ZSM-5催化丙烯芳构化反应构效关系及反应特性

甲醇两步制芳烃反应中低碳烯烃芳构化反应稳定性优异,为分析其内在机制,制备了不同硅铝比(n_SiO2/n_Al2O3)及Zn负载量的ZSM-5催化剂,以丙烯芳构化为模型反应,分析ZSM-5表面酸性对低碳烯烃芳构化反应性能的影响规律,并探究反应微观特性。发现当硅铝比由150降至75时,增加的酸密度促进了烯烃氢转移芳构化过程,使芳烃选择性由31.0%增至34.4%,但丙烯直接参与的氢转移过程也被强化,使丙烷产物选择性由28.2%增至36.0%。引入Zn助剂可将部分Br?nsted酸转变为ZnLewis酸,强化烯烃脱氢芳构化过程,使芳烃选择性进一步显著增加到62.4%。丙烯芳构化过程中芳烃烷基化深度比甲醇芳构化过程低,提升总芳烃选择性的同时,也明显抑制了难溶性积碳的形成,使反应稳定性明显提升。由此得出,甲醇两步制芳烃过程中甲醇制低碳烯烃过程对甲醇的预先消耗,抑制了低碳烯烃芳构化反应芳烃产物的深度烷基化,是该反应表现出优异稳定性的重要原因。     

高分子聚合物/有机物复合型高温缓凝剂的构建及其性能研究

通过水溶液聚合法合成高分子聚合物缓凝剂PID-1,采用红外光谱、热重分析及扫描电镜分析了PID-1的化学结构、热稳定性及微观结构,并基于低场核磁工作分析测试技术及扫描电镜等对其缓凝性能进行了分析。辅以具有缓凝性能的有机物PN构建高分子聚合物/有机物复合型高温缓凝剂PID-2,就其缓凝作用、稠化性能、温度及加量敏感性等进行了探讨,并结合孔隙度演变、水化产物类型及含量揭示了复合型高温缓凝剂PID-2影响水泥浆体系早期抗压强度发育的内在机理。      

含二茂铁基荧光探针对H2S的识别

以乙酰二茂铁和蒽醛为原料,合成了一种新的反应型荧光探针1-二茂铁基-3-(9-蒽基)丙烯酮,经1H NM R,13C NM R,IR,LC-M S等手段表征确证。基于Michael加成引起的电子转移机制,利用硫化氢的强亲核性,以荧光滴定法考察了该化合物在生理条件下对硫化氢的识别作用,得出其最佳识别时间为50 min,最佳识别浓度为50μmol/L,且多数离子不会对其识别作用产生干扰。这种能稳定检测的,具有高选择性、高灵敏度的反应型荧光探针化合物,可用于生物医药领域。     

钙钛矿光伏电池封装材料与工艺研究进展

钙钛矿太阳能电池作为第3代新概念太阳能电池,具有高光电转换效率、低成本和可柔性加工等优点,近年来发展迅速,其光电转换效率从一开始的3.8%增长到近期的25.5%,逐渐比肩硅电池,已接近商业化应用水平。目前,实现钙钛矿太阳能电池产业应用的关键环节在于电池封装,它不仅可以解决钙钛矿光伏器件稳定性问题,还可以实现电池安全、环保和延长使用寿命等要求。结合近十几年来钙钛矿光伏电池封装材料和封装工艺两方面的发展现状,文中介绍了钙钛矿电池封装领域取得的成果和存在的不足,讨论了目前现有封装技术的优缺点,以及它们适用的不同器件类型。着重在不同温度湿度条件下,比较了不同封装材料性能、封装工艺条件对钙钛矿电池效率及稳定性的影响,归纳出影响钙钛矿电池薄膜封装效果的3个关键因素： 聚合物的弹性模量、水蒸气透过率、加工温度。比较了不同聚合物薄膜封装材料适宜的加工温度、优缺点及加工成本。可以看出,随着钙钛矿光伏电池工业化需求的强烈增长和人们对其封装材料研究的不断深入,研究适合大面积生产和光伏建筑一体化的新型功能聚合物封装材料将是必然趋势。     

Preparation and Properties of Poly（ether ether ketone）/Carbon Nanotube Modified Polypropylene Janus Composite Separator北大核心CSCD

Lithium-ion batteries （LIBs）have attracted wide attention because of their broad prospects in electric vehicles. However,the safety problems and low multiplier performance of the commercial polyolefin separator limit their further development,due to the poor dimensional thermal stability and low electrolyte absorption rate. Poly（ether ether ketone）（PEEK）and carbon nanotube（CNT）are compounded to coat on polypropylene （PP） to prepare Janus composite separator （PP@C） through the phase inversion method. PP@C composite separator does not deform at 180 ℃ for 0. 5 h（only slight deformation）,illustrating excellent thermal stability. The electrolyte absorption rate of PP@C2 is 193. 8%. The electrolyte uptake rate of the PP@C2 composite membrane was 193. 8%,which was 64. 5% higher than the PP membrane,showing a superduper electrolyte permeability. As a result,the specific discharge capacity of LIBs assembled with PP@C2 composite separator is 157. 6 mA·h/g at 0. 2 C and 129. 8 mA·h/g at 2 C,showing good rate performance with the capacity recovery rate of more than 99%. This might be attributed to the ultra-high thermal stability of PEEK,the good affinity of the electrolyte,the high conductivity of CNT,as well as the uniform dispersion of Li+ ,so that the separator can have excellent electrochemical performance while improving safety. © 2022, Science Press (China). All rights reserved.     

Zeolitic imidazolate framework-8 as a dispersive solid phase extraction sorbent for simultaneous determination of 145 pesticide residues in polyphenol-rich plants

Many plants have a high polyphenol content, which causes the matrix effect and makes the analysis of trace pesticide residues highly challenging. A common approach to improving matrix effects is to purify pesticides through the use of sorbents, but this requires a combination of multiple sorbents and extensive use. Zeolitic imidazolate framework-8 is widely used for pesticide analysis due to its high porosity, large specific surface area, and versatility. Here, we established and validated a modified quick, easy, cheap, effective, rugged, and safe method based on a zeolitic imidazolate framework-8 that was used to test the removal ability for polyphenols. To this end, 145 pesticide residues in peppermint, perilla, fennel, and mulberry leaves were analyzed by the modified method coupled with liquid chromatography with tandem mass spectrometry. The mean recoveries of all pesticide residues were in the range of 74.3–103.7%, with mean relative standard deviations ≤9.1% at spiked concentrations of 1, 10, 50, and 100 μg/kg for mulberry leaves. The limits of quantitation of the method ranged from 1 to 50 μg/kg. This study offers a reliable approach for the accurate quantitative analysis of various trace substances in the polyphenol-rich plants.     

固相萃取净化/超高效液相色谱-串联质谱法测定养殖环境中地西泮及其代谢物

建立了固相萃取净化/超高效液相色谱-串联质谱(SPE/UPLC-MS/MS)同时测定养殖水和沉积物样品中地西泮及其3种代谢物的分析方法。水样经0.45μm玻璃纤维膜过滤,沉积物采用1%氨水-乙酸乙酯提取后,均通过混合型阳离子交换固相萃取(MCX SPE)柱富集净化。目标物用5%氨水-乙腈溶液洗脱后吹干,1 mL 40%乙腈水溶液溶解残渣,UPLC-MS/MS测定。经Phenomenex Kinetex C₁₈(100 mm×2.1 mm,1.7μm)色谱柱分离,乙腈和0.1%甲酸水溶液为流动相进行梯度洗脱。采用电喷雾正离子电离,多反应监测(MRM)模式下测定,内标法定量。4种目标物在0.1～100μg/L范围内的线性关系良好,相关系数(r²)大于0.999。水体和沉积物中的方法检出限分别为1.0～2.0 ng/L和0.02～0.05μg/kg,定量下限分别为2.0～5.0 ng/L和0.05～0.1μg/kg;平均加标回收率为90.2%～115%,相对标准偏差(RSD,n=6)为2.1%～9.6%。该方法灵敏度高,实用性强,可满足养殖环境中地...     

二维M-Co3O4负载Ir对香草醛加氢脱氧性能研究

以二维金属-有机框架M-Co₃O₄为载体制备了具有高活性的Ir/M-Co₃O₄催化剂.采用X射线粉末衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)、电感耦合等离子体发射光谱仪(ICP-OES)、 N₂物理吸/脱附等方法对催化剂进行了表征,并研究了催化剂、温度、时间、溶剂等因素对香草醛加氢脱氧反应的影响.结果表明, Ir/M-Co₃O₄催化剂具有较好的普适性和稳定性,在香草醛加氢脱氧制备4-甲基愈创木酚(MMP)反应中表现出较高的活性和选择性,香草醛的转化率达100%, MMP的选择性不低于99%.     

Simultaneous determination of chlorpyrifos and 3,5,6-trichloro-2-pyridinol in duck muscle by modified QuEChERS coupled to gas chromatography tandem mass spectrometry (GC-MS/MS)

A rapid, specific, and sensitive method based on modified quick, easy, cheap, effective, rugged, and safe (QuEChERS) coupled to gas chromatography tandem mass spectrometry (GC-MS/MS) was developed and validated for simultaneous determination of chlorpyrifos (CP) and its metabolite 3,5,6-trichloro-2-pyridinol (TCP) in duck muscle. The residues of CP and TCP were extracted by acidified acetonitrile. The fat layer of the extract was removed under ?20 °C, then the organic layer was evaporated. The analytes were derivatized by N-(tert-butyldimethylsilyl)-N-methyltrifluoroacetamide (MTBSTFA) and cleaned up by a mixture of 150 mg MgSO₄, 25 mg graphitized carbon black (GCB), and 50 mg N-propylethylenediamine (PSA) to remove interference. The final extract was analyzed by GC-MS/MS. Recovery values at the spiking concentrations ranged from 86.2 to 92.3 % for CP and from 74.8 to 81.8 % for TCP, with relative standard deviations (RSDs) lower than 9.5 and 12.3, respectively. The correlation coefficients of CP (from 2 to 2,000 μg/kg) and TCP (from 1 to 1,000 μg/kg) were equal to or higher than 0.998. The limits of detection (LODs) were 0.3 and 0.15 μg/kg, and the limits of quantification (LOQs) were 1.0 and 0.5 μg/kg for CP and TCP in duck muscle, respectively. The average intra- and inter-day accuracy ranged from 84.6 to 91.2 % for CP and 75.6 to 82.3 % for TCP, and the intra- and inter-day precisions were from 5.8 to 8.2 % for CP and 6.5 to 11.9 % for TCP. Furthermore, the CP and TCP residues in duck muscle samples were detected for dietary risk assessment using the validated method.

以四氟对苯二甲酸为配体构建的两个铅的配位聚合物：合成、晶体结构和荧光性质

在4-甲基咪唑/三氮唑存在下,利用四氟对苯二甲酸为配体、与Pb(NO3)2作用,得到了2种配位聚合物{[Pb(tfbdc)(H2tfbdc)0.5]·(4-MI)·(H2O)}n(1)和{[Pb(tfbdc)(H2O)2]}n(2)(H2tfbdc=四氟对苯二甲酸,4-MI=4-甲基咪唑),并用红外光谱、元素分析和X-单晶衍射对其进行了表征。化合物1属于单斜晶系,空间群为P21/n,化合物2属于三斜晶系,空间群为P1。配合物1中,铅离子依靠正常的Pb-O键和次级键Pb…O,与7个氧原子配位;tfbdc2-阴离子和H2tfbdc分别采用不同的配位方式桥联铅离子,导致1个具有孔道的三维结构的形成。而4-甲基咪唑和游离水分子通过氢键作用嵌在这三维结构的孔道中。π-π堆积作用的存在增强了1的稳定性。配合物2中,铅离子是位于8个氧原子的配位环境中,tfbdc2-阴离子以螯合和桥联的方式与铅离子作用,导致1个二维层状结构的形成。此外还考察了1和2的热稳定性和固体荧光性质。