Self-consistent calculation of the lasing eigenmode of thedielectrically apertured Fabry-Perot microcavity with idealized ordistributed Bragg reflectors

Optical confinement in the dielectrically apertured Fabry-Perot microcavity is investigated theoretically. The apertured region is first treated as embedded in an idealized planar waveguide to show that the confined eigenmode's resonant frequency can cut off parasitic waveguide modes existing outside the aperture, and lead to three-dimensional optical confinement. For more realistic cavities with nonunity mirror reflectivities, self-consistent calculations of the eigenmode characteristics are performed for the limit of an optically thin aperture to derive the lowest order confined eigenmode frequency, threshold susceptibility, and mode profile. The analysis is then extended to treat dielectric cavities based on Bragg reflectors     

An error and sensitivity analysis of the atmospheric- andsoil-correcting variants of the NDVI for the MODIS-EOS

Several soil- and atmospheric-correcting variants of the normalized difference vegetation index (NDVI) have been proposed to improve the accuracy in estimating biophysical plant parameters. In this study, a sensitivity analysis, utilizing simulated model data, was conducted on the NDVI and variants by analyzing the atmospheric- and soil-perturbed responses as a continuous function of leaf area index. Percent relative error and vegetation equivalent “noise” (VEN) were calculated for soil and atmospheric influences, separately and combined. The NDVI variants included the soil-adjusted vegetation index (SAVI), the atmospherically resistant vegetation index (ARVI), the soil-adjusted and atmospherically resistant vegetation index (SARVI), the modified SAVI (MSAVI), and modified SARVI (MSARVI). Soil and atmospheric error were of similar magnitudes, but varied with the vegetation index. All new variants outperformed the NDVI. The atmospherically resistant versions minimized atmospheric noise, but enhanced soil noise, while the soil adjusted variants minimized soil noise, but remained sensitive to the atmosphere. The SARVI, which had both a soil and atmosphere calibration term, performed the best with a relative error of 10 percent and VEN of ±0.33 LAI. By contrast, the NDM had a relative error of 20 percent and VEN of ±0.97 LAI     

An efficient lasing action from pyrromethene 556 dye-doped organically modified silicates

Organically modified solid-state silicates (ORMOSILS) doped with a new laser dye 1,3,5,7,8-pentamethylpyrromethene-2,6-disulfonate-BF₂ complex (pyrromethene 556) have been synthesized by a sol-gel method and the compositional effects on pore characteristics, fluorescence and lasing properties have been investigated. It is found that the use of dimethylsulfoxide and γ-glycidoxypropyltrimethoxysilane could greatly change the structure properties of sol-gel derived ORMOSILS cage, and thus the fluorescence and lasing properties of the materials could improve significantly. A successful laser oscillation from this dye-doped ORMOSILS sample has been achieved upon pumping with a Q-switched frequency-doubled Nd:YAG laser at 532 nm. A slope efficiency of 54% with a useful lifetime greater than 10,000 shots has been demonstrated at a pump repetition rate of 1 Hz and a pump intensity of 1 J/cm² by using the new ORMOSILS cage on our newly designed laser system. Our results have shown that it is possible to obtain a high-efficiency with a long-lifetime for a compact new laser device by low cost dye-doped solid-state ORMOSILS.     

Digital filter bank design quadratic-constrained formulation

Formulate the filter bank design problem as an quadratic-constrained least-squares minimization problem. The solution of the minimization problem converges very quickly since the cost function as well as the constraints are quadratic functions with respect to the unknown parameters. The formulations of the perfect-reconstruction cosine-modulated filter bank, of the near-perfect-reconstruction pseudo-QMF bank, and of the two-channel biorthogonal linear-phase filter bank are derived using the proposed approach. Compared with other design methods, the proposed technique yields PR filter banks with much higher stopband attenuation. The proposed technique can also be extended to design multidimensional filter banks     

Sensitivity analysis of lossy coupled transmission lines

An analysis method, based on the numerical inversion of the Laplace transform, is described for the evaluation of the time domain sensitivity of networks that include lossy coupled transmission lines. The sensitivity can be calculated with respect to network components and parameters of the transmission lines. Sensitivity analysis is useful for waveform shaping and optimization. Examples and comparisons with sensitivity determined by perturbation are presented     

Low-threshold interband cascade lasers operating above room temperature

Mid-IR type-II interband cascade lasers were demonstrated in pulsed mode at temperatures up to 325 K and in continuous mode up to 200 K. At 80 K, the threshold current density was 8.9 A/cm² and a continuous wave output power of 140 mW/facet was obtained.     

Optical investigation of cavitation erosion by laser-induced bubble collapse

By means of a new force sensor based on optical beam deflection (OBD), the mechanical effects of laser-matter interaction underwater at different incident laser energy are investigated in detail. The experimental results show that a target underwater is impacted in turn by laser-plasma ablation force and high-speed liquid-jet impulse induced by bubbles collapse in the vicinity of a solid boundary. Furthermore, the amplitudes of the two forces increase monotonously with laser energy. According to the ablation force detected by the experiment and the theoretical relationship between laser intensity and ablation pressure, the value of liquid-jet impact against a solid boundary can be easily obtained. In addition, based on the model of a collapsing bubble, some characteristic parameters, such as the liquid-jet impact velocity, the maximum bubble radius, the bubble energy can also be obtained at different laser energy, which are valuable in the corresponding research fields.     

Investigation of charge effects on poling and stability for corona-poled polymer films

The optimal corona-poling temperature of polymer films was accurately determined by measuring the temperature dependence of the in situ second-harmonic (SH) intensity profile under the applied poling electric field. The in situ SH intensity profile was first measured by probing both the surface voltages and the poling currents induced by surface/space charges for the corona-poled polymer films. Moreover, charge effects on the stability of the chromophore orientation were first studied by using the thermally stimulated discharge-current technique. PACS 72.20.Jv; 42.65.Ky; 73.61.Ph; 81.40.Tv     

Classical Limit of Expectation Values in a Wave Packet Involving Few Stationary States

Expectation values of physical quantities in a wave packet involving few stationary states in an infinite square well are calculated. Explicit results show that the expectation values in the classical limit go over to the corresponding classical quantity in the form of the arithmetic mean (in mathematical term, the Fejér's average) of the partial Fourier series converging to the classical quantity. The number of the stationary states is that of the partial Fourer series in the Fejér's average. The quantum uncertainty is then demonstrated to have a classical counterpart.     

High-speed InGaP/GaAs HBTs with a strained InxGa1-xAs base

A self-aligned InGaP/GaAs heterojunction bipolar transistor with a compositionally graded In_xGa_1-xAs base has been demonstrated with f_T=83 GHz and f_max=197 GHz. To our knowledge, these results are the highest reported for both parameters in InGaP/GaAs HBT's. The graded base, which improves electron transport through the base, results in a DC current gain and a cutoff frequency which are 100% and 20% higher, respectively, than that achieved by an identical device with a nongraded base. The high f_max results from a heavily doped base, self-aligned base contacts, and a self-aligned collector etch. These results demonstrate the applicability of InGaP/GaAs HBT's in high-speed microwave applications