混合态二能级原子双光子过程中原子的压缩效应

本文采用时间演化算符方法和数值计算研究了相干光场与混合态二能级原子相互作用双光子过程中原子的压缩效应．结果表明：原子初始所处的混合态对原子压缩性质有较大的影响，当０．８５＜Ｓ＜１时，会周期性地呈现出短时的原子压缩效应，随着原子初始混合程度的增大，原子越来越远离压缩状态．     

屏蔽人体模型对电磁波吸收的数值模拟研究

本文用时域有限差分法计算了三类电磁特性不同的材料屏蔽下三层无限长椭圆柱人体模型对电磁波的吸收。结果表明 ,功率密度相同 ,频率在 0 .2～ 6GHz之间的平面电磁波照射下 ,模型吸收的能量、能量在体内的分布及两者对入射电磁波频率的敏感程度严重地受到外加屏蔽的影响。考察了屏蔽材料的电磁特性与其屏蔽效能之间的关系。三类材料的比较显示 ,对人体电磁辐射防护 ,耗散材料优于非耗散材料 ,导电材料优于非导电材料。     

基因芯片荧光图象采集与分析

描述了基因芯片荧光图象的光学共聚焦成象,大范围高速扫描与控制,数据采集的原理和方法.并讨论了基因芯片荧光图象的分析算法,即模板定位与阈值分割相结合的半自动算法,并将其计算结果与完全采用人工分割算法的结果进行了比较.     

Three-Step Predictor-Corrector of Exponential Fitting Method for Nonlinear Schroedinger Equations

We develop the three-step explicit and implicit schemes of exponential fitting methods. We use the three- step explicit exponential fitting scheme to predict an approximation, then use the three-step implicit exponential fitting scheme to correct this prediction. This combination is called the three-step predictor-corrector of exponential fitting method. The three-step predictor-corrector of exponential fitting method is applied to numerically compute the coupled nonlinear Schroedinger equation and the nonlinear Schroedinger equation with varying coefficients. The numerical results show that the scheme is highly accurate.     

Effect of ion impinging on the microstructure and field emission of carbon nanotubes

Effects of ion impinging on the microstructure and field electron emission properties of screen-printed carbon nanotube films were investigated. We observed that the plasma treatment modified the microstructure of CNTs along with the remarkable increase of emission site density. With the prolongation of ion impinging time, the emission current falls down first, and then rises up to higher than that of the untreated films. It is proposed that the change of emission characteristics is due to the different emission mechanisms. After the treatment, electrons are emitted predominantly from the nano-nodes on the tube wall instead from the nanotube tips.     

一类流行病数学模型解的研究

该文讨论了一类非线性抛物型方程组解的性质，利用微分方程上、下解方法证明了初值适当小时，方程存在整体解；初值适当大时，解在有限时间上爆破，推广了文献[1]的结果．     

Multilinear interpolation between adjoint operators

Multilinear interpolation is a powerful tool used in obtaining strong-type boundedness for a variety of operators assuming only a finite set of restricted weak-type estimates. A typical situation occurs when one knows that a multilinear operator satisfies a weak L^q estimate for a single index q (which may be less than one) and that all the adjoints of the multilinear operator are of similar nature, and thus they also satisfy the same weak L^q estimate. Under this assumption, in this note we give a general multilinear interpolation theorem which allows one to obtain strong-type boundedness for the operator (and all of its adjoints) for a large set of exponents. The key point in the applications we discuss is that the interpolation theorem can handle the case q?1. When q>1, weak L^q has a predual, and such strong-type boundedness can be easily obtained by duality and multilinear interpolation (cf. Interpolation Spaces, An Introduction, Springer, New York, 1976; Math. Ann. 319 (2001) 151; in: Function Spaces and Applications (Lund, 1986), Lecture Notes in Mathematics, Vol. 1302, Springer, Berlin, New York, 1988; J. Amer. Math. Soc. 15 (2002) 469; Proc. Amer. Math. Soc. 21 (1969) 441).     

基于可重构FPGA技术的自适应FIR滤波器的实现

有限冲激响应(FIR)滤波器设计遇到的难题是滤波要进行大量乘法运算,即使是在全定制的专用集成电路中也会导致过大的面积与功耗.对于用硬件实现系数是常量的专用滤波器,可以通过分解系数变为应用加、减和移位而实现乘法.FIR滤波器的复杂性主要由用于系数乘法的加法器/减法器的数量决定.而对于自适应FIR滤波器,大多数场合下可用数字信号处理器(DSP)或CPU通过软件编程的方法来实现,但是对于要求高速运算的场合,VLSI实现是很好的选择.基于这一考虑,可以用符号数的正则表示(CSD)码表示系数, 再利用可重构现场可编程门阵列(FPGA)技术实现.可重构结构的应用,能保证系统的其余部分同时处于运行状态时实现FIR滤波器系数的更新.文中利用CSD码和可重构思想,提出了用FPGA实现自适应FIR滤波器的一种方案.     

通信瓶颈下的实时并行任务分配研究

提出了实时并行任务粒度划分的具体设计方法，采用了系统内通信迟延最小的约束条件进行多处理器上的任务分配，解决了高速实时信号处理中的数据通信瓶颈问题。在自行设计的超立方体结构的通用信号处理机上，实现了空时二维自适应信号处理和SAR实时成像，显著减小了数据通信迟延，提高了并行效率和性价比。