Determination of molindone enantiomers in human plasma by high-performance liquid chromatography-tandem mass spectrometry using macrocyclic antibiotic chiral stationary phases

A sensitive and selective bioanalytical assay was developed and validated for the determination of enantiomeric molindone in human plasma using high-performance liquid chromatography-tandem mass spectrometry along with supported liquid extraction procedures. The chiral separation was evaluated and optimized on macrocyclic antibiotic type chiral stationary phases (CSPs) based on teicoplanin aglycone (Chirobiotic TAG) in polar organic, polar ionic, and reversed-phase mode chromatography, respectively. Complete baseline separation was achieved on a Chirobiotic TAG column under isocratic condition in reversed-phase chromatography. The method validation was conducted using a Chirobiotic TAG column (100 mm x 2.1 mm) over the curve range 0.100-100 ng/ml for each molindone enantiomer using 0.0500 ml of plasma sample. The flow rate was 0.8 ml/min and the total run time was 9 min. Supported liquid extraction in a 96-well plate format was used for sample preparation. Parameters including recovery, matrix effect, linearity, sensitivity, specificity, carryover, precision, accuracy, dilution integrity, and stability were evaluated. The intra- and inter-day precision and accuracy of the quality control samples at low, medium, and high concentration levels were RSD 相似文献   

Characterization and biological evaluation of paclitaxel-loaded poly(L-lactic acid) microparticles prepared by supercritical CO2

In this study, paclitaxel loaded poly( L-lactic acid) (PTX-PLLA) microparticles were prepared using solution enhanced dispersion by supercritical CO2(SEDS) technique. This supercritical antisolvent technique offers the advantage of negligible organic solvent residua in the drug loaded microparticles. Scanning electron microscopy (SEM) showed that microparticles exhibited rather spherical shape and small particle size with narrow particle size distribution. X-ray diffraction (XRD) and differential scanning calorimeter (DSC) indicated that PTX was amorphously dispersed in the PLLA matrix. The drug loading and encapsulation efficiency of PTX-PLLA microparticles were 14.33% and 62.68%, respectively. In vitro cytotoxicity evaluation of PTX-PLLA microparticles against nonsmall-cell lung cancer A549 and ovarian cancer SKOV3 cell lines indicated that PTX-PLLA had superior antiproliferation activity against the A549 and SKOV3 cell lines, compared with free PTX formulations. The cellular internalization of fluorescent microparticles was evidenced by fluorescence microscope and further confirmed by transmission electron microscopy (TEM). This was attributed to the efficient intracellular accumulation of PTX via cell phagocytosis and sustained release of PTX from PLLA matrix. The anticancer activity of PTX-PLLA was associated with PTX-induced cell apoptosis such as nuclear aberrations, condensation of chromatin and swelling damage in mitochondria. The cell apoptosis index detected by flow cytometry was higher in PTX-PLLA group than in free PTX. The PTX-PLLA formulation, which was obtained through micronization of PTX and encapsulation of micronized PTX into PLLA simultaneously in the SEDS process, significantly potentiated the anticancer activity of PTX.     

CO adsorption on Ag(100) and Ag/MgO(100)

Theoretical studies of CO adsorption on a two-layer Ag(100) film and on a two-layer Ag film on a MgO(100) support are reported. Ab initio calculations are carried at the configuration interaction level of theory using embedding methods to treat the metal-adsorbate region and the extended ionic solid. The metal overlayer is considered in two different structures: where Ag-Ag distances are equal to the value in the bulk solid, and for a slightly expanded lattice in which the Ag-Ag distances are equal to the O-O distance on the MgO(100) surface. The calculated adsorption energy of Ag(100) on MgO(100) is 0.58 eV per Ag interfacial atom; the Ag-O distance is 2.28 A. A small transfer of electrons from MgO to Ag occurs on deposition of the silver overlayer. CO adsorption at an atop Ag site is found to be the most stable for adsorption on the two-layer Ag film and also for adsorption on Ag deposited on the oxide; CO adsorption energies range from 0.12 to 0.19 eV. The CO adsorption energy is reduced for the Ag/MgO system compared to adsorption on the unsupported metal film thereby providing evidence for a direct electronic effect of the oxide support at the metal overlayer surface. Expansion of the Ag-Ag distance in the two-layer system also reduces the adsorption energy.     

Laser-induced Fluorescence Excitation Spectrum of NiS in 15500-17200 cm^-1

The laser-induced fluorescence excitation spectrum of jet-cooled NiS molecule has been recorded in the energy range of 15500 17200 cm-1. Fifteen bands have been assigned as three transition progressions：[15.65]^3Ⅱ1（v′=0-4）-X^3∑0^-（v″=0）,[15.69]^3∑0^-（v′=0-4）-X^3∑0^-（v″=0）,and [15.81]^3Ⅱ1（v′=0-4）-X^3∑0^-（v″=0）.Spectroscopic constants for the three newly identified electronically excited states have been determined for the first time. In addition,the lifetimes for most observed vibronic bands have also been measured.     

Adsorbed para-nitrophenol on HDTMAB organoclay--a TEM and infrared spectroscopic study

para-Nitrophenol adsorbed on hexadecyltrimethylammonium bromide modified montmorillonite has been studied using a combination of X-ray diffraction TEM and infrared spectroscopy. Upon formation of the organoclay, the properties change from hydrophilic to hydrophobic. It is proposed that para-nitrophenol is adsorbed onto the water in the cation hydration sphere of the organoclay. As the cation is replaced by the surfactant molecules the para-nitrophenol replaces the surfactant molecules in the clay interlayer. Significant changes in the water vibrations occur in this process. Bands attributed to CH stretching and bending vibrations in general decrease as the concentration of the surfactant (CEC) increases up to 1.0 CEC. After this concentration the bands increase approaching a value the same as that of the surfactant. Strong changes occur in the HCH deformation modes of the methyl groups of the surfactant. These changes are attributed to the methyl groups locking into the siloxane surface of the montmorillonite. Such a concept is supported by changes in the SiO stretching bands of the montmorillonite siloxane surface. This study demonstrates that para-nitrophenol will penetrate into the untreated clay interlayer and replace the intercalated surfactant in surfactant modified clay, resulting in the change of the arrangement of the intercalated surfactant.     

Tetraphenylpyrazine-based AIEgens: facile preparation and tunable light emission

Research on aggregation-induced emission (AIE) has been a hot topic. Due to enthusiastic efforts by many researchers, hundreds of AIE luminogens (AIEgens) have been generated which were mainly based on archetypal silole, tetraphenylethene, distyrylanthracene, triphenylethene, and tetraphenyl-1,4-butadiene, etc. To enlarge the family of AIEgens and to enrich their functions, new AIEgens are in high demand. In this work, we report a new kind of AIEgen based on tetraphenylpyrazine (TPP), which could be readily prepared under mild reaction conditions. Furthermore, we show that the TPP derivatives possess a good thermal stability and their emission could be fine-tuned by varying the substituents on their phenyl rings. It is anticipated that TPP derivatives could serve as a new type of widely utilized AIEgen, based on their facile preparation, good thermo-, photo- and chemostabilities, and efficient emission.     

Dense layers of vertically oriented WO3 crystals as anodes for photoelectrochemical water oxidation

Films of crystalline WO(3) nanosheets oriented perpendicular to tungsten substrates were grown by a surfactant-free hydrothermal method, followed by sintering. The films exhibit photoelectrochemical oxygen evolution at low overpotential.     

Morphology transformation via pH-triggered self-assembly of peptides

Three flexible peptides (P1: (C(17)H(35)CO-NH-GRGDG)(2)KG; P2: (Fmoc-GRGDG)(2)KG; P3: (CH(3)CO-NH-GRGDG)(2)KG) self-assembled to form a variety of morphologically distinct assemblies at different pHs. P1 formed nanofibers at pH 3, then self-assembled into nanospheres with pH up to 6 and further changed to lamellar structures when the pH value was further increased to 10. P2 aggregated into an entwined network structure at pH 3, and then self-assembled into well-defined nanospheres, lamellar structures, and vesicles via adjusting the pH value. However, P3 did not self-assemble into well-ordered nanostructures, presumably due to the absence of a large hydrophobic group. The varying self-assembly behaviors of the peptides at different pHs are attributed to molecular conformational changes. These self-assembled supramolecular materials might contribute to the development of new peptide-based biomaterials.     

Designed double layer assembly: a three-dimensional open framework with two types of cavities by connection of infinite two-dimensional bilayer

A photoluminescent three-dimensional coordination polymer containing two types of cavities is prepared by the covalent linkage of 2D bilayer motif with linear connecting ligand.     

A graphene oxide-based AIE biosensor with high selectivity toward bovine serum albumin

Graphene oxide (GO) was found to effectively enhance the selectivity of aggregation-induced emission (AIE) biosensors, and a new method based on GO and AIE molecules was proposed to detect bovine serum albumin (BSA) with high sensitivity and selectivity.