两个2,4-二羟基苯甲醛缩甘氨酸配合物的合成、结构及其对醇的选择性氧化催化

合成和表征了2个2,4-二羟基苯甲醛缩甘氨酸(H₃L)席夫碱配合物[Cu(Py)₂(HL)] (1)和[Zn(Py)₃(HL)]·2Py(Py=吡啶) (2),并通过X射线单晶衍射分析确定了其结构.配合物1通过分子间的O-H…O氢键形成了一维链状结构,配合物2通过分子间的O-H…O和C-H…O氢键形成了二维网状结构.重要的是,配合物1在醇的选择性氧化反应中显示出了良好的催化效率(转化率高达94.8%,选择性高达98.3%).     

具有磁效应的温敏性药物载体的制备及表征

在合成具备一定分子结构的聚(N-异丙基丙烯酰胺)-聚乳酸(PNIPAAm-PLA)嵌段共聚物的基础上,采用透析法制备了PNIPAAm-PLA共聚物磁性复合胶束和囊泡。本文发现不同的制备工艺条件会分别形成胶束和囊泡两种载体形态,并对两种载体的形貌进行了细致对比,发现两种结构特点的载体分别适合疏水性和亲水性药物的装载。对复合胶束的最低临界溶解温度(LCST)进行了表征研究,得到其LCST在38℃左右,略高于人体体温。对不同Fe4O3磁性粒子投料比对应制备的复合胶束的磁性能进行了较详细的测试,发现磁性粒子的加入量对其磁响应性影响不大。     

Derivatization following hollow‐fiber microextraction with tetramethylammonium acetate as a dual‐function reagent for the determination of benzoic acid and sorbic acid by GC

Derivatization at the injection port following hollow‐fiber‐based liquid–liquid–liquid microextraction with tetramethylammonium acetate as a dual‐function reagent, i.e. an acceptor and derivatization reagent, for the determination of benzoic acid (BA) and sorbic acid (SA) in real samples by GC was developed. BA and SA were extracted from aqueous samples to an organic phase impregnated into the pores of the hollow fiber wall, and then back‐extracted to the acceptor solution located inside the lumen of the hollow fiber. Upon injection, the extracted analytes were quantitatively derivatized to their methyl esters with tetramethylammonium acetate in the GC injection port. Several parameters related to the derivatization and extraction efficiency were optimized. The linearity was satisfactory over a concentration range of 0.1–50 mg/L with r > 0.993 for both analytes. The LODs were 2.0 μg/L for SA and 20 μg/L for BA. The recoveries (83–116%) and precisions (RSDs of 1.2–11.4% (n = 3)) were examined by analyzing real spiked samples. The enrichment factors of BA and SA were 300 and 425. The results demonstrated that this is a simple, rapid, accurate, and sensitive method for the determination of BA and SA in various samples.     

苯丙水溶胶的合成与性能研究(I) 聚合工艺和反应组分对聚合稳定性和胶体性能的影响

用一次投料法、半连续滴加法和单体预乳化法三种聚合工艺，合成了苯丙乳液聚合物，并加氨微细化，转化成水溶胶，考察了聚合工艺和反应组分（乳化剂，功能单体等）对苯丙乳液及其水溶胶反应稳定性和粒子大小及分布等胶体性能的影响。     

关于水蒸气蒸馏的建议

在水蒸气蒸馏基本操作训练中,一般采用澳苯、苯胺、苯甲醛或1一辛醇等药品。这几种药品或者有毒或者有难闻的气味,不仅损害师生的身体,而且 还会污染环境。     

金在铱内敏的直接正像乳剂中的作用

制备依内敏的AgBr立方体乳剂,乳剂被二氧化硫脲和三氯化金灰化。实验表明:有金存在时灰化乳剂,灰化中心优先在颗粒表面形成;金不存在时,则灰化中心优先在颗粒内部形成。用Na₁S₂O₃溶液刻蚀乳剂,得到了灰化中心在乳剂颗粒体相中的分布曲线。当二氧化硫脲量小,加金灰化时,灰化中心分布在颗粒表面和次表面;当二氧化硫脲量大,加金灰化时,灰化中心分布在颗粒体相中,但由表到里,灰化中心越来越少;当二氧化硫脲量大,不加金灰化时,灰化中心主要分布在颗粒中层部分。对加金灰化的乳剂来说,由于颗粒内部没有灰化中心竞争光生空穴,有大量的光生空穴破坏颗粒表面的灰化中心,因而可以获得高感直接正像乳剂。     

化学修饰电极富集石墨炉原子吸收法测定痕量金

本文提出用聚丙烯脒硫氰酸盐化学修饰石墨管内壁、电化学预富集石墨炉原予吸收测定Au的分析方法.分析灵敏度提高100倍.应用于矿石中痕量Au的测定,获得了满意的结果.     

二维M-Co3O4负载Ir对香草醛加氢脱氧性能研究

以二维金属-有机框架M-Co₃O₄为载体制备了具有高活性的Ir/M-Co₃O₄催化剂.采用X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)、电感耦合等离子体发射光谱仪(ICP-OES)、 N₂物理吸/脱附等方法对催化剂进行了表征,并研究了催化剂、温度、时间、溶剂等因素对香草醛加氢脱氧反应的影响.结果表明, Ir/M-Co₃O₄催化剂具有较好的普适性和稳定性,在香草醛加氢脱氧制备4-甲基愈创木酚(MMP)反应中表现出较高的活性和选择性,香草醛的转化率达100%, MMP的选择性不低于99%.     

Lithium Bis(oxalate)borate Additive for Self-repairing Zincophilic Solid Electrolyte Interphases towards Ultrahigh-rate and Ultra-stable Zinc Anodes

The artificial solid electrolyte interphase (SEI) plays a pivotal role in Zn anode stabilization but its long-term effectiveness at high rates is still challenged. Herein, to achieve superior long-life and high-rate Zn anode, an exquisite electrolyte additive, lithium bis(oxalate)borate (LiBOB), is proposed to in situ derive a highly Zn²⁺-conductive SEI and to dynamically patrol its cycling-initiated defects. Profiting from the as-constructed real-time, automatic SEI repairing mechanism, the Zn anode can be cycled with distinct reversibility over 1800 h at an ultrahigh current density of 50 mA cm⁻², presenting a record-high cumulative capacity up to 45 Ah cm⁻². The superiority of the formulated electrolyte is further demonstrated in the Zn||MnO₂ and Zn||NaV₃O₈ full batteries, even when tested under harsh conditions (limited Zn supply (N/P≈3), 2500 cycles). This work brings inspiration for developing fast-charging Zn batteries toward grid-scale storage of renewable energy sources.     

IM-5分子筛在Ni-Cu催化剂甲烷热裂解制氢反应中的作用研究

甲烷热裂解制氢并生成高附加值的纳米碳材料,被认为是极具发展前景的氢气生产途径,但高性能催化剂的研发仍存在诸多挑战.我们选择多种载体(TS-1、 IM-5、 Y、介孔SiO₂、 γ-Al₂O₃、 CNTs),采用浸渍法制备Ni-Cu负载催化剂,通过低温N2吸附-脱附、 XRD、 SEM和H₂-TPR等系列表征方法对样品进行分析,考察不同载体对催化剂甲烷裂解制氢和纳米碳材料的影响.实验结果发现,分子筛载体独特的孔道结构有利于金属颗粒的分散,能有效避免反应中界面效应导致的催化剂失活,可提高催化剂反应活性并延长反应寿命,也显著提高了其碳产率.其中以IM-5分子筛为载体的催化剂表现最佳,在反应温度为700℃时, NiCu/IM-5催化剂甲烷转化率高达80%,氢气选择性达100%,反应400 min后活性未见明显降低. NiCu/IM-5催化剂碳产率高达1 446 g_C/g_cat,是NiCu/SiO₂催化剂的5.7倍, NiCu/γ-Al