The determination of trace amounts of tin by flow-injection hydride generation atomic-absorption spectrometry with on-line ion-exchange separation and preconcentration

A hydride generation atomic-absorption spectrometric (AAS) method with flow-injection (FI), aimed at developing a practical routine assay for the determination of tin in food digests, is described. In order to modify the sample matrix and to achieve optimized and reproducible conditions for the hydride generation reaction, the analyte is initially converted into its chlorostannate-complex thereby allowing it to be separated and preconcentrated on-line on an incorporated micro-column packed with a strongly basic anion exchanger and subsequently to be eluted by diluted nitric acid under strictly controlled conditions. Optimum acidic conditions for the FI hydride generation AAS system was found to be 0.01-0.05M nitric acid. At a consumption of 2.7-ml sample volume, aspirated by time-based injection, the procedure resulted in an enrichment factor of 3.5 and yielded a detection limit of 0.08 microg/l. (3sigma) at a sampling frequency of 72/hr. The precision was 2.5% rsd at the 10 microg/l. level. Potential interferents, such as Ni(II), Co(II), Zn(II) and Fe(III) could, at a Sn level of 10 microg/l., be tolerated at an excess of 1000 times without impairing the assay, while a 100-1000-fold excess of Cu(II) decreased the signal by 10-15%. Recoveries in the range 94-102% were obtained for canned food sample digests spiked with 10 microg/l. Sn.     

对称性和配合物的构型——Ⅱ.混合配体配合物

从库仑定律出发,采用最优化法,计算了MLaL_b′型配合物各种几何异构体的几何构型稳定化能。在计算中考虑了配体L、L′的相对电荷。 计算结果表明,对称性是决定构型的首要因素。具体构型与配体的相对电荷有关。 在若干配合物中,中心原子的dⁿ构型决定其构型的骨架。 配体对构型的作用也应予考虑。对共价性程度大的配合物,应考虑轨道重叠对构型的影响。     

Gaseous nitryl azide N4O2: A joint theoretical and experimental study

Gaseous nitryl azide N₄O₂ is generated by the heterogeneous reaction of gaseous ClNO₂ with freshly prepared AgN₃ at −50 °C. The geometric and electronic structure of the molecule in the gas phase has been characterized by in situ photoelectron spectroscopy (PES) and quantum chemical calculations. The experimental first vertical ionization energy of N₄O₂ is 11.39 eV, corresponding to the ionization of an electron on the highest occupied molecular orbital (HOMO) {4a″(π_{nb(N4–N5–N6)})}⁻¹. An apparent vibrational spacing of 1600 ± 60 cm⁻¹ (ν_asO1N2O3) on the second band at 12.52 eV (π_{nb(O1–N2–O3)}) further confirms the preference of energetically stable chain structure in the gas phase. To complement the experimental results, the potential-energy surface of this structurally novel transient molecule is discussed. Both calculations and spectroscopic results suggest that the molecule adopts a trans-planar chain structure, and a five-membered ring decomposition pathway is more favorable.     

苯偶氮罗丹宁类显色剂的合成及其与铜的显色反应

报道５－（４＇－氯－２＇－羧基苯偶氮）罗丹宁（２），５－（４＇－溴－２＇－羧基苯偶氮）罗丹宁（３）和５－（４＇－碘－２＇羧基苯偶氮）罗丹宁（４）的合成及在水溶液中的离奶常数Ｋ和Ｋ研究它们与铜的显色反应，在弱酸性时，３种显色剂与铜均形成配位比为２：１的配合物，２与铜的显色反应，当铜浓度在０～２．５μｇ／ｍＬ范围内符合比耳定律。用分光光度法测定了合金中铜的含量。     

Application of the slotted quartz tube in flow-injection flame atomic-absorption spectrometry

The slotted quartz has been applied to flow-injection flame atomic-absorption spectrometry (FI-FAAS) showing several important advantages. The tube life was improved by a factor of 5-6 compared to conventional continuous aspiration. Flow impact systems were found not to be necessary in the applications so that larger enhancement factors may be achieved without sacrifice in precision. For 1.0 mg/l. copper, 1.0 mg/l. lead, 0.1 mg/l. cadmium and 1.0 mg/l. gold sensitivity enhancement factors of 3.1, 5.5, 5.3 and 4.0 were obtained with precisions of 1.3%, 1.1%, 1.6% and 1.7% RSD (n = 11) respectively. Application of the slotted quartz tube FI-FAAS method to the determination of heavy metals in urine has shown improved tolerance to interfering matrices. Recoveries obtained by spiking undiluted urine samples with 0.1 mg/l. copper and lead, and 0.01 mg/l. cadmium were in the range 100-102%.     

Micranoic acids A and B: two new octanortriterpenoids from Schisandra micrantha

Two novel octanortriterpenoids, micranoic acids A (1) and B (2), along with three known compounds, kadsuric acid (3), 3beta-hydroxy-lanost-9(11),24(25)-dien-26-oic acid (4) and schizandronic acid (5), were isolated from the leaves and stems of Schisandra micrantha. The structures of 1 and 2 were determined by 1D and 2D NMR spectroscopic analysis. Micranoic acids A and B represent a new group of triterpenes in which the entire C-17 side chain has lost. This is the first report of octanortriterpenoids isolated from the family Schisandraceae.     

有机官能化MSU-x孔分子筛的界面特征

MSU- x是自 M41S系列介孔分子筛问世以来所合成的另一类新型介孔分子筛材料 ,它具有三维立体交叉排列的 " worm- like"孔道结构特征及采用中性模板剂、廉价无毒等诸多合成优点 [1～ 4],有着潜在的应用价值 .为了改善纯硅的介孔材料的表面和孔道性质 ,扩大其应用领域 ,除了在骨架引入金属离子或在其孔道中负载催化活性物质外 ,对介孔材料进行有机官能化制备无机-有机杂化材料改善其骨架和孔道性质是当前研究的热点之一 [5].正是由于活性有机基团的存在 ,使得这些材料可直接用于催化反应 ,或作为中间介质成为其它络合离子的主体 .由于有机基…     

Sensitive detection of a plant virus by electrochemical enzyme-linked immunoassay

The electrochemical enzyme-linked immunoassay increases the sensitivity of the detection of cucumber mosaic virus (CMV) by 5-fold compared with the spectrophotometric o-phenylenediamine (OPD) enzyme-linked immunosorbent assay (ELISA). The detection limit for the purified CMV is 1.0 ng/mL and the highest dilution ratio of the infected leaf sap is 1:5.0 x 10(4). The method is based on coupling the oxidation reaction of o-aminophenol (OAP)-H2O2 catalyzed by HRP-IgG conjugate with the electro-reduction of the enzymatic product. The enzymatic product 2-aminophenoxazine-3-one exhibits a sensitive second order derivative linear-sweep voltammetric response at the potential of -0.65 V (vs. Ag/AgCl) in pH 8.0 Britton-Robinson (B-R) buffer solution. So it can be applied to the detection of the plant virus with highly improved sensitivity.     

Electrochemical studies on the interaction of heparin with crystal violet and its analytical application

In this paper, crystal violet (CV) was used to determine heparin concentration by linear sweep voltammetry on a dropping mercury electrode (DME). In Britton-Robinson (B-R) buffer solution, pH 3.0, CV had a well-defined second-order derivative linear sweep voltammetric reductive wave at −0.74 V (vs. SCE). After the addition of heparin to the CV solution, the reductive peak current decreased greatly with the positive movement of the peak potential and without appearance of new peaks in the scanning potential range. Based on the decrease in the reductive peak current, a new voltammetric method for the determination of heparin was established. The conditions for the interaction and the electrochemical detection were optimized, and interfering substances were investigated. Under the optimal conditions, the decrease in reductive peak currents of CV was proportional to heparin concentration in the range 0.1–8.0 mg/L with the linear regression equation Δip″(nA) = 400.42 + 1563.11c (mg/L), (n = 14, γ = 0.993). The detection limit was 0.092 mg/L. This new method was further successfully applied to the determination of heparin content in heparin sodium injection samples with satisfactory results. The binding ratio and binding mechanism were also studied by the electrochemical method. The text was submitted by the authors in English.     

A facile preparation of nanocrystalline Mo2C from graphite or carbon nanotubes

Nanocrystalline Mo₂C powders were successfully synthesized at 500 °C by reacting molybdenum chloride (MoCl₅) with C (graphite or carbon nanotube) in metallic sodium medium. X-ray powder diffractometer (XRD), transmission electron microscope (TEM), X-ray photoelectron spectroscope (XPS) and surface area analyzer (BET method) were used to characterize the samples. Experiments reveal that the carbon source used for the carbide synthesis has a great effect on the particle size and the surface area of the samples. When micro-sized graphite was used as C source the obtained nanocrystalline Mo₂C powder consists of particles of 30∼100 nm, with a surface area of 2.311 m²/g. When carbon nanotubes were used as C source, the as-synthesized Mo₂C sample is composed of particles of 20∼50 nm, with a surface area of 23.458 m²/g, which is an order of magnitude larger than that of the carbide prepared from the graphite.