Facile synthesis of 9-（N-amino-4-fluoromethyl-3-pyrrolidinyl）-2- fluoro-6-aminopurine from trans-4-hydroxy-L-proline

A novel and simple procedure for synthesis of azanucleoside by Mitsunobu reaction between N-(p-nitrobenzyloxycarbonyl)- trans-4-hydroxy-D-proline methyl ester obtained from trans-4-hydroxy-L-proline after six-step reaction and 2-fluoro-6-azidopurine is described,and azanucleoside is fluorinated by new fluridizer 2,2-difluoro-1,3-dimethylimidazolidine (DFI).All reactions could be carded out under mild condition.     

Studies on fluorenscence resonance energy transfer between CdS nanoparticles and DOCAI dyes

The water-soluble CdS nanoparticles were synthesized in aqueous solution. A novel fluorescence resonance energy transfer (FRET) system with CdS nanoparticles as energy donors and 3,30-diethyl-oxadicarbocyanine iodide (DOCAI) dyes as energy accepter has been developed.     

Preparation of flame retardant polyamide 6 composite with melamine cyanurate nanoparticles in situ formed in extrusion process

This paper is focused on in situ preparation of melamine cyanurate (MCA) nanoparticles from reaction of melamine (MEL) and cyanuric acid (CA) and their flame retardant polyamide 6 (PA6) composite in the extrusion process through a novel reactive processing method. Fourier transform infrared (FT-IR), X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) were utilized to characterize the in situ formed MCA nanoparticles and their blends with PA6. Introduction of pentaerythritol (LTP) and water-bound plasticizer dioctyl phthalate (DPT) into the extrusion reaction system greatly inhibits the evaporation of water required for melamine and cyanuric acid reaction at high temperature (higher than 180 °C), laying a foundation for successful in situ preparation of MCA through reactive processing. XRD and FT-IR measurements indicate that under the effect of pentaerythritol, dioctyl phthalate and water, melamine really reacts with cyanuric acid to in situ form MCA in extrusion process. The reaction degree is close to 100%. A very important finding through SEM is that the in situ formed MCA particles, which were found to have aspect ratio of about 7.5, radial size in the range of 70-300 nm (mostly 70-90 nm) and crystallite size of less than 22 nm, are uniformly dispersed in the matrix PA6 at nanoscale. The in situ formed MCA nanoparticles greatly improve the flame retardancy and the mechanical properties of flame-retarded PA6 materials, and the introduced plasticizer dioctyl phthalate also ameliorates the related impact property. The obtained flame-retarded PA6 materials have good comprehensive performance with flame retardancy UL-94 V-0 rating at 1.6 and 3.2 mm thickness, tensile strength 48.0 MPa, elongation at break 106.3% and Izod notched impact strength 8.92 kJ/m². Compared with flame-retarded PA6 material with in situ formed MCA, the one prepared through conventional blending of PA6 with commercial MCA product has improved tensile strength but deteriorated impact strength and flame retardancy.     

A vacuum ultraviolet photoionization mass spectrometric study of acetone

The photoionization and dissociative photoionization of acetone have been studied at the photon energy range of 8-20 eV. Photoionization efficiency spectra for ions CH3COCH3+, CH3+, C2H3+, C3H3+, C3H5+, CH(2-)CO+, CH3CO+, C3H4O+, and CH3COCH2+ have been measured. In addition, the energetics of the dissociative photoionization has been examined by ab initio Gaussian-3 (G3) calculations. The computational results are useful in establishing the dissociation channels near the ionization thresholds. With the help of G3 results, the dissociation channels for the formation of the fragment ions CH3CO+, CH2CO+, CH3+, C3H3+, and CH3COCH2+ have been established. The G3 results are in fair to excellent agreement with the experimental data.     

电动势法测定Cu(Ⅰ)与乙炔生成配合物的热力学函数

乙炔与Cu(I)生成配合物的热力学函数文献报道鲜见,且不同作者的测定结果差异较大。本文用改进的电动势法。对在氯丁橡胶、聚氯乙烯,乙醛等工业过程有重大意义的Cu(I)与乙炔配合物进行测定,得到更合理的结果。     

锆氢化反应研究 Ⅰ.酯类及双官能团化合物的锆氢化反应

本工作以一氯一氢二茂锆为还原试剂,对苯甲酸苯乙酯和苯甲酸甲酯进行还原,对还原的条件及水解产物的分离鉴定进行了研究。并对同时含酯基与其它官能团的几种化合物进行了选择性还原,列出了官能团还原先后的顺序,对结果进行了讨论。     

中性芳烃稀土有机配合物的合成、结构及性能研究——Ⅲ.RE(C_6H_6)(AlCl_4)_3C_6H_6(RE=La,Nd)的合成及Nd(C_6H_6)(AlCl_4)_3C_6H_6的晶体结构

将加热活化的AlCl_3与三氯化稀土在苯溶液中反应,合成了2个新的轻稀土中性芳烃配合物RE(C_6H_6)(AlCl_4)_3C_6H_6(RE=La或Nd)。并用元素分析和红外光谱对其进行了表征。测定了含Nd配合物的晶体结构。对2个配合物结构的比较表明,中心金属离子对配合物的结构无明显影响,其键参数的差别主要来自“镧系收缩”。     

Determination of the Enantiomeric Purity of l-Carnitine and Acetyl-l-Carnitine by Chiral Liquid Chromatography

A chiral liquid chromatographic method for determination of the enantiomeric purity of both l-carnitine and acetyl-l-carnitine is described. Separation of the enantiomers of dl-carnitine and acetyl-dl-carnitine was achieved on a commercial chiral column (Chiralcel OD-R) after derivatization with (alpha-bromo)methyl phenyl ketone. Introduction of this lipophilic UV chromophoric group to the carnitine and acetylcarnitine molecules improved their retention, resolution, and UV detection. The mobile phase was 74:26 (v/v) 0.5 mol L^-1 sodium perchlorate–acetonitrile, pH 3.8, and the flow rate was 0.4 mL min^-1. Detection was performed at 235 nm. The method is selective and reliable for determination of the enantiomeric purity of bulk drug substances l-carnitine and acetyl-l-carnitine.