry (MIP). The copolymerization process was studied by monomer conversion measurements. This approach led to increased porosity and specific surface area. A specific surface area above 400 m²/g of the monolith and a distinct bimodal pore size distribution were obtained. The chromatographic performance was determined in terms of theoretical plate heights and number of theoretical plates. The lowest plate height value was found to be 3.9 μm (corresponding to ≈256,000 plates per meter) applying methylparaben utilizing an 80 mm?×?0.2 mm i.d. monolithic capillary. The developed NVC/DVB monolithic supports showed high separation efficiency towards small molecules, which was exemplified applying reversed-phase (RP) separation of alkylbenzenes, beta-blockers, flavanoids, parabens, and phenones. The loading capacity was analyzed for isocratic separation of seven alkylbenzenes and was found to be up to 77 ng total mass of alkylbenzenes. Furthermore, a long-term stability test of 1,000 consecutive runs was performed and resulted in a maximum variance of 0.97, 0.85, and 0.16 % RSD for resolution, peak width at half height, and retention times, respectively. The material was proven to have a high permeability of 1.11E?14 m², applying water as a mobile phase.     

Morphological Investigation of Midblock‐Sulfonated Block Ionomers Prepared from Solvents Differing in Polarity

Recent developments regarding charged multiblock copolymers that can form physical networks and exhibit robust mechanical properties herald new and exciting opportunities for contemporary technologies requiring amphiphilic attributes. Due to the presence of strong interactions, however, control over the phase behavior of such materials remains challenging, especially since their morphologies can be solvent‐templated. In this study, transmission electron microscopy and microtomography are employed to examine the morphological characteristics of midblock‐sulfonated pentablock ionomers prepared from solvents differing in polarity. Resultant images confirm that discrete, spherical ion‐rich microdomains form in films cast from a relatively nonpolar solvent, whereas an apparently mixed morphology with a continuous ion‐rich pathway is generated when the casting solvent is more highly polar. Detailed 3D analysis of the morphological characteristics confirms the coexistence of hexagonally‐packed nonpolar cylinders and lamellae, which facilitates the diffusion of ions and/or other polar species through the nanostructured medium.

     

Lensless diffractive imaging using tabletop coherent high-harmonic soft-X-ray beams

We present the first experimental demonstration of lensless diffractive imaging using coherent soft x rays generated by a tabletop soft-x-ray source. A 29 nm high harmonic beam illuminates an object, and the subsequent diffraction is collected on an x-ray CCD camera. High dynamic range diffraction patterns are obtained by taking multiple exposures while blocking small-angle diffraction using beam blocks of varying size. These patterns reconstruct to images with 214 nm resolution. This work demonstrates a practical tabletop lensless microscope that promises to find applications in materials science, nanoscience, and biology.     

Twisted Poincaré Duality for some Quadratic Poisson Algebras

We exhibit a Poisson module restoring a twisted Poincaré duality between Poisson homology and cohomology for the polynomial algebra endowed with Poisson bracket arising from a uniparametrised quantum affine space. This Poisson module is obtained as the semiclassical limit of the dualising bimodule for Hochschild homology of the corresponding quantum affine space. As a corollary we compute the Poisson cohomology of R, and so retrieve a result obtained by direct methods (so completely different from ours) by Monnier. This research of the first author was supported by a Marie Curie Intra-European Fellowship within the 6th European Community Framework Programme. The second author was supported by EPSRC Grant EP/D034167/1.     

Fast Photochemical Oxidation of Proteins (FPOP) Maps the Epitope of EGFR Binding to Adnectin

Epitope mapping is an important tool for the development of monoclonal antibodies, mAbs, as therapeutic drugs. Recently, a class of therapeutic mAb alternatives, adnectins, has been developed as targeted biologics. They are derived from the 10th type III domain of human fibronectin (¹⁰Fn3). A common approach to map the epitope binding of these therapeutic proteins to their binding partners is X-ray crystallography. Although the crystal structure is known for Adnectin 1 binding to human epidermal growth factor receptor (EGFR), we seek to determine complementary binding in solution and to test the efficacy of footprinting for this purpose. As a relatively new tool in structural biology and complementary to X-ray crystallography, protein footprinting coupled with mass spectrometry is promising for protein–protein interaction studies. We report here the use of fast photochemical oxidation of proteins (FPOP) coupled with MS to map the epitope of EGFR-Adnectin 1 at both the peptide and amino-acid residue levels. The data correlate well with the previously determined epitopes from the crystal structure and are consistent with HDX MS data, which are presented in an accompanying paper. The FPOP-determined binding interface involves various amino-acid and peptide regions near the N terminus of EGFR. The outcome adds credibility to oxidative labeling by FPOP for epitope mapping and motivates more applications in the therapeutic protein area as a stand-alone method or in conjunction with X-ray crystallography, NMR, site-directed mutagenesis, and other orthogonal methods. Figure

?