Wavelength selection for low-saturation pulse oximetry

Conventional pulse oximeters are accurate at high oxygen saturation under a variety of physiological conditions but show worsening accuracy at lower saturation (below 70%). Numerical modeling suggests that sensors fabricated with 735 and 890 nm emitters should read more accurately at low saturation under a variety of conditions than sensors made with conventionally used 660 and 900 nm band emitters. Recent animal testing confirms this expectation. It is postulated that the most repeatable and stable accuracy of the pulse oximeter occurs when the fractional change in photon path lengths due to perturbations in the tissue (relative to the conditions present during system calibration) is equivalent at the two wavelengths. Additionally, the penetration depth (and/or breadth) of the probing light needs to be well matched at the two wavelengths in order to minimize the effects of tissue heterogeneity. At high saturation these conditions are optimally met with 660 and 900 nm band emitters, while at low saturation 735 and 890 nm provide better performance     

Estimating local mean signal strength of indoor multipathpropagation

We explore techniques for the measurement of local mean signal strength at 900 MHz and 2 GHz. In particular, we characterize the impact of transmitter and receiver antenna rotation on the estimated local mean. Then, we explore the collection of high resolution data while moving along a linear trajectory and using linear averaging techniques to estimate the local mean. With this information, the best measurement techniques can be chosen depending on the required speed versus accuracy tradeoff. Finally, we use a ray tracing propagation model to evaluate different methods of calculating the local mean signal strength for indoor environments     

Large offset far infrared laser lines generation from the C-O stretching Q-branch of 13CD3OD

2 laser of wide tunability to pump ¹³CD₃OD we could observe 10 new far infrared laser lines ranging from 109 μm to 472 μm. The lines were generated by pumping infrared absorbing transitions of large offset appertaining to the C-O stretching Q-branch. All lines were characterised in wavelength, polarisation, optimum pressure of operation and precise offset measurements. Received: 17 September 1996/Revised version: 18 November 1996     

Electrical linewidth test structures fabricated in monocrystallinefilms for reference-material applications

The physical widths of reference features incorporated into electrical linewidth test structures patterned in films of monocrystalline silicon have been determined from Kelvin voltage measurements. The films in which the test structures are patterned are electrically insulated from the bulk-silicon substrate by a layer of silicon dioxide provided by SIMOX (Separation by the IMplantation of OXygen) processing. The motivation is to facilitate the development of linewidth reference materials for critical-dimension (CD) metrology-instrument calibration. The selection of the (110) orientation of the starting silicon and the orientation of the structures' features relative to the crystal lattice enable a lattice-plane-selective etch to generate reference-feature properties of rectangular cross section and atomically planar sidewalls. These properties are highly desirable for CD applications in which feature widths are certified with nanometer-level uncertainty for use by a diverse range of CD instruments. End applications include the development and calibration of new generations of CD instruments directed at controlling processes for manufacturing devices having sub-quarter-micrometer features     

Effect of iodine sorption on the free volume of polycarbonate

 The effect of iodine sorption on the free volume of polycarbonate is investigated by Positron Annihilation Lifetime method. The observed results are interpreted in terms of the Charge Transfer Complex formation and precipitation of iodine at the initial and final stages of sorption, respectively. At higher levels of sorption, changes in the second lifetime and its intensity seem to suggest a conformational transformation, probably due to the net change in the amorphous-crystalline boundary regions of the polymer matrix. The free volume cavities have been predominantly occupied by I^- ₃ species and the diffusion process obeys Fick’s law. An exponential type correlation has been observed between fractional free volume and the diffusion coefficient. Received: 13 June 1996/Accepted: 20 September 1996     

Low-truncation-error finite difference equations for photonicssimulation. II. Vertical-cavity surface-emitting lasers

For part I see, ibid., p. 134, 1998. The basic approach outlined in the previous article is applied to the difficult problem of computing the optical modes of a vertical-cavity surface-emitting laser. The formulation utilizes a finite difference equation based upon the lowest order term of an infinite series solution of the scalar Helmholtz equation in a local region. This difference equation becomes exact in the one-dimensional (1-D) limit, and is thus ideally suited for nearly 1-D devices such as vertical-cavity lasers. The performance of the resulting code is tested on both a simple cylindrical cavity with known solutions and an oxide-confined vertical-cavity laser structure, and the results compared against second-order-accurate code based upon Crank-Nicolson differencing     

On the reliability of Landsat TM for estimating forest variables byregression techniques: a methodological analysis

In order to build models that relate thematic mapper (TM) imagery to field forest variables, several regression techniques, such as the ones based on the Mallows' C_p and the adjusted R² statistics, were applied. Nevertheless, although the best created models had good fittings (R²>0.65) apparently supported by a clear statistical significance (p<0.0001), later trials tested with additional plots showed that these models were, in fact, nonrobust models (models with very low-predictive capabilities). Two factors were pointed out as causes of these inconsistencies between predicted and observed values: a relatively small number of available field plots and a relatively high number of possible independent variables. Actually, different trials suggested much lower fittings for the expected “really” predictive models. Some restrictions of TM satellite data, such as its radiometric, spectral, and spatial limitations, together with restrictions arising from gathering and processing of field data, might have led to these poor relations. This study shows the need for guarantees stronger than the usual ones before concluding that there is a clear possibility of using satellite information to estimate forest parameters by means of regression techniques     

A poincaré-bendixson theorem for analytic families of vector fields

We provide a characterization of the limit periodic sets for analytic families of vector fields under the hypothesis that the first jet is non-vanishing at any singular point. Also, applying the family desingularization method, we reduce the complexity of some of these sets.     

Influence of the sulfonate countercation on the thermal stability of nafion perfluorosulfonate membranes

We report a strong dependence of the thermal stability of Nafion® perfluorosulfonate ionomer on the nature of the counterion associated with the fixed sulfonate site. These results were obtained using thermal gravimetric analysis on a series of alkali metal and alkyl ammonium cation-exchanged Nafion films. We have found that the temperature of decomposition of Nafion is inversely dependent on the size of the exchanged cation; i.e., Nafion films show improved thermal stability as the size of the counter cation decreases. We attribute this inverse relationship of thermal stability with counterion size to an initial decomposition reaction which is strongly influenced by the strength of the sulfonate-coun-terion interaction. © 1993 John Wiley & Sons, Inc.