335 GHz非平衡式肖特基二极管三倍频器

基于混合集成的方式,采用对称锥形渐变线匹配结构设计了335 GHz非平衡式三倍频器。在保证单模传输的条件下,该匹配结构不仅能够固定二极管位置,而且可以增大匹配效果,解决了高频段倍频器3 dB带宽较窄的问题。实测结果表明,该倍频器在330~356 GHz频率范围内输出功率均大于5 mW。驱动功率为220 mW时,有最高输出功率11.2 mW,由它作为核心器件组成的固态太赫兹本振源,能够驱动超外差接收机中670 GHz二次谐波混频器。     

A Visible and Near-Infrared Light-Fueled Omnidirectional Twist-Bend Crawling Robot

In recent years, although light-driven soft actuators have attracted intense scientific attention and achieved remarkable progress, the design and construction of an intelligent robotic system with maneuverability, self-adaptability, untethered control, and greater freedom of action, in particular the omnidirectional motion capability on a plane, remains challenging. Herein, four types of photo-thermal fillers and an unprecedented twist-bend actuation mode is introduced into a liquid crystal elastomer-based soft robot. The obtained twist-bend crawling robot not only exhibits in situ rotation, four-way turning, and four-way linear motion under light irradiation with four wavelength bands (520, 655, 808, and 980 nm), but also demonstrates the ability to avoid obstacles in complex geographical environments. This work may bring a new perspective for fabrication and development of soft robots that can adapt to dynamic and complex environmental conditions.     

小型化低功耗机载显示器图形系统设计与实现

为了满足机载显示器图形生成系统的小尺寸、低功耗需求,提出了一种基于龙芯2K1000的全国产图形生成与处理方案。该方案以2K1000为核心构建硬件平台,使用2K1000内部集成的中央处理器、图形处理器、显示控制器,以及外部的内存实现图形的计算生成和双缓存显示,配合国产可编程逻辑器件实现图形与外视频的叠加显示及机载通信总线扩展。软件上采用航空专用的国产天脉操作系统,基于天脉操作系统设计了关键的图形显示驱动、帧存驱动、显示控制器驱动。实验结果表明,在输出1 024 pixel×768 pixel分辨率显示时,典型机载图形画面帧率达到35 frame/s,整体功耗约10 W。该方案扩展性强、功耗低,满足实时显示需求,在机载显示器领域有着广泛的应用空间。     

一种宽带注入锁定三倍频器

文章提出了一种宽带注入锁定三倍频器。在传统注入方式基础上,倍频器采用了推-推差分对输入信号进行二倍频,并将产生的二次谐波通过变压器耦合至注入管的源极共模点,增强了注入管源极共模点二次谐波。由于注入电流是由注入信号与源极共模点二次谐波进行混频而产生,因此注入电流也被增强,从而增大了锁定范围。除此之外,三倍频采用了四阶谐振器,谐振阻抗的相位在过零点被平坦化,锁定范围进一步被增大。采用标准CMOS 65 nm工艺设计三倍频,芯片面积为720×670 μm²,1.2-V供电时的功耗为15.2 mW。0 dBm注入功率下三倍频的锁定范围为19.2~27.6 GHz,对应的基波抑制比大于25 dB,二次谐波抑制大于35 dB。注入锁定三倍频器可满足5G收发机中本振源的要求。     

γ—Mo2N合成过程中的热变化及中间产物的研究

采用ＤＴＡ技术，通过改变升温速率研究了γ－Ｍｏ２Ｎ合成过程中的热变化，并经ＸＲＤ，ＢＥＴ及ＩＲ测试，对ＤＴＡ曲线中的谱峰进行归属，考察了中间产物，ＤＴＡ结果表明，在ＭｏＯ３和ＮＨ３程序升温反应过程中有放热峰及吸热峰出现，且随升温速率的长高，放热峰面积与吸热峰面积之比逐渐减小，结合ＸＲＤ及ＩＲ结果可知，ＤＴＡ曲线听放热峰可归属为由ＭｏＯ３变化为ＭｏＯ２的还原峰，吸热峰则归属为由ＭｏＯ２变化为Ｍｏ２Ｎ     

DFT study of the conductance of molecular wire:The effect of coupling geometry and intermolecular interaction on the transport properties

The density functional theory (DFT) combining with the non-equilibrium Green functions (NEGF) method is applied to the study of the electronic transport properties for a Di-thiol-benzene (DTB) molecule coupled to two Au(111) surfaces. The dependence of the transport properties on the bias, the coupling geometry of the molecule-electrode interface, and the intermolecular interaction are examined in detail. The results show that the existence of the hydrogen atom at the end of the DTB molecule would significantly decrease the transmission coefficients, and then the differential conductance (dI/dV). By changing the position of the DTB molecule located between two electrodes a maximum value of calculated current is observed. It is also found that the intermolecular interaction will strongly influence the transport properties of the system studied.     

Preparation of Europium Induced Conformation—specific anti—calmodulin Monoclonal Antibody

Monoclonal antibody technique was employed to detect the conformational difference of CaM induced by metal ions. A trivalent europium ion induced conformation-specific anti-calmodulin monoclonal antibody was successfully prepared with europium-saturated calmodulin as antigen.     

两种结构钼磷酸的催化氧化行为

考察了Dawson与Keggin结构钼磷酸的催化氧化行为,并与结构特性进行了关联,结果发现,Dawson结构的杂多酸对氧化脱氢及插入氧反应均有更高的活性。     

Indirect Determination of Captopril with Sodium Nitrate and Thiocyanate by Floatation Separation of Copper

A new method for indirect determination of captopril (CPT) with NaNO₃ and NH₄SCN by floatation and separation of copper has been studied. In the weak acid, a small amount of Cu(II) can be reduced to Cu(I) by CPT, then Cu(I) reacted with the SCN, which can float on the surface of the liquid phase with NaNO₃. A good linear relationship is observed between the floatation yield (E%) of Cu(II) and the amount of captopril. The linear range is 2?32 mg/L. On the ground, captopril can be indirectly determined by determining E(%) of Cu(II). The method is simple, rapid, reliable and has good selectivity. The developed method can be applied to indirect determination of captopril with satisfactory results.