Measurement and Analysis of Spall Characteristics of High-Pure Aluminium at One-Dimensional Strain Loading

With an impact velocity varying from 196.9m/s to 317.9m/s and ratios of flyer/sample thickness of 2：4 and 3：6, the free-surface velocity profiles of the shock compressed high purity aluminium （HPA 99.999%） samples are measured with a velocity interferometer system for any reflector. Based on the vibrating features of the velocity profiles, the damage behaviour of HPA is analysed. The results indicate that the vibrating amplitude increases with increasing shock stress, and the subsequent reverberations describing the spall become more obvious. When the shock stress in the material is below a critical or smaller than the threshold level, the free-surface velocity profile replicates virtually the form of the compression pulse inside the sample. When the impact stress exceeds a critical value （1.4 GPa）, the micro damage would appear, and the free-surface velocity profile changes significantly, showing a series of short-duration reverberations in the profile. When the impact stress exceeds the threshold of damage, a compressive disturbance called the ＂spall pulse＂ appears in the free-surface velocity profile, and the subsequent reverberation becomes regular again. The measured spall strength of HPA is much higher than those of commercially pure aluminium reported in many references. In addition, the strength of HPA is similar to that of single-crystal aluminium.     

Multipartite State Representations in Multi-mode Fock Space and Their Squeezing Transformations

We present the continuous state vector of the total coordinate of multi-partlcle and the state vector of their total momentum, respectively, which possess completeness relation in multi-mode Fock space by virtue of the integration within an order product （IWOP） technique. We also calculate the transition from classical transformation of variables in the states to quantum unitary operator, deduce a new multi-mode squeezing operator, and discuss its squeezing effect. In progress, it indicates that the IWOP technique provides a convenient way to construct new representation in quantum mechanics.     

A Novel Method for Wavelength Conversion with Dual-pump Four-wave Mixing in a Semiconductor Optical Amplifier

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　ＩｎｔｈｅＷＤＭｎｅｔｗｏｒｋ ,ｔｈｅｄｅｓｉｒａｂｌｅｆｅａｔｕｒｅｓｏｆａｎａｌｌ ｏｐｔｉｃａｌｗａｖｅｌｅｎｇｔｈｃｏｎｖｅｒｔｅｒｉｎｃｌｕｄｅｐｏｌａｒｉｚａｔｉｏｎｉｎｓｅｎｓｉｔｉｖｉｔｙ ,ｔｒａｎｓｐａｒｅｎｃｅｔｏｍｏｄｕｌａｔｉｏｎｆｏｒｍａｔａｎｄｂｉｔ ｒａｔｅ ,ｆｕｌｌｔｕｎａｂｉｌｉｔｙ ,ａｃｃｅｐｔａｂｌｅｏｕｔｐｕｔＳＮＲｏｖｅｒｔｈｅｅｎｔｉｒｅｒａｎｇｅｏｆｔｈｅｗａｖｅｌｅｎｇｔｈｓｕｓｅｄｉｎｔｈｅｎｅｔｗｏｒｋ[1] .Ｗａｖｅ…     

中温烟气脱硫过程中CO2对脱硫剂钙利用率的影响

本文在300～600℃的中温区段,实验研究了CO2在烟气脱硫过程中与钙基脱硫剂发生碳酸盐还原反应,削弱脱硫效果的规律,发现石灰钙利用率随温度升高呈跳跃式变化,并因碳酸盐反应程度的迅速增加而在500℃附近出现低谷.由此明确了减小碳酸盐反应效应,提高脱硫剂钙利用率的途径,为进一步发展中温烟气脱硫工艺提供了重要依据.     

富镧混合稀土-镍贮氢材料CO,O2和H2O中毒的表面特征

本文用UPS,XPS研究了贮氢材料MlNi₅(Ml=La,Ce,Pr,Nd)的CO,O₂和H₂O的中毒,在UPS谱中,我们观察到在E_F以下峰α(0.3eV)和峰b(1.2eV)强度随中毒气体暴露量增加有显著变化,并向低动能端位移,逐渐形成肩峰,与此同时,峰c(6eV)和峰d(9.5eV)的强度随暴露量增加而增加,并有能量位移,配合XPS分析,分别确定相应的化学态。氧中毒后的MlNi₅,经300℃加氢还原,从UPS谱可以看到峰α,b强度增加;H₂O和CO中毒后,在超高真空条件下,分别经300℃加热处理,和Ar⁺剥离方法,均获得类似的效果,XPS分析进一步证实了这些结果。实验给出了贮氢材料MlNi₅中过渡金属镍的d电子与气体自由分子轨道间电荷转移的信息,为在实际应用中认识此类贮氢合金的表面催化中毒和再生提供了依据。 关键词：     

非对称型Kerr类介质膜漏波导中的非线性导波

本文研究了特定边界条件下非对称型Kerr类介质膜漏波导中TE₀光波的传播特性。计算结果表明,介质膜厚存在一临界值。临界值之上没有导波存在,临界值之下能同时存在强场TE₀模和弱场TE₀模,它们具有不同的传播波数。这两个模的膜内传播功率、场强峰值位置随膜厚和光场频率的变化各不相同,色散关系也有极大差别。在对称极限之下,弱场TE₀模的色散为零。 关键词：     

蒸汽活化提高脱硫剂钙利用率的实验研究

本文用小型热态流化床实验台对以ＣａＯ为主要成分的钙基脱硫剂石灰乏吸收剂在１５０～６００℃的温度范围内进行了蒸汽活化处理,进而实验研究了这种处理对提高脱硫剂钙利用率的效果。结合化学成分分析和Ｘ射线衍射的结果初步探讨了蒸汽活化的机理。研究表明,脱硫剂对水蒸汽的物理吸附明显受活化温度的影响,蒸汽活化后的钙利用率提高显著,可能存在一个最佳活化时间。     

双差分测量对流层臭氧的实验研究

 提出了利用266nm,289nm,308nm三波长进行臭氧测量的数值模拟和实际测量实验研究。三波长双差分和双波长差分的模拟实验结果表明,当对流层气溶胶分布相当不均匀,后向散射比梯度较大时,气溶胶对双波长差分测量臭氧影响很大,而对三波长双差分测量臭氧影响较小。     

α-呋喃酯的结构与红外光谱特征

总结和归属了α－呋喃甲酸酯α－呋喃甲醇酯和α－呋喃丙烯酸酯的主要红外吸收谱带和特征,讨论了其红外吸收频率随取代基结构而变化的规律。结果表明：α－呋喃环存在三个明显的吸收特征,α－呋喃丙烯酸酯中ＶＣ＝Ｃ约为１６４１ｃｍ＾－１,δ＝Ｃ－Ｈ面外变角振动频率为９７３ｃｍ＾－１,表明双键为反式构型。ＶＣ＝Ｏ约为１７１３ｃｍ＾－１,Ｃ－Ｏ－Ｃ键对称与伸缩振动在１３０５,１２６２和１１６５ｃｍ＾－１处产生三个强     

圆感应同步器数显表检测方法研究

介绍了圆感应同步器数显表测角系统的工作原理,以及在静态和动态测角方法。提出了两种提高动态测量精度的方法。实验数据验证了方法的合理性。