Atomic radical—molecule reactions F + CH<Subscript>3</Subscript>C≡CH: mechanistic study

The reaction of atomic radical F with propyne has been studied theoretically using ab initio quantum chemistry methods and transition state theory. The potential energy surface was calculated at the CCSD(T)/aug-cc-pVDZ (single-point) level using the UMP2/6-311++G(d,p) optimized structures. Two reaction mechanisms including the addition–isomerization–elimination reaction mechanism and the directed hydrogen abstraction reaction mechanism are considered. For the hydrogen abstraction reactions, i.e., the most probable evolution pathway in the title reaction, the HF formation occurs via direct abstraction mechanism dominantly and the H atom picked up by the atomic radical F should come mostly from the methyl group of normal propyne. On the other hand, for the addition–isomerization–elimination mechanism, the most feasible pathway should be the atomic radical F attacking on the C≡C triple bond in propyne (CH₃C≡CH) to form a weakly-bound adduct A1 with no barrier, followed by F addition to the C≡C triple bond to form the low-lying intermediate isomer 5. Subsequently, isomer 5 directly dissociates to P3 H₂CCCHF + H via transition state TS₅/P3. The other reaction pathways on the doublet PES are less competitive due to thermodynamical or kinetic factors. Furthermore, based on the analysis of the kinetics of all channels through which the addition and abstraction reaction proceed, we expect that the competitive power of reaction channels may vary with experimental conditions for the title reaction. The present work will provide useful information for understanding the processes of atomic radical F reaction with other unsaturated hydrocarbons. This material is available from author via E-mail.     

Selective determination of uric acid in the presence of ascorbic acid using a penicillamine self-assembled gold electrode

The electrochemical behaviors of uric acid (UA) at the penicillamine (Pen) self-assembled monolayers modified gold electrode (Pen/Au) have been studied. The Pen/Au electrode is demonstrated to promote the electrochemical response of UA by cyclic voltammetry (CV). The diffusion coefficient D of UA is 6.97 × 10⁻⁶ cm² s⁻¹. In differential pulse voltammetric (DPV) measurements, the Pen/Au electrode can separate the UA and ascorbic acid (AA) oxidation potentials by about 120 mV and can be used for the selective determination of UA in the presence of AA. The detection limit was 1 × 10⁻⁶ mol L⁻¹. The modified electrode shows excellent sensitivity, good selectivity and antifouling properties.     

Synthesis and characterization of three tetranuclear clusters containing a [Mo3OS3Sn]6+ cubane-like core

Three heterometallic cubane-like clusters, [Mo3(mu 3-O)(mu 3-S)3(SnCl3)(dtp)3(py)3] (dtp = S2P(OC2H5)2-, py = C5H5N) (1), (PPN)[Mo3(mu 3-O)(mu 3-S)3(SnCl3)(dtp)3(mu-OAc)(py)] (OAc = CH3COO-, PPN = (C6H5)3PNP(C6H5)3+) (2), and (Et4N)[Mo3(mu 3-O)(mu 3-S)3(SnCl3)(dtp)2(mu-OAc)2(py)] (3) have been prepared by the reaction of [Mo3(mu 3-O)-(mu-S)3(dtp)4(H2O)] (4), [Mo3(mu 3-O)(mu-S)3(dtp)3(OAc) (py)] (5), and [Mo3(mu 3-O)(mu-S)3(dtp)2(OAc)2 (py)] (6) with SnCl2, respectively. They have been characterized by IR, UV-vis, 31P NMR, 95Mo NMR, and X-ray structure analysis. All of these heterometallic clusters have a [Mo3OS3Sn]6+ core but contain a different arrangement of peripheral ligands. As far as the neutral cluster 1 is concerned, there is no bridging OAc ligand, while only one bridging OAc ligand is observed for cluster 2 and two are for cluster 3. The Mo-Mo distances are about 0.03-0.04 A shorter than those of the starting trimolybdenum clusters. This indicates that the incorporation of SnCl3- fragment into (Mo3) clusters makes the Mo-Mo bonding enhanced. Crystal data for 1: triclinic, space group P-1, a = 10.7423(2) A, b = 14.0357(1) A, c = 16.9346(2) A, alpha = 84.054(1) degrees, beta = 87.095(1) degrees, gamma = 84.517(1) degrees, V = 2525.82(6) A3, Z = 2, R = 0.038 for 5584 reflections (I > 2.0 sigma(I)). Crystal data for 2: triclinic, space group P-1, a = 12.9529(1) A, b = 15.6324(2) A, c = 19.6355(1) A, alpha = 92.083(1) degrees, beta = 97.908(1) degrees, gamma = 110.337(1) degrees, V = 3677.41(6) A3, Z = 2, R = 0.034 for 8665 reflections (I > 2.0 sigma(I)). Crystal data for 3: monoclinic, space group P2(1)/n, a = 14.0852(5) A, b = 15.1324(5) A, c = 23.2691(7) A, beta = 97.371(1) degrees, V = 4918.7(3) A3, Z = 4, R = 0.049 for 4970 reflections (I > 2.0 sigma(I)).     

Novel dual inhibitors against FP-2 and PfDHFR as potential antimalarial agents: Design,synthesis and biological evaluation

A series of novel 2,4-diaminopyrimidine-modified compounds was designed and synthesized. Compound 14 showed micromolar dual inhibitory effect on both FP-2 and PfDHFR, and potential inhibition to the proliferation of P. falciparum 3D7 strain and chloroquine-resistant P. falciparum Dd2 strain.     

Ultrafine molybdenum carbide nanoparticles supported on nitrogen doped carbon nanosheets for hydrogen evolution reaction

Nitrogen doped carbon nanosheets supported molybdenum carbides nanoparticles (Mo_xC/NCS) have been synthesized by tuning the mass ratio of melamine and ammonia molybdate. The Mo₂C/NCS-10 exhibits superior electrocatalytic performance and stability for HER, which was attributed to N-doped carbon nanosheets, small particle size, mesoporous structure, and large electrochemical active surface area.     

Simultaneous extraction of organotin, organolead and organomercury species from soils and litter

Extracting organotin compounds (OTC) from soils is difficult due to the high cation exchange and complexation capacity of soils, and little information about OTC in soils is available. In this study, a new extraction method, combining 1 M CaCl₂, 0.1% tropolone, and glacial acetic acid was developed. Recoveries of mono-substituted OTC from spiked plant litter, and soil samples were improved substantially to 40% compared to classical glacial acetic acid extraction commonly used in sedimentology, yielding <10% recovery in C-rich soil samples. Simultaneously, the recovery of other OTC, trimethyllead and monomethylmercury was satisfactory. The recoveries of most species from the spiked litter, upland and wetland soils exceeded 70%. The new method extracted much more organometallics from unspiked organic soils and litter than microwave- and ultrasound-assisted extraction and accelerated solvent extraction, most likely due to exchange of organometallics from the solid phase by Ca²⁺. The method is simple, highly efficient and with low contamination. Together with GC-ICP-mass spectrometry, the method allows the detection of these organometallics in the pg g⁻¹ range and it is particularly suitable for soil and plant materials with low organometallics contents.     

A highly enantioselective hetero-Diels-Alder reaction of aldehydes with Danishefsky's diene catalyzed by chiral titanium(IV) 5,5',6,6',7,7',8,8'-octahydro-1,1'-bi-2-naphthol complexes

The catalytic effect of chiral Lewis acids on the hetero-Diels-Alder reaction between aldehydes and Danishefsky's diene (1) has been investigated. A variety of combinations of different ligands and Lewis acids have been examined as catalysts for the hetero-Diels-Alder reaction between benzaldehyde and 1, and it has been found that the readily accessible Ti(IV)-H(8)-BINOL (TiHBOL) complex is a very effective catalyst for the reaction, leading to products with very high enantioselectivity (up to 99% ee) and yield (92%). The hetero-Diels-Alder reaction of other aldehydes with 1 under the catalysis of TiHBOL is a general reaction which proceeds well with very high enantioselectivity and isolated yield for various aldehydes at 0 degrees C to room temperature. Based on the experimental results, the proposed mechanism of the hetero-Diels-Alder reaction and the dihedral angle effects of ligands are discussed.     

Flow constant-current stripping analysis for antimony(III) and antimony(V) with gold fibre working electrodes : Application to Natural Waters

Antimony(III) is determined by means of electrolysis at ?0.40 V vs. Ag/AgCl on a gold-coated gold fibre electrode for 0.5–10 min in a redox buffer containing 0.01 M iron(II) in 0.10 M hydrochloric acid, and subsequent stripping with a constant current of 0.50μA either in 2 M hydrochloric acid or in 4 M hydrochloric acid/4 M calcium chloride. Antimony(V) is determined by the same procedure in 4 M hydrochloric acid medium. Bismuth(III) is masked by the addition of iodide to the sample prior to electrolysis. Antimony(III) and antimony(V) are determined by standard addition methods; the whole procedure including digital and graphical evaluation of the results is fully automated. The antimony(V) concentrations in the river water reference sample SLRS-1 and the seawater reference sample NASS-1 were found to be 0.63 and 0.31 μg l^?1 with standard deviations of 0.046 and 0.051 μg l^?1, respectively (n=15). The certified value for SLRS- 1 is 0.63±0.05 μg l^?1; no certified value is available for NASS-1.     

Determination of tin in canned foods by UV/visible spectrophotometric technique using mixed surfactants

The complex of tin(IV) with bromopyrogallol red (BPR) in the presence of nonyl phenoxy polyethoxyethanol (OP) and cetyltrimethylammonium bromide (CTAB) has a sensitive absorption peak at 304 nm. Under the optimal conditions, Beer's law is obeyed over the range 0.1-2.5 mug ml(-1) Sn(IV) with molar absorptivity being 8.2 x 10(4) l mol(-1) cm(-1) and detection limit 0.018 mug ml(-1). As compared with the visible method which also uses BPR as chromogenic reagent (lambda(max) = 550 nm), our method is sensitive and selective because of the complex's high, sharp absorption peak. In addition, the present method is simple and rapid, no heating or standing is needed. By means of the mixed surfactants the precipitation caused by the ion association of cetyltrimethylammonium cation and I(-)(3) anion is avoided if iodide is used for separating micro amounts of tin(IV) from a sample matrix. An application of the proposed method to the determination of Sn(IV) in a canned food was made with satisfactory results.     

Metal-betaine interactions—X. Preparation and crystal structures of bis(triethyl betaine)bis(nitrato)disilver(I) and catena-bis(triethyl betaine)disilver(I) diperchlorate

Two silver(I) complexes of triethyl betaine (Et₃N⁺CH₂COO⁻, Et₃BET) have been prepared and characterized by X-ray crystallography. Both complexes, [Ag₂(Et₃BET)₂ (NO₃)₂] (1) and [Ag₂(Et₃BET)₂]_n (ClO₄)_2n (2), contain centrosymmetric bis-carboxylato-bridged Ag₂(carboxylato-O,O′)₂ dimers (Ag---O = 2.16–2.23 Å). The dimeric unit in 1 is bound to a chelating nitrato group [Ag---O = 2.524(3), 2.619(3) Å] at each axial site, resulting in a discrete molecule. In 2 the dimers are extended into a stair-like cationic chain via the coordination of each metal centre by a carboxylato oxygen atom [Ag---O =2.565(5) Å] from an adjacent unit. The intra-dimer Ag… Ag distance is 2.928(1) Å for 1 and 2.856(2) Å for 2.