Binary mixtures based on polycaprolactone and cellulose derivatives

Pyrolytic process has a promising potential for the environmentally friendly upgrading of lignocellulosic and plastic waste. Thermogravimetry and pyrolysis-gas chromatography-mass spectrometry (Py-GC/MS) were used to get information about the reactive decomposition of PCL in binary mixtures with microcrystalline cellulose (MC) or sisal fibres (SF). Preliminary thermogravimetric investigation showed that biomass is thermally degraded at lower temperatures than PCL and this process has a predominant influence on the thermal behaviour of the mixtures. Discrepancies between the experimental and predicted TG/DTG profiles were considered as a measurement of the extent of interactions occurring on co-pyrolysis. It was found that reactivity of PCL was slightly increased in PCL-SF binary mixtures. Evolution of acidic products from cellulose and hemicelluloses decomposition may promote PCL degradation in binary mixtures with SF. It seems that the co-pyrolysis process could have potential for the environmentally friendly transformation of biocomposites.     

四氟乙烯-乙烯溶液沉淀聚合

本文编制了一个简易计算机程序,测定了氟氯烷溶液沉淀聚合体系中四氟乙烯-乙烯共聚竞聚率:40℃:γC_2H_4=0.156±0.001,γC_2F_4=0.022±0.01670℃:γC_2H_4=0.197±0.001,γC_2F_4=0.055±0.020在此聚合体系中,聚合温度和共聚物组成比对链的规整性都有明显影响。当乙烯在45～55mol%范围内时,共聚物的IR随组成比而变化,利用此规律可简便地测定共聚物的组成比。     

动力学分光光度法测定微量草酸的研究

本文详细讨论了草酸对锡－苯基荧光酮－溴化十六烷基三甲基铵三元络合物显色反应的催化动力学条件，建立了动力学光度法测定微量草酸的新方法，本法Ｓａｎｄｅｌｌ灵敏度为７．４ｎｇ／ｃｍ＾２，草酸浓度在０－１．０μｇ／ｍＬ范围有良好线性关系，方法可直接用于菠菜中草酸含量的测定。     

Studies on the refolding of the reduced-denatured insulin with size exclusion chromatography

The refolding of the reduced-denatured insulin from bovine pancreas was investigated with the size exclusion chromatography (SEC). It was shown that the reduced-denatured insulin originally denatured with 7.0 mol L^?1 guanidine hydrochloride (GuHCI) or 8.0 mol L^?1 urea could not be refolded with a non-oxidized mobile phase. Although the oxidized and reduced glutathione (GSSG and GSH) were employed in the oxidized mobile phase, the reduced-denatured insulin still could not be renatured. However, in the presence of 2.0 mol L^t-1 urea in the oxidized mobile phase employed, the reduced-denatured insulin can be refolded with SEC, and the aggregation of denatured insulin can be diminished by urea. In addition, the disulfide exchange of reduced-denatured insulin also can be accelerated with GSSG/GSH in the oxidized mobile phase. The three disulfide bridges of insulin were formed correctly and the reduced-unfolded insulin can be renatured completely. The results were further tested with reversed-phase liquid chromatography (RPLC) and hydrophobic interaction chromatography (HIC).     

Competitive adsorption and desorption of a bi-solute mixture: effect of activated carbon type

This study aims to clarify the effects of carbon activation type and physical form on the extent of adsorption capacity and desorption capacity of a bi-solute mixture of phenol and 2-chlorophenol (2-CP). For this purpose, two different PACs; thermally activated Norit SA4 and chemically activated Norit CA1, and their granular countertypes with similar physical characteristics, thermally activated Norit PKDA and chemically activated Norit CAgran, were used. The thermally activated carbons were better adsorbers for phenol and 2-CP compared with chemically activated carbons, but adsorption was more reversible in the latter case. 2-CP was adsorbed preferentially by each type of activated carbon, but adsorption of phenol was strongly suppressed in the presence of 2-CP. The simplified ideal adsorbed solution (SIAS) model underestimated the 2-CP loadings and overestimated the phenol loadings. However, the improved and modified forms of the SIAS model could better predict the competitive adsorption. The type of carbon activation was decisive in the application of these models. For each activated carbon type, phenol was desorbed more readily in the bi-solute case, but desorption of 2-CP was less compared with single-solute. This was attributed to higher energies of 2-CP adsorption.     

相转移催化合成增塑剂BBP和水杨醛的研究

相转移催化合成增塑剂ＢＢＰ和水杨醛的研究郭锡坤，高文华，曾东宇（汕头大学化学系，汕头５１５０６３）关键词相转移催化，季铵盐，聚乙二醇，邻苯二甲酸丁苄酯，水杨醛，增塑剂邻苯二甲酸丁苄酯（增塑剂ＢＢＰ）是一种优良的增塑剂．邻羟基苯甲醛（水杨醛）不仅是重要...     

Density functional theory study of the mechanism of the proline-catalyzed intermolecular aldol reaction

Transition structures associated with the C-C bond-formation step of the proline-catalyzed intermolecular aldol reaction between acetone and isobutyraldehyde have been studies using density functional theory methods at the B3LYP/6-31G** computational level. A continuum model has been selected to represent solvent effects. For this step, which is the stereocontrolling and rate-determining step, four reactive channels corresponding to the syn and anti arrangement of the active methylene of the enamine relative to the carboxylic acid group of l-proline and the re and si attack modes to both faces of the aldehyde carbonyl group have been analyzed. The B3LYP/6-31G** energies are in good agreement with experiment, allowing us to explain the origin of the catalysis and stereoselectivity for these proline-catalyzed aldol reactions. Received: 2 April 2002 / Accepted: 18 July 2002 / Published online: 11 October 2002 Acknowledgements. This work was supported by research funds provided by the Ministerio de Educación y Cultura of the Spanish Government by DGICYT (project PB98–1429). All the calculations were performed on a Cray–Silicon Graphics Origin 2000 of the Servicio de Informática de la Universidad de Valencia. We are most indebted to this center for providing us with computer capabilities. Correspondence to: L. R. Domingo e-mail: domingo@utopia.uv.es     

Microstructure and electrical properties of BaTiO<Subscript>3</Subscript> and (Ba,Sr)TiO<Subscript>3</Subscript> ferroelectric thin films on nickel electrodes

Nickel thin films have been sputtered on standard Si/SiO₂ substrates with TiO₂ as an adhesive layer. The thermal stability of these substrates was analyzed. SEM images show an increase in grain size with annealing temperature. They were found to be stable till 800°C, beyond which the nickel layer disintegrated. These substrates were used for deposition of BaTiO₃ and (Ba,Sr)TiO₃ dielectric thin films under a reducing atmosphere. The dielectric thin films were processed with various pyrolysis and annealing temperatures in order to optimize the dielectric properties. Increased pyrolysis temperatures showed an increase in the grain size. Results on these nickelised substrates were finally compared with dielectric films deposited on platinized silicon substrates under identical conditions but crystallized in an oxygen atmosphere.     

电化学合成聚苯胺粉末电极的电化学行为研究

我们曾用慢速动电位扫描法研究化学合成聚苯胺粉末的电化学行为.本文对恒电位电解合成聚苯胺粉末进行了研究.用这种方法制备的粉末由于合成溶液中不含氧化剂因而纯度高.本文还报导了这种聚苯胺粉末电极的交流阻抗测量结果.交流阻抗法曾用于聚苯胺膜的电导和化学合成聚吡咯的电阻测定. 所用盐酸、氟硼酸、硅氟酸、苯胺均为分析纯;苯胺经常压蒸馏提纯;硫酸为超纯;磷酸为分析纯;高氯酸为优级纯.溶液皆用两次蒸馏水配制.     

Fabrication of lead titanate single crystalline nanowires by hydrothermal method and their characterization

Single crystalline nanowires of lead titanate (PbTiO₃) were fabricated by hydrothermal method at 200°C using lead acetate and n-tetrabutyl titanate as starting materials, where sodium hydroxide was served as a mineralizer. Crystalline phases, microstructure and optical properties of PbTiO₃ nanowires were investigated. The PbTiO₃ nanowires were uniform and continuous along the long axis, and were composed of single crystalline PbTiO₃ with a tetragonal perovskite structure. The diameter of a single nanowire was around 12 nm and the length reached up to 3 μm. The chemical composition of the samples and the valence states of elements were determined by X-ray photoelectron spectroscopy (XPS). The ultraviolet/visible absorption spectroscopic investigation suggested that the absorption edge of optical transition of the first excitonic state occurred at around 320 nm. A blue-green light emission peaking at about 471 nm (2.63 eV) is observed at room temperature, and the intensity of this emission increased with increasing excitation wavelength. Oxygen vacancies are responsible for the light emission of PbTiO₃ nanowires.