Total synthesis of (+)-4,5-deoxyneodolabelline

The first total synthesis of the marine dolabellane diterpene (+)-4,5-deoxyneodolabelline (1) has been accomplished. The highly efficient approach is characterized by the convergent assembly of dihydropyrans 2ab and cyclopentylsilanes 3ab. Allylic silane 3a was prepared from 2-methyl-2-cyclopentenone via a copper-catalyzed 1,4-addition followed by diastereoselective alkylation of the resulting enolate. A chemical resolution of racemic cyclopentanone 8 was effected by (S)-CBS-catalyzed borohydride reduction. Direct hydroxymethylation of the enantioenriched ketone 8 to form allylic alcohol 14 was achieved by a Stille palladium-catalyzed cross-coupling from the cyclopentenyl triflate 13. Treatment of the corresponding allylic phosphate 15 with trimethylsilylcopper reagent provided for displacement with allylic transposition yielding the exocyclic allylsilane 3a with excellent diastereoselectivity. Dihydropyrans 2a and 2b were prepared from optically pure acyclic acetals via ring-closing metathesis. Coupling of 3a and 2a or 2b via the carbon-Ferrier protocol gave trans-2,6-disubstituted dihydropyrans 30 and 35 with complete stereoselectivity. Vanadium-based pinacol coupling reactions were explored for closure of the medium-sized carbocycle to yield syn-diol 33. X-ray diffraction studies of the monobenzoate 34 have provided unambiguous stereochemical assignments. Substantial ring strain accounted for the lack of alkene products typical of reductive elimination using TiCl(3) and zinc-copper couple (McMurry) conditions leading to 37. Finally, the natural product 1 was obtained via Swern oxidation of the diol 37.     

Reaction of triphenylphosphine with phenylethanethiolate-protected Au38 nanoparticles

The replacement of phenylethanethiolate (SC2Ph) ligands on 1.1 nm (core diameter) Au38(SC2Ph)24 monolayer-protected clusters (MPCs) with varied amounts of triphenylphosphine (PPh3) is investigated in methylene chloride. UV-vis spectra suggest that changes in the MPC Au core size occur when large amounts (> 10 equiv moles per cluster) of PPh3 are reacted with Au38(SC2Ph)24. 1H and 31P NMR spectra following the addition of smaller amounts (< 5 equiv moles) of PPh3 indicate that the reaction liberates a AuISC2Ph complex, as opposed to a SC2Ph thiol, disulfide, or anion. A 1H NMR kinetic study shows that the exchange is surprisingly rapid, even faster than exchanges of thiolates with other thiolates, at room temperature and in air. The reaction is slowed when cooled or conducted under Ar. The difference in potentials of the initial one-electron voltammetric reduction and oxidation of Au38(SC2Ph)24 decreases slightly upon reaction with small amounts of PPh3.     

Metal-directed synthesis and photophysical studies of trinuclear v-shaped and pentanuclear x-shaped ruthenium and osmium metallorods and metallostars based upon 4'-(3,5-dihydroxyphenyl)-2,2':6',2''-terpyridine divergent units

A new series of V-shaped trinuclear metallorods and X-shaped pentanuclear metallostars has been prepared by the reaction of metal complexes bearing pendant phenolic functionalities with complexes containing electrophilic ligands. Specifically, {M(tpy)2} motifs (M=Ru or Os; tpy=2,2':6',2'-terpyridine) bearing one or two pendant 3,5-dihydroxyphenyl substituents at the 4-position of the central ring of the tpy have been reacted with the complexes [Ru(tpy)(Xtpy)]2+ (X=Cl or Br) to form new ether-linked species. The energy transfer from ruthenium to osmium in these complexes has been investigated in detail and the efficiency of transfer shown to be highly temperature dependent; the energy transfer is highly efficient at low temperature, whereas at room temperature nonradiative and nontransfer deactivation of the excited {Ru(tpy)2}* domains is most significant.     

Synthesis, structure, and dynamics of six-membered metallacoronands and metallodendrimers of iron and indium

In the reaction of the N-substituted diethanolamines (H(2)L(1-3)) (1-3) with calcium hydride followed by addition of iron(III) or indium(III) chloride, the iron wheels [Fe(6)Cl(6)(L(1))(6)] (4) and [Fe(6)Cl(6)(L(2))(6)] (6) or indium wheels [In(6)Cl(6)(L(1))(6)] (5), [In(6)Cl(6)(L(2))(6)] (8) and [In(6)Cl(6)(L(3))(6)] (9) were formed in excellent yields. Exchange of the chloride ions of 6 by thiocyanate ions afforded [Fe(6)(SCN)(6)(L(2))(6)] (7). Whereas the structures of 4, 5 and 7 were determined unequivocally by single-crystal X-ray analyses, complexes 8 and 9 were characterised by NMR spectroscopy. Contrary to what is normally presumed, the scaffolds of six-membered metallic wheels are not generally rigid, but rather undergo nondissociative topomerisation processes. This was shown by variable temperature (VT) (1)H NMR spectroscopy for the indium wheel [In(6)Cl(6)(L(1))(6)] (5) and is highlighted for the enantiotopomerisation of one indium centre [ 1/6[S(6)-5]<==>[1/6[S(6)-5']]. The self-assembly of metallic wheels, starting from diethanolamine dendrons, is an efficient strategy for the convergent synthesis of metallodendrimers.     

The use of static pressures of heavy gases within a quadrupole ion trap

The performance of quadrupole ion traps using argon or air as the buffer gas was evaluated and compared to the standard helium only operation. In all cases a pure buffer gas, not mixtures of gases, was investigated. Experiments were performed on a Bruker Esquire ion trap, a Finnigan LCQ, and a Finnigan ITMS for comparison. The heavier gases were found to have some advantages, particularly in the areas of sensitivity and collision-induced dissociation efficiency; however, there is a significant resolution loss due to dissociation and/or scattering of ions. Additionally, the heavier gases were found to affect ion activation and deactivation during MS/MS, influencing the product ion intensities observed. Finally, the specific quadrupole ion trap design and the ion ejection parameters were found to be crucial in the quality of the spectra obtained in the presence of heavy gases. Operation with static pressures of heavy gases can be beneficial under certain design and operating conditions of the quadrupole ion trap.     

Separation of rhodium from iridium with sodium borohydride and standardization of rhodium(III) solutions

Of the platinum group metal separations, that of rhodium from iridium is the most difficult. The existing gravimetric methods are too lengthy or make use of organic reagents which ultimately need to be removed before iridium can be determined. The proposed method of separation is rapid, needs no pH control, and easy to carry out. Rh(III) ions are quantitatively reduced to Rh(0) by the action of aqueous sodium borohydride. The separation is best achieved in perchlorate medium in the presence of hydroxylamine. The separation is dependent on the concentration ratio of iridium to rhodium; if this is high, some iridium is co-precipitated; if low, the rhodium obtained is free from even spectrographic traces of iridium. A new method for standardization of Rh(III) solutions with sodium borohydride is proposed.     

Diffusion NMR methods applied to xenon gas for materials study

We report initial NMR studies of (i) xenon gas diffusion in model heterogeneous porous media and (ii) continuous flow laser-polarized xenon gas. Both areas utilize the pulsed gradient spin-echo (PGSE) techniques in the gas phase, with the aim of obtaining more sophisticated information than just translational self-diffusion coefficients--a brief overview of this area is provided in the Introduction. The heterogeneous or multiple-length scale model porous media consisted of random packs of mixed glass beads of two different sizes. We focus on observing the approach of the time-dependent gas diffusion coefficient, D(t) (an indicator of mean squared displacement), to the long-time asymptote, with the aim of understanding the long-length scale structural information that may be derived from a heterogeneous porous system. We find that D(t) of imbibed xenon gas at short diffusion times is similar for the mixed bead pack and a pack of the smaller sized beads alone, hence reflecting the pore surface area to volume ratio of the smaller bead sample. The approach of D(t) to the long-time limit follows that of a pack of the larger sized beads alone, although the limiting D(t) for the mixed bead pack is lower, reflecting the lower porosity of the sample compared to that of a pack of mono-sized glass beads. The Pade approximation is used to interpolate D(t) data between the short- and long-time limits. Initial studies of continuous flow laser-polarized xenon gas demonstrate velocity-sensitive imaging of much higher flows than can generally be obtained with liquids (20-200 mm s-1). Gas velocity imaging is, however, found to be limited to a resolution of about 1 mm s-1 owing to the high diffusivity of gases compared with liquids. We also present the first gas-phase NMR scattering, or diffusive-diffraction, data, namely flow-enhanced structural features in the echo attenuation data from laser-polarized xenon flowing through a 2 mm glass bead pack.     

Discriminating the helical forms of peptides by NMR and molecular dynamics simulation

The HNCO NMR pulse sequence was applied to three selectively labeled (15)N and (13)C isotopic homologues of the peptide Ac-WAAAH(AAARA)(3)A-NH(2) to probe directly for hydrogen bonds between residues 8 and 11 (characteristic of a 3(10)-helix), 8 and 12 (alpha-helix), and 8 and 13 (pi-helix). The experiments demonstrate conclusively, and in agreement with circular dichroism studies, that the center of the peptide is alpha-helical; there is no discernible 3(10)- or pi-helix at these specific positions. Molecular dynamics simulations of the preceding peptide and Ac-(AAAAK)(3)A-NH(2) in water using the potential energy parameter set CHARMM22/CMAP correctly yield an alpha-helix, in contrast to simulations with the set CHARMM22, which result in a pi-helix.     

Engineering switches, genetically

Ostermeier, Guntas, and Mitchel describe a new approach to design enzymes that are allosterically regulated by an unrelated ligand . The resulting protein, constructed by nonhomologous recombination and genetic screens, displays switch-like behavior.