一种在秘密共享中骗子的检测方案

提出了一种能正确确定欺骗者的方案。此方案具有在验证时运算简单、快速的特点。对此方案的攻击如同大数分解一样困难。     

HL－1装置辅助加热等对能量约束的影响

在ＨＬ－１托卡马克上进行了辅助加热、加料、电流驱动的物理实验研究。在改善等离子体约束方面，某些实验取得了较好的结果。在适当的稳定放电条件下，低杂波电流驱动和弹丸注入辅助加料，均能使等离子体能量约束得到一定程度的改善，与相同密度条件下的欧姆加热放电相比，能量约束时间提高了约３０％。在电子回旋共振加热等离子体实验中，等离子体总能量明显增加，但与相同密度条件下的欧姆加热放电相比，能量约束时间减少了约２０％。     

Boiling heat transfer characteristics of nanofluids in a flat heat pipe evaporator with micro-grooved heating surface

An experimental study was performed to understand the nucleate boiling heat transfer of water–CuO nanoparticles suspension (nanofluids) at different operating pressures and different nanoparticle mass concentrations. The experimental apparatus is a miniature flat heat pipe (MFHP) with micro-grooved heat transfer surface of its evaporator. The experimental results indicate that the operating pressure has great influence on the nucleate boiling characteristics in the MFHP evaporator. The heat transfer coefficient and the critical heat flux (CHF) of nanofluids increase greatly with decreasing pressure as compared with those of water. The heat transfer coefficient and the CHF of nanofluids can increase about 25% and 50%, respectively, at atmospheric pressure whereas about 100% and 150%, respectively, at the pressure of 7.4 kPa. Nanoparticle mass concentration also has significant influence on the boiling heat transfer and the CHF of nanofluids. The heat transfer coefficient and the CHF increase slowly with the increase of the nanoparticle mass concentration at low concentration conditions. However, when the nanoparticle mass concentration is over 1.0 wt%, the CHF enhancement is close to a constant number and the heat transfer coefficient deteriorates. There exists an optimum mass concentration for nanofluids which corresponds to the maximum heat transfer enhancement and this optimum mass concentration is 1.0 wt% at all test pressures. The experiment confirmed that the boiling heat transfer characteristics of the MFHP evaporator can evidently be strengthened by using water/CuO nanofluids.     

Talbot效应研究新进展

综述了对Ｔａｌｂｏｔ效应研究的进展，着重介绍了对它的新解释。     

半线性方程组边界层解的存在性

本文利用隐函数定理讨论了含小参数的半线性椭圆方程组边界层解的存在性．     

椭圆法用于阳极溶出伏安法测定微量银

用新物理量Ｖｏｐ的椭圆法对阳极溶出伏安法分析的含银离子浓度为１０＾５－１０＾－９ｍｏｌ／Ｌ的一系列溶液进行了研究。结果表明：光学方法与电化学方法所得分析结果相同；椭圆法可检测的浓度下限比电化学方法低一个数量级以上。而且测量的相对平均偏差也小于电化学方法。     

α—h—ANF及其类似物的固相合成及活性研究

由计算机辅助设计.以Fmoc-AA-Pfp为单体,用固相法合成了a-h-ANF及其两种类似物,产率较高.兔心血管收缩试验表明,两种类似物的血管舒张活性均高于a-h-ANF.     

新颖的二维超分子化合物[CoⅢ(aea)(2,2''''-bipy)]Cl·H2O的水热合成及结构表征

0IntroductionInrecentyearsgreatattentionhasbeenpaidtosupramolecularchemistryandawidevarietyofnet鄄workshavealreadybeenconstructedbasedupontheprincipleofcrystalengineering[1~3].Usually,variousmultifunctionalorganicligands,bothrigidandflexiblemulticarboxyli…     

氯化铯和氯化镧溶剂体系及四类新化合物的合成

研究了四元体系ＣｓＣｌ－ＬａＣｌ３－ＨＣｌ－Ｈ２Ｏ（２５℃、「ＨＣｌ」＝１３％（ｗｔ），２３％（ｗｔ）和ＣｓＣｌ－ＬａＣｌ３－ＨＡｃ－Ｈ２Ｏ（３０℃，「ＨＡｃ」＝４２％（ｗｔ））的平衡态的溶度数据，并给出制了相应的溶度图，共得到了ＣｓＣｌ．ＬａＣｌ３．４Ｈ２Ｏ、２ＣｓＣｌ．ＬａＣｌ３．２Ｈ２Ｏ和３ＣｓＣｌ．ＬａＣｌ３．３Ｈ２Ｏ３种化合物。对得到的新相进行了热分析，Ｘ射线粉末衍射及偏光性质的测定，依     

水热法合成Ce0.67Zr0.33O0.2固溶体研究

采用两种不同前驱体通过水热法合成了Ce0.67Zr0.33O0.2固溶体,并通过XRD,BET,TPR等手段考察了样品的相结构,比表面及还原特性.结果表明,在180℃,12 h的水热条件下,以共沉淀产物为前驱体所制得的Ce0.67Zr0.33O0.2固溶体比表面积较高,但存在一定程度的相分离;以凝胶产物为前驱体制得的Ce0.67Zr0.33O0.2固溶体结构更完整,具有良好的还原特性及热稳定性.