液相色谱-三重串联四极杆质谱测定粮油中的黄曲霉毒素

建立了超声提取-液相色谱-电喷雾三重串联四极杆质谱测定玉米、大米、大豆等粮油固体样品中黄曲霉毒素B1、B2、G1和G2(AFB1、AFB2、AFG1和AFG2)的方法。分析前对样品进行超声提取,优化得到最佳超声提取条件: 溶剂为甲醇-水(含40 g/L NaCl) (80:20, v/v)溶液、料液比为1:3(g:mL)、温度为50 ℃、时间为3 min。然后对提取的样品进行免疫亲和特异性净化。最后与液相色谱-电喷雾三重串联四极杆质谱联用,使用C18反相色谱柱,流动相为甲醇-10 mmol/L乙酸铵水溶液梯度洗脱,以黄曲霉毒素M1(AFM1)作为内标进行定量测定。结果表明,AFB1、AFB2、AFG1和AFG2的检出限分别为0.002、0.004、0.004和0.012 μg/kg。方法的加标回收率为87%～111%,日内相对标准偏差(RSD)和日间RSD分别不大于6.7%和5.6%。实验结果表明该方法可以有效地降低基质效应的影响,相比于外标法能极大地提高方法的准确度。     

SCR脱硝催化剂失活及其原因研究

以运行后的蜂窝型SCR（Selective catalytic reduction）催化剂和新鲜催化剂为研究对象。应用红外光谱、氮气吸脱附、X射线衍射、电镜扫描等手段对新鲜催化剂及运行后催化剂进行表征。结果表明,运行后催化剂表面官能团发生了变化,比表面积严重降低,载体（TiO₂）产生了型变,并且催化剂表面微粒出现了团聚现象。对运行后催化剂活性降低的原因进行了研究,结果表明,脱硝催化剂在运行过程中遭遇了突发性高温(如t> 650℃),导致活性出现劣化。此外,催化剂表面沉积物中水溶性离子及砷、磷等物质也对催化活性产生了影响。     

溶剂诱导聚合物结晶的研究进展

溶剂诱导结晶(SINC)又称为液体诱导结晶,它是结晶性高聚物在溶剂(或包括其蒸汽)作用下,在低于通常Tg下诱导结晶,而在高于通常Tg时能加速结晶的现象。本文主要对溶剂诱导结晶的机理、动力学和形态学进行了讨论。     

PREPARATION AND ELECTROCHEMICAL CHARACTERISTICS OF POLYMER ELECTROLYTE MEMBRANES BASED ON SAN/PVDF-HFP BLENDS

A copolymer of poly(acrylonitrile-co-styrene) (SAN) was synthesized via an emulsion polymerization method. Novel polymer electrolyte membranes cast from the blends of poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP), SAN and fumed silica (SiO2) are microporous and can be used in polymer lithium-ion batteries. The membrane shows excellent characteristics such as high ionic conductivity and good mechanical strength when the mass ratio between SAN and PVDF-HFP and SiO2 is 3.5/31.5/5. The ionic conductivity of the membrane soaked in a liquid electrolyte of 1 mol/L LiPF6/EC/DMC/DEC is 4.9×10-3 S cm-1 at 25℃. The membrane is electrochemical stable up to 5.5 V versus Li /Li in the liquid electrolyte. The influences of SiO2 content on the porosity and mechanical strength of the membranes were studied. Polymer lithium-ion batteries based on the membranes were assembled and their performances were also studied.     

动物源性食品中四环素类残留分析研究进展

综述了检测动物源性食品中四环素类残留的前处理方法,包括固相萃取、固相微萃取、基质分散技术、分子印迹技术、限进介质材料;对高效液相色谱、毛细管电泳、微生物法和酶联免疫分析等在四环素类药物中的检测应用进行了综述,比较了各种方法的优缺点。     

微波辅助合成法制备聚酰胺-胺树枝状分子修饰的开管毛细管电色谱柱

采用微波辅助合成技术,快速制备以聚酰胺-胺(poly(amidoamine),PAMAM)树枝状分子为固定相的开管毛细管电色谱柱.与常规合成方法相比,微波辅助合成法可以提高反应速度,极大地缩短制备周期.在pH 5.7～8.0范围内, 随着PAMAM树枝状分子代数的增加,毛细管电渗流(EOF)逐步下降.对丙氨酸和脯氨酸进行分离的实验结果表明,随着PAMAM树枝状分子代数的增加,分离度逐步增大,3代PAMAM树枝状分子修饰的毛细管柱具有良好的分离效果.以丙酮标记物连续测定10 d,柱效下降3.85%, 表明采用微波辅助合成技术制得的PAMAM树枝状分子修饰的毛细管柱具有良好的稳定性.     

氟醚链的合成及超分子性能研究

以2,3,5,6-四氟-1,4-苯二甲醇为原料,经选择性单醚化、溴代及酯化反应合成了一种新型的氟醚链(Ⅰ),通过IR、MS、1H NMR对目标化合物和中间体结构进行了确证.以此作为富π电子供体和缺π电子联吡啶大环化合物环双(百草枯-亚苯基)四阳离子环蕃(CPQT)自组装形成新型准轮烷Ⅱ(I-CPOT),并利用1HNMR化学位移变化跟踪该准轮烷在温度调控下的分子开关功能.     

Fabrication of nano-sized Ca(OH)2 with excellent adsorption ability for N2O4

Uniform nano-sized calcium hydroxide (Ca(OH)₂) monocrystal powder was synthesized from calcium oxide in a surfactant solution via a digestion method by decreasing the surface tension of the reaction system to control the growth of crystalline Ca(OH)₂. The Ca(OH)₂ monocrystal powder samples were characterized by means of scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), and Fourier transform-infrared spectroscopy (FT-IR). The NO_x adsorption ability of the samples was evaluated, and the influence of various types and concentrations of surfactants on powder agglomeration and then the specific surface area in the precipitation process were studied. The specific surface area of the samples was found as high as 58 m²/g and 92 m²/g and the particle size, 300–400 nm and 200–300 nm in the presence of 10 wt% PEG600 and 0.086 mL/L SDS at a reaction time of 5 h, respectively. The product has an exceptionally strong adsorption ability for NO_x, which makes it a highly promising adsorbent for emission control and air purification.     

基于坐标映射的类周期电磁金属阵列布局设计的灵敏度分析方法

特定性能的类周期电磁金属阵列已成功应用于多种类型的电磁器件中,以实现其电磁辐射或散射性能的提升设计.类周期电磁金属阵列可描述为由多个相似形状的电磁金属单元按照特定的布局形式组合形成.布局形式由阵列的布局参数确定,通常包括每个单元的尺寸、转角以及位置参数.布局参数往往规模较大且相互独立,需要经过设计优化以满足阵列的性能要...