十二烷基甜菜碱与聚乙烯吡咯烷酮相互作用的研究

通过表面张力测定和13CNMR、ESR波谱研究了十二烷基甜菜碱（C12BE）与聚乙烯吡咯烷酮（PVP）的相互作用．表面张力测定表明,在pH＝6．5及NaCI存在下,C12BE与PVP之间有明显的相互作用,可形成C12BE／PVP复合物,且C12BE－PVP混合溶液的β－lgc曲线出现2个转折点,第一个转折点时C12BE浓度c1（C12BE－PVP开始缔合）低于C12BE的cmc值;而第二个转折点时C12BE浓度c2（C12BE－PVP缔合达饱和）大于cmc值．（c2─c1）与PVP浓度呈线性关系．PVP降低C12BE胶束化标准自由能（△G0）随PVP浓度增加而增大．13CNMR测定表明,PVP骨架上α-CH、β-CH2和吡咯环上与N相连的亚甲基吸附于C12BE胶束表面的碳氢链部位,屏蔽了C12BE胶束表面碳氢链与水的接触．ESR波谱表明,PVP－C12BE聚集体"界面"的粘度高于C12BE胶束"界面"的粘度．     

Synthesis and single-molecule studies of a well-defined biomimetic modular multidomain polymer using a peptidomimetic beta-sheet module

In the pursuit of advanced biomaterials with combined strength, toughness, and elasticity, a new class of well-defined modular polymers has been synthesized, and their nanomechanical properties have been studied using atomic force microscopy. These polymers are based on a peptidomimetic beta-sheet-based double-closed loop (DCL) module, which was designed to overcome the limitation of the modular polymers we reported previously (J. Am. Chem. Soc. 2004, 126, 2059). Single-molecule force-extension experiments revealed the sequential unfolding of these modules as the polymer is stretched, resulting in more regular sawtooth-patterned curves similar to those seen in titin and other biopolymers. The single-molecule data agreed well with computer modeling, which suggested that hydrogen bonding and pi-stacking are both involved in the formation of small DCL clusters along the polymer chain.     

有毒汤样中微量农药杀虫环的鉴定

报道了在广东江门市某工厂发生的食物中毒事件中，对致毒汤样品中农药的分析鉴定过程；采用GC－MS联用分析，被分离出的疑为致毒物质的成分在现有的质谱谱库中检索未能鉴定；通过采用综合分析，将可疑成分提取、分离、柱以谱纯化，结合NMR、ICP－AES和元素分析，确证了汤样中的致毒物质是沙蚕毒素类农药“杀虫环”。     

螺旋共轭分子2,2′-螺二茚-1,1′, 3,3′-四酮及其衍生物的二阶非线性光学性质与分子结构关系的研究

采用AM1和ZINDO系列方法研究了螺旋共轭分子2,2′-螺二茚-1,1′, 3,3′-四酮及其含氮衍生物的几何构型和各分子的稳定构型, 并以稳定构型为基础, 计算了这些分子的电子光谱、二阶非线性光学系数βμ, β0及电荷转移, 考察了取代基变化对βμ的影响. 计算结果表明, 所设计分子兼具较大的二阶非线性光学系数和较高的透过率, 有希望成为一类新型的二阶非线性光学材料.     

纳米银掺杂二氧化硅复合颗粒的制备及表征

0引言金属纳米颗粒因其粒子尺寸小(1￣100nm),比表面积大,表面原子数多,表面能和表面张力随粒径的下降急剧增大而具有量子尺寸效应[1]、小尺寸效应[2]、表面效应[3]及宏观量子隧道效应[4]等,从而出现了不同于常规固体的新奇特性,如:光学性质、磁性质以及电磁学性质[5],使其在催化、信息存储及非线性光学等领域展示了广阔的应用前景[6]。虽然制备金属纳米颗粒的方法有很多[6],但是由于纳米尺寸的金属颗粒具有较高的表面能,容易发生聚集,所以如何保持其稳定性依旧是比较困难的问题。随着纳米科技的发展,人们正尝试用各种方法来解决这个问题:如…     

废弃生物质在超临界水中转化制氢过程的研究

以废弃生物质转化为富氢气体为目的，使用间歇式超临界水反应器，在反应温度773 K～923 K、压力15.5 MPa～34.5 MPa停留时间1 min～30 min和Ca/C摩尔比0～0.56范围内，对木屑在超临界水条件下生成的气体组成及产率进行了考察。实验表明，Ca/C摩尔比和温度对木屑转化的影响较大。当Ca/C摩尔比为0.48时，碳的气体转化率和氢气产率提高了近一倍。温度从773 K提高到923 K，碳的气体转化率由47％提高到76％，氢气产率由4.5 mmol/g上升到6.9 mmol/g。与温度相比，停留时间和压力的影响不大。     

Disk morphology and disk-to-cylinder tunability of poly(acrylic acid)-b-poly(methyl acrylate)-b-polystyrene triblock copolymer solution-state assemblies

Disk and cylindrical micellar assemblies were formed through self-organization of poly(acrylic acid)-b-poly(methyl acrylate)-b-polystyrene (PAA-b-PMA-b-PS) amphiphilic triblock copolymers with organic diamines as counterions in water/ tetrahydrofuran (THF) solvent mixtures. The system was investigated by means of transmission electron microscopy and cryogenic transmission electron microscopy. It was found that the assembled-state morphologies could be modified by alteration of the type and concentration of cationic diamine counterion undergoing interaction with the negatively charged, polyelectrolyte PAA corona block, the relative amount of water in the water/THF mixture, and the hydrophobic block chain length. Multivalency of the organic amine counterion was critical for disk formation. It was further demonstrated that a single block copolymer underwent disc-to-cylindrical micellar transitions reversibly with variation in the relative water/THF ratio. The ability to form disks beginning from either THF-rich or water-rich solutions indicated that the disk morphology was thermodynamically stable and that THF was important in keeping the micellar structure from becoming kinetically frozen. The nanoassemblies were produced having low size dispersities and were stable for at least one month. Intermediate structures between disks and cylinders were also observed, indicating two distinct kinetic pathways between the two micelle structures.     

软光刻技术制备液晶显示用定向层

以偶氮聚合物光致表面起伏光栅为模板,制备聚二甲基硅氧烷(PDMS)弹性印章,再以可溶性聚酰亚胺(PI)为“墨水”,在石英玻璃上压印出具有规则起伏结构的PI薄膜.由此制备的PI薄膜显示出很好的使液晶分子定向排列的效果.此方法成本低、效率高,是一种实用的液晶定向层薄膜制备方法.     

聚合物 分散液晶体系的相分离结构对温度依赖性的研究

在不同温度下采用紫外光引发相分离法制备了聚合物分散液晶样品．用光学显微镜及扫描电镜研究了样品的相分离结构．采用对样品施加电压观察其微结构轮廓，或测量液晶微粒相变点的简单方法研究了聚合温度对相分离结果的影响．结果表明，在一定温度范围内，随着温度的增高，液晶微粒的平均尺寸趋于减小，而且形成的液晶微粒也逐渐变纯．作者给出了这些测试结果并进行了讨论．     

A Novel Method for Quantification of Circulating DNA in Serum by Capillary Zone Electrophoresis

In this paper, we first presented a novel method for quantification of circulating DNA in human serum based on capillary zone electrophoresis with laser-induced fluorescence detection (CZE-LIF). The serum was digested by proteinase to release free DNA, and then CZE-LIF system was used for the quantification of total circulating DNA. This method was successfully used to quantify the circulating DNA levels in sera from healthy individuals and certain cancer patients.We found the significantly elevated circulating DNA levels in certain prostate cancer patients. Our results demonstrated that CZE-LIF system has good linearity, excellent sensitivity (0.5 ng/mL DNA),satisfactory reproducibility (RSDs in one day and between days were both less than 5%) and reliability, and is well suitable to the quantification of the circulating DNA in human serum or plasma.