VOn±(n=0,1,2)的势能函数与光谱常数研究

用密度泛函B3LYP/6-311++G(d,p)方法和相对论有效实势(Lanl2dz基组)对VO^n±(n=0,1,2)分子离子的势能函数及光谱常数进行了分析. 结果表明它们都能稳定存在, 其基态电子状态分别是:⁴Σ(VO^2-), ³Σ(VO^-), ⁴Σ(VO), ³Σ(VO⁺)和²Σ(VO²⁺). 其中VO^2-和VO²⁺的势能函数曲线呈“火山口”型, 属于亚稳态分子离子. 用七参数Murell-Sorbie势拟合VO^2-和VO²⁺分子亚稳态双原子分子离子势能函数, 发现其拟合曲线与势能函数曲线符合得很好. 同时,讨论了电荷对势能函数和能级的影响. 关键词： 分子离子 密度泛函理论 势能函数 能级     

LaB6在低压强氮气和氦气中的放电特性

 研究了LaB₆在1~10 Pa氮气和氦气中的直流和脉冲放电特性以及放电过程对电极的影响。结果表明，电极直径为5 mm的LaB6氦气放电管在脉冲工作状态下可以长期稳定放电。在脉冲电压为2.2 kV、脉冲宽度10 ms、频率13.3 Hz下，脉冲峰值放电电流超过120 A。氦气放电管在放电过程中，阴极表面有离子的清洗和活化作用，可以使电极的表面逸出功降低，提高放电管的发射能力和稳定性。LaB₆作为气体放电电极具有寿命长、延迟时间短、放电电流大等优点，可用于重复强流脉冲气体放电的高压高速开关器件。     

Preparation, characterization and photocatalytic activity of polycrystalline Bi2O3/SrTiO3 composite powders

Bi₂O₃/SrTiO₃ composite powders have been prepared and their photocatalytic activities were investigated by photooxidation of methanol. These powders were characterized by UV-Visible diffuse reflectance spectra, SEM and X-ray diffraction (XRD). The results revealed that all the Bi₂O₃/SrTiO₃ composite powders exhibited higher photocatalytic activity than pure SrTiO₃, Bi₂O₃ and TiO₂ (P25) under visible light irradiation (λ>440 nm). The effects of the Bi₂O₃ contents on the photocatalytic activities of the composite powders were examined, the photocatalytic activities increased with the content of Bi₂O₃ increasing to a maximum of 83% and then decreased under visible light irradiation. The effects of the calcination temperatures on the photocatalytic activities of the composite powders were also investigated.     

用于二聚物三能级蒸气激光系统的环形谐振腔设计

针对二聚物三能级蒸气激光系统增益相对于泵浦光方向显著的不对称特性,本文设计了一种稳定的能够充分利用介质增益特性的环形谐振腔,给出了象散和慧差补偿及泵浦激光与谐振腔匹配的条件。文中还给出了Na_2B~1Ⅱ_u-X~1∑_g~+跃迁激光谐振腔设计数据。     

催化动力学光度法测定痕量钴(Ⅱ)

本法基于钴 (Ⅱ )对高碘酸钾氧化孔雀绿的催化作用 ,提出一种灵敏地测定痕量钴 (Ⅱ )的新方法。该方法线性范围在 0～ 0 8μg·2 5mL- 1 ,检测限为 2 1× 10 - 1 0 g·mL- 1 。测定出反应表现活化能Ea=37 94kJ·mol- 1 。此法用于茶叶、维生素B1 2 中钴的测定 ,结果满意     

Non-destructive evaluation of residual stresses in thin films via x-ray diffraction topography methods

Quantitative x-ray diffraction topography techniques have been used to measure the residual strain magnitude and uniformity of deposition for Mo and W sputtered films on Si(100) substrates. High sensitivity rocking curve measurements were able to determine differential strains for films as thin as 2.5 nm; while Bragg angle contour mapping had similar sensitivity and was also able to assess coating uniformity and stress distribution over areas covering a whole wafer. Measurements of strain versus film thickness over a range of 2.5 nm to 80 nm showed that a critical thickness exists for maximum residual strain. Growth beyond this range produces stress relaxation. This non-destructive type of analysis could be employed on a wide range of film-substrate combinations.     

Effect of nonlinear wave-current interaction on flow fields and hydrodynamic forces

A fifth-order theory for solving the problem of interaction between Stokes waves and exponential profile currents is proposed. The calculated flow fields are compared with measurements. Then the errors caused by the linear superposition method and approximate theory are discussed. It is found that the total wavccurrent field consists of pure wave, pure current and interaction components. The shear current not only directly changes the flow field, but also indirectly does so by changing the wave parameters due to wave-current interaction. The present theory can predict the wave kinematics on shear currents satisfactorily. The linear superposition method may give rise to more than 40% loading error in extreme conditions. When the apparent wave period is used and the Wheeler stretching method is adopted to extrapolate the current, application of the approximate theory is the best. Project supported by the Chinese Academy of Sciences.     

GF(2)上本原多项式的三项倍式的次数研究

研究了二元域上本原多项式的三项倍式的计数问题,通过对三项倍式进行分类,导出了本原多项式三项倍式最低次数的一个上界.利用这一结果,使构造本原多项式的次数最低的三项倍式的计算复杂性降到原来的九分之一.     

3mm波段极近距离雷达

提出一种极近距离雷达概念，并导出其作用距离公式，在此基础上研制出一台３ｍｍ波段极近距离多普勒雷达样机．试验结果表明该雷达结构简单，成本低廉，在作用距离为零点几米至几米范围内可获得较高的定距精度．     

一种新颖的半导体光放大器镀膜监控方法

本文介绍了一种在半导体光放大器镀膜过程中监测端面反射率的简单而有效的方法。理论模型的建立考虑了光放大器的漏电流和自发发射速率随载流于浓度的非线性变化，并且基于实验测量的ＰＩ（输出功率与注入电流）曲线，采用曲线拟合的方法来修正一些依赖于器件的参数，理论计算结果与有关文献的测量结果较好地吻合。