tert-Butyl nitrite induced radical dimerization of primary thioamides and selenoamides at room temperature

A simple and efficient method for the dimerization of primary thioamides into 1,2,4-thiadiazoles using tert-butyl nitrite is described. The optimized condition was also found to be suitable for the dimerization of benzoselenoamides into 1,2,4-selenadiazoles. All the reactions proceed smoothly at room temperature and gave the desired products in excellent yields in a short span of time.     

Studies towards iodine-catalyzed dehydrative-cycloisomerization of pent-4-yne-1,2-diols to di- and tri-substituted furans

An efficient and single-step iodine catalyzed and metal-free synthesis of di and tri-substituted 2-methylfuran derivatives were achieved from 1-popargyl-1,2-diols. Stereospecific synthesis of starting 1,2-diols was achieved by indium mediated Barbier type propargylation on corresponding keto-alcohols or by sodium borohydride mediated reduction of 2-hydroxy-2-propargyl ketones. The furan synthesis proceeded through iodine mediated 5-exo-trig cyclization, dehydration and reductive deiodination. The method was applied to the synthesis of 2-methylfuran fused to phenanthrene, pyrene and acenaphthylene rings.     

Proton/Metal–Ligand Stability Constants of Complexes of Sr(II), Cr(II), and Al(III) with N-Phthaloyl Aminoacid and Benzimidazole Derivatives in Dioxane–Water Mixture

Russian Journal of Physical Chemistry A - Formation of complexes Sr(II), Cr(II), and Al(III) with ligands (1,3-dioxo-1,3-dihydro-2H-isoindol-2-yl)acetic acid (L1),...     

ADYTIA: Adaptive and Dynamic TCP Interface Architecture for heterogeneous networks

Due to the widespread popularity and usage of Internet of things (IoT)‐enabled devices, there is an exponential increase in the data traffic generated from these IoT devices. Most of these devices communicate with each other using heterogeneous links having constraints such as latency, throughput, and interference from concurrent transmissions. This results in an extra burden on the underlying communication infrastructure to manage the traffic within these constraints between source and destination. However, most of the existing applications use different Transmission Control Protocol (TCP) variants for traffic management between these devices and are dependent on the stage of the sender, irrespective of the application types and link characteristics. Each operating system (OS) has different TCP variant for all applications, irrespective of path characteristics. Hence, a single TCP variant cannot select the best suitable link, which results in degradation in throughput compared to the existing default. Moreover, it cannot use the full capacity of the available link for different applications and network links, especially in heterogeneous network such as IoT. To cope up with these challenges, in this paper, we propose an Adaptive and Dynamic TCP Interface Architecture (ADYTIA). ADYTIA allows the usage of different TCP variants based on application and link characteristics, irrespective of the physical links of the entire path. It allows the usage of different TCP variants based on their design principle across heterogeneous technologies, platforms, and applications. ADYTIA is implemented on NS‐2 and Linux kernel for real testbed experiments. Its ability to select the best suitable TCP variant results in 20% to 80% improvement in throughput compared with the existing default and single TCP variant on Linux and Windows.     

Irradiation of Transition Metal Dichalcogenides Using a Focused Ion Beam: Controlled Single‐Atom Defect Creation

Manipulation and structural modifications of 2D materials for nanoelectronic and nanofluidic applications remain obstacles to their industrial‐scale implementation. Here, it is demonstrated that a 30 kV focused ion beam can be utilized to engineer defects and tailor the atomic, optoelectronic, and structural properties of monolayer transition metal dichalcogenides (TMDs). Aberration‐corrected scanning transmission electron microscopy is used to reveal the presence of defects with sizes from the single atom to 50 nm in molybdenum (MoS₂) and tungsten disulfide (WS₂) caused by irradiation doses from 10¹³ to 10¹⁶ ions cm^?2. Irradiated regions across millimeter‐length scales of multiple devices are sampled and analyzed at the atomic scale in order to obtain a quantitative picture of defect sizes and densities. Precise dose value calculations are also presented, which accurately capture the spatial distribution of defects in irradiated 2D materials. Changes in phononic and optoelectronic material properties are probed via Raman and photoluminescence spectroscopy. The dependence of defect properties on sample parameters such as underlying substrate and TMD material is also investigated. The results shown here lend the way to the fabrication and processing of TMD nanodevices.     

Benzodithiophene Hole‐Transporting Materials for Efficient Tin‐Based Perovskite Solar Cells

Developing efficient interfacial hole transporting materials (HTMs) is crucial for achieving high‐performance Pb‐free Sn‐based halide perovskite solar cells (PSCs). Here, a new series of benzodithiophene (BDT)‐based organic small molecules containing tetra‐ and di‐triphenyl amine donors prepared via a straightforward and scalable synthetic route is reported. The thermal, optical, and electrochemical properties of two BDT‐based molecules are shown to be structurally and energetically suitable to serve as HTMs for Sn‐based PSCs. It is reported here that ethylenediammonium/formamidinium tin iodide solar cells using BDT‐based HTMs deliver a champion power conversion efficiency up to 7.59%, outperforming analogous reference solar cells using traditional and expensive HTMs. Thus, these BDT‐based molecules are promising candidates as HTMs for the fabrication of high‐performance Sn‐based PSCs.     

High Diversity Gain MIMO-Antenna for UWB Application with WLAN Notch Band Characteristic Including Human Interface Devices

Wireless Personal Communications - In this paper, a UWB–MIMO antenna with the WLAN band-notch (5.1–5.85 GHz) characteristic is offered. This antenna consists of two radiated...     

An Experimental Evaluation of Link Outage Due to Beam Wander in a Turbulent FSO Link

Wireless Personal Communications - Wireless communication using free space optics (FSO) is becoming attractive for data transmission purposes. However, the system performance gets affected by...     

A policy based framework for quality of service management in software defined networks

Growth in multimedia traffic over the Internet increases congestion in the network architecture. Software-Defined Networking (SDN) is a novel paradigm that solves the congestion problem and allows the network to be dynamic, intelligent, and it centrally controls the network devices. SDN has many advantages in comparison to traditional networks, such as separation of forwarding and control plane from devices, global centralized control, management of network traffic. We design a policy-based framework to enhance the Quality of Service (QoS) of multimedia traffic flows in a potential SDN environment. We phrase a max-flow-min-cost routing problem to determine the routing paths and presented a heuristic method to route the traffic flows in the network in polynomial time. The framework monitors the QoS parameters of traffic flows and identifies policy violations due to link congestion in the network. The introduced approach dynamically implements policy rules to SDN switches upon detection of policy violations and reroutes the traffic flows. The results illustrate that the framework achieves a reduction in end-to-end delay, average jitter, and QoS violated flows by 24%, 37%, and 25%, respectively, as compared to the Delay Minimization method. Furthermore, the proposed approach has achieved better results when compared to SDN without policy-based framework and reduced end-to-end delay, average jitter, and QoS violated flows by 51%, 62%, and 28%, respectively.

     

Solution‐Processed High‐Performance Tetrathienothiophene‐Based Small Molecular Blends for Ambipolar Charge Transport

Four soluble dialkylated tetrathienoacene ( TTAR) ‐based small molecular semiconductors featuring the combination of a TTAR central core, π‐conjugated spacers comprising bithiophene ( bT ) or thiophene ( T ), and with/without cyanoacrylate ( CA ) end‐capping moieties are synthesized and characterized. The molecule DbT‐TTAR exhibits a promising hole mobility up to 0.36 cm² V^?1 s^?1 due to the enhanced crystallinity of the microribbon‐like films. Binary blends of the p‐type DbT‐TTAR and the n‐type dicyanomethylene substituted dithienothiophene‐quinoid ( DTTQ‐11 ) are investigated in terms of film morphology, microstructure, and organic field‐effect transistor (OFET) performance. The data indicate that as the DbT‐TTAR content in the blend film increases, the charge transport characteristics vary from unipolar (electron‐only) to ambipolar and then back to unipolar (hole‐only). With a 1:1 weight ratio of DbT‐TTAR DTTQ‐11 in the blend, well‐defined pathways for both charge carriers are achieved and resulted in ambipolar transport with high hole and electron mobilities of 0.83 and 0.37 cm² V^?1 s^?1, respectively. This study provides a viable way for tuning microstructure and charge carrier transport in small molecules and their blends to achieve high‐performance solution‐processable OFETs.