Algebraic properties of cryptosystem PGM

In the late 1970s Magliveras invented a private-key cryptographic system calledPermutation Group Mappings (PGM). PGM is based on the prolific existence of certain kinds of factorization sets, calledlogarithmic signatures, for finite permutation groups. PGM is an endomorphic system with message space ℤ_|G| for a given finite permutation groupG. In this paper we prove several algebraic properties of PGM. We show that the set of PGM transformations ℐ _G is not closed under functional composition and hence not a group. This set is 2-transitive on ℤ_|G| if the underlying groupG is not hamiltonian and not abelian. Moreover, if the order ofG is not a power of 2, then the set of transformations contains an odd permutation. An important consequence of these results is that the group generated by the set of transformations is nearly always the symmetric group ℒ_|G|. Thus, allowing multiple encryption, any permutation of the message space is attainable. This property is one of the strongest security conditions that can be offered by a private-key encryption system. S. S. Magliveras was supported in part by NSF/NSA Grant Number MDA904-82-H0001, by U.S. West Communications, and by the Center for Communication and Information Science of the University of Nebraska.     

Experimental study of effect of void volume fraction on neutron diffusion parameters in water

The dependence of the diffusion parameters including slowing down area, neutron diffusion length and migration length on the voided volume fraction in water has been studied experimentally. For this purpose, the PIEAS Neutron Transport Facility (PNTF) comprised of a 10 Ci Am–Be neutron source and a water filled aluminum tank with Perspex voided tubes has been designed and fabricated. A BF₃ detector was used for the neutron counting. The slowing down area was determined at the cadmium cutoff level. The diffusion parameters were determined first in the absence of voids. The experimentally measured values of the slowing down area, the diffusion length and the migration length have been found in good agreement with the corresponding values determined by other workers. By varying void volume fraction from 0% to 7.5%, the experimental measurements show a monotonic increase in the slowing down area from 58.71±2.6 to 71.28±3.2 cm², in the diffusion length from 2.95±0.13 to 3.11±0.13 cm and in the migration length from 8.21±0.165 to 8.99±0.169 cm. Our measurements show that the diffusion parameters exhibit a quadratic dependence on the void volume fraction.     

Oxidation of Styrene to Benzaldehyde Catalyzed by Schiff Base Functionalized Triazolylidene Ni(II) Complexes

Four new Schiff base functionalized 1,2,3-triazolylidene nickel complexes, [Ni-(L₁NHC)₂](PF₆)₂; 3, [Ni-(L₂NHC)₂](PF₆)₂; 4, [Ni-(L₃NHC)](PF₆)₂; 7 and [Ni-(L₄NHC)](PF₆)₂; 8, (where L₁NHC = (E)-3-methyl-1-propyl-4-(2-(((2-(pyridin-2-yl)ethyl)imino)methyl)phenyl)-1H-1,2,3-triazol-3-ium hexafluorophosphate(V), 1, L₂NHC = (E)-3-methyl-4-(2-((phenethylimino)methyl)phenyl)-1-propyl-1H-1,2,3-triazol-3-ium hexafluorophosphate(V), 2, L₃NHC = 4,4′-(((1E)-(ethane-1,2-diylbis(azanylylidene))bis(methanylylidene))bis(2,1-phenylene))bis(3-methyl-1-propyl-1H-1,2,3-triazol-3-ium) hexafluorophosphate(V), 5, and L₄NHC = 4,4′-(((1E)-(butane-1,4-diylbis(azanylylidene))bis(methanylylidene))bis(2,1-phenylene))bis(3-methyl-1-propyl-1H-1,2,3-triazol-3-ium) hexafluorophosphate(V), 6), were synthesised and characterised by a variety of spectroscopic methods. Square planar geometry was proposed for all the nickel complexes. The catalytic potential of the complexes was explored in the oxidation of styrene to benzaldehyde, using hydrogen peroxide as a green oxidant in the presence of acetonitrile at 80 °C. All complexes showed good catalytic activity with high selectivity to benzaldehyde. Complex 3 gave a conversion of 88% and a selectivity of 70% to benzaldehyde in 6 h. However, complexes 4 and 7–8 gave lower conversions of 48–74% but with higher (up to 90%) selectivity to benzaldehyde. Results from kinetics studies determined the activation energy for the catalytic oxidation reaction as 65 ± 3 kJ/mol, first order in catalyst and fractional order in the oxidant. Results from UV-visible and CV studies of the catalytic activity of the Ni-triazolylidene complexes on styrene oxidation did not indicate any clear possibility of generation of a Ni(II) to Ni(III) catalytic cycle.     

Synthesis,anti‐migration and burning rate catalytic mechanism of ferrocene‐based compounds

One of the most important components of solid rocket propellant is the burning rate catalysts (BRC) which enhance burning rate of solid composite propellant. Low‐pressure exponents and stable burning rate are the key features of an excellent solid propellant. Addition of BRC to the propellant results in the increase of burning rate of the propellant and decrease in pressure exponents. Among all BRC, ferrocene‐based BRC have attracted much attention because of their better microscopic homogeneities in distribution, ignitability of the propellants and good compatibility with organic binder. However, the main barrier for the development and practical applications of ferrocene‐based BRC is their migration property. This article reviews the field and highlights recent progress. Copyright © 2014 John Wiley & Sons, Ltd.     

Novel Azobenzene-Functionalized Polyelectrolytes of Different Substituted Head Groups 2: Control of Surface Wetting in Self-Assembled Multilayer Films

A novel set of light-responsive polyelectrolytes has been developed and studied, to control and tune surface wettability by introducing various types of substituted R head-groups of azo polyelectrolytes in self-assembled multilayer (SAMU) films. As part of a larger project to develop polymer surfaces where one can exert precise control over properties important to proteins and cells in contact, photo-reversibly, we describe here how one can tune quite reliably the contact angle of a biocompatible SAMU, containing a photo-reversible azo chromophore for eventual directed cell growth. The azo polyelectrolytes described here have different substituted R head-group pairs of shorter-ionized hydrophilic COOH and SO₃H, shorter non-ionized hydrophobic H and OC₂H₅, and larger non-ionized hydrophobic octyl C₈H₁₇ and C₈F₁₇, and were employed as polyanions to fabricate the SAMU onto silicon substrates by using the counter-charge polycation PDAC. The prepared SAMU films were primarily characterized by measurement of their contact angles with water. The surface wetting properties of the thin films were found to be dependent on the type of substituted R-groups of the azo polyelectrolytes through their degree of ionization, size, hydrophobicity/hydrophilicity, solubility, conformation, and inter-polymeric association and intra-polymeric aggregation. All these factors appeared to be inter-related, and influenced variations in hydrophobic/hydrophilic character to different extents of aggregates/non-aggregates in solution because of solvation effects of the azo polyanions, and were thus manifested when adsorbed as thin films via the SAMU deposition process. For example, one interesting observation is significantly higher contact angles of 79° for SAMU films of larger octyl R groups of PAPEA-C₈F₁₇ and PAPEA-C₈H₁₇ than for others with contact angles of 64° observed for non-polar R-groups of OC₂H₅ and H. Furthermore, lower contact angle values of 59° for SAMU films with polar R-groups of COOH and SO₃H relative to that of non-polar R-groups are in accordance with their expected order of the hydrophilicity or hydrophobicity. It is possible that the large octyl groups are more effective in shielding the ionic functional groups on the substrate surface, and contributed less to the water drop-molecule interactions with ionic groups of the PDAC and/or AA groups. In addition, higher hydrophobicity of the SAMU films may be due to the incorporation of bulky and hydrophobic groups in these polyelectrolytes, which can produce aggregates on the surfaces of the SAMU films. Through understanding and controlling the complex aggregation behavior of the different substituted R-groups of these azo polyelectrolytes, and hence their adsorption on substrates, it appears possible to finely tune the surface energy of these biocompatible films over a wide range, enhance the photo-switching capabilities of the SAMU films, and tailor other surface properties for the development and application of new devices in diverse areas of microfluidics, specialty coatings, sensors, and biomedical sciences.     

Miscellaneous applications of ferrocene‐based peptides/amides

This article provides a critical review of the different applications of ferrocene‐based peptides/amides in biological as well as in non‐biological systems. Ferrocene‐based peptides/amides find many applications in different fields such as materials science, medicine, organic synthesis, bio‐organometallic and biological chemistry, asymmetric catalysis, nonlinear optics, in polymer science as redox active polymers and dendrimers, in molecular recognition as biosensors and in electrochemistry). Extensive research is being done on ferrocene‐based peptides/amides but we will highlight the various applications of ferrocene‐based peptides/amides for the period 2006–2010. The main factors that govern the potential biological and non‐biological applications are an electroactive core, a conjugated linker that can act as a chromophore and lower the oxidation potential of the ferrocene part, an amino acid or peptide derivative that can interact with other molecules via hydrogen bonding or any secondary bonding, and symmetric and asymmetric substitution on the ferrocene moiety. Copyright © 2011 John Wiley & Sons, Ltd.     

小麦秸秆发酵产生的真菌Pleurotus ostreatus IBL-02锰过氧化物酶的溶胶-凝胶固定化及其催化污水脱色(英文)

Solid state bio-processing of wheat straw was carried out through an indigenous fungal strain Pleurotus ostreatus IBL-02 under pre-optimized fermentation conditions. The maximum activity, 692±12 U/mL, of the industrially important manganese peroxidase (MnP) enzyme was recorded after five days of still culture incubation. The crude MnP was 2.1-fold purified with a specific activity of 860 U/mg after purification on a Sephadex-G-100 gel column. On native and SDS-PAGE electrophoresis gels, the purified MnP fraction was a single homogenous band of 45 kDa. An active fraction of MnP was immobilized using hydrophobic sol-gel entrapment comprising tetramethoxysilane (T) and propyltrimethoxysilane (P) at different T:P molar ratios. Characterization revealed that after 24 h incubation at varying pH and temperatures, the MnP fraction immobilized at a T:P ratio of 1:2 in the sol-gel retained 82% and 75% of its original activity at pH4 and 70 ℃, respectively. The optimally active fraction at a 1:2 T:P ratio was tested against MnSO4 as a substrate to determine the kinetic catalytic constants KM and Vmax . To explore the industrial applicability of P. ostreatus IBL-02 MnP, both the free and immobilized MnP were used for the decolorization of four different textile industrial effluents. A maximum of 100% decolorization was achieved for the different textile effluents within the shortest time period. A lower KM , higher Vmax , hyper-activation, and enhanced acidic and thermal resistance up to 70 ℃ were the novel catalytic features of the sol-gel immobilized MnP, suggesting that it may be a potential candidate for biotechnological applications particularly for textile bioremediation purposes.