Structural models of the bimetallic subunit at the A-cluster of acetyl coenzyme a synthase/CO dehydrogenase: binuclear sulfur-bridged Ni-Cu and Ni-Ni complexes and their reactions with CO

The Ni(II)-dicarboxamido-dithiolato complexes (Et4N)2[Ni(NpPepS)] (1) and (Et4N)2[Ni(PhPepS)] (2) were used as Nid metallosynthons in the construction of higher nuclearity dinuclear Ni-Cu and Ni-Ni species to model the bimetallic Mp-Nid site of the A-cluster of acetyl coenzyme A synthase/CO dehydrogenase (ACS/CODH). Reaction of 1 with [Cu(neo)Cl] and [Ni(terpy)Cl2] in MeCN affords the dinuclear complexes (Et4N)[Cu(neo)Ni(NpPepS)] (3) and [Ni(terpy)Ni(NpPepS)] (4), respectively. Reaction of 2 with [Ni(dppe)Cl2] in MeCN yields [Ni(dppe)Ni(PhPepS)] (6). The Ni-Cu complex 3 exhibits no redox chemistry at the Nid site and no reaction with CO. In contrast, the Nip sites in 4 and 6 are readily reduced (characterized by their Ni(I) EPR spectra) and bind CO, exhibiting nuco bands at 2044 and 1997 cm-1, respectively, indicating terminal CO binding. The present Ni-Ni systems replicate the structural and chemical properties of the A-cluster site in ACS/CODH and support the presence of Ni at Mp in the catalytically active enzyme.     

End-to-end single cyanato and thiocyanato bridged Cu(II) polymers with a new tridentate Schiff base ligand: crystal structure and magnetic properties

A new tridentate Schiff base ligand HL (L = C14H19N2O), derived from the condensation of benzoylacetone and 2-dimethylaminoethylamine in a 1:1 ratio, reacts with copper(ii) acetate and cyanate, thiocyanate or azide, to give rise to several end-to-end polymeric complexes of formulae [CuL(mu(1,3)-NCO)]n 1, [CuL(mu(1,3)-NCS)]n 2 and the complex 3 has two crystallographically independent units of formula [CuL(N3)] in the asymmetric unit cell. Complex 3 exists in dimeric form rather than as a polymeric chain. Compound 1 is the first report of a singly end-to-end cyanate bridged polymeric chain of Cu(II) with a Schiff base as a co-ligand. There are many examples of double NCS bridged polymeric chains, but fewer singly bridged ones such as compound 2. We have characterized these complexes by analytical, spectroscopic, structural and variable temperature magnetic susceptibility measurements. The coordination geometry around the Cu(II) centers is distorted square pyramidal for 1 and 2 and square planar for complex 3. The magnetic susceptibility data show slight antiferromagnetic coupling for the polymers having J values -0.19 and -0.57 cm(-1) for complexes 1 and 2 respectively. The low values of J are consistent with the equatorial-axial disposition of the bridges in the polymers.     

Amino Acid based cationic surfactants in aqueous solution: physicochemical study and application of supramolecular chirality in ketone reduction

The present study provides a molecular understanding of the origin of the chirality in aqueous micelles and its correlation with the proficiency of stereoselective ketone reduction. The effects of varied headgroup architecture on the surface-active properties as well as on other microstructural parameters were studied and correlated to the structural differences of these naturally occurring amino acid containing surfactants (1-4). Micropolarity sensed by pyrene showed that the micelles prepared using 1-4 are mostly hydrated; particularly large headgroup size surfactant produces more polar environment. A theoretical study was done to quantify the varied spatial dissymmetry for all four surfactants. Asymmetric reduction of prochiral ketones was carried out at the aqueous micellar interface of these chiral amphiphiles by exploiting the supramolecular chirality as evidenced from a circular dichroism study. The enantioselectivity of the reduction process is rationally improved through increase in spatial dissymmetry and steric constraint imposed at the micellar interface by the polar head of surfactants.     

Photopolymerization of methyl methacrylate with the use of bromine as photoinitiator

Low concentrations of bromine (0.008–0.06M) were used to initiate photopolymerization of MMA in bulk and in diluted (near bulk) systems, the diluents or solvents used being benzene, toluene, dioxane, tetrahydrofuran, carbon tetrachloride, chloroform, methylene chloride, and methanol. Polymerization in bulk follows usual free-radical kinetics. Inert solvents (benzene, toluene) as well as the other solvents used enhance the rate of polymerization MMA even when used in the range of catalytic concentrations (0.04–0.4M). An initiation mechanism involving solvent molecules appears to be predominant in diluted systems.     

Intermolecular force constants of hcn in the condensed phase

A simple theory of linear lattice is applied to the hydrogen bonded linear chain system of HCN to calculate the intermolecular force constants at different temperatures in the condensed phase. The strong CN bond is assumed to remain unperturbed in the hydrogen bond formation. The sharp change in intermolecular force constant while passing from the crystalline to the liquid phase is interpreted as a characteristic of this phase transition (fusion).     

Fully aromatic thermotropic liquid crystalline polyesters of substituted 4,4′-biphenols. IV. Homopolyesters with terephthalic acid and copolyesters with terephthalic acid and 4-hydroxybenzoic acid

A series of fully aromatic thermotropic polyesters based on mono-, di-, and tetra-substituted biphenols was prepared by the melt polycondensation method and examined for their thermotropic behavior by a variety of experimental techniques. The homopolyesters obtained from substituted biphenols containing either one phenyl or two phenyl groups as substituent(s) and TA formed nematic melts, but the homopolymers of the substituted biphenols containing either four sec-butyl groups or two tert-butyl groups with TA had melting transitions, T_m, above 400°C. Thus, it was not possible to determine whether they formed nematic melts. On copolymerization with 30 mol % HBA most of the resulting copolyesters had much lower T_m values, compared to those of respective homopolyesters, and the copolymers of the biphenol monomer containing the tert-butyl groups formed a nematic melt at an observable temperature. However, the copolymer of the biphenol with sec-butyl groups still had a T_m above 400°C. © 1993 John Wiley & Sons, Inc.     

Nitrosyl rhenium complexes: Syntheses,properties, and structures of acetylacetonato derivatives

Some new complexes of rhenium containing monocoordinating acetylacetone viz. [Re(NO)(acac)₂(Cl)H₂O], Re(NO)(acac)₃(acacH)(H₂O)₂ have been synthesized by reacting acetylacetone with either Re(NO)Cl₃ · H₂O or Re(NO)(OH)₃ · H₂O. The preparation of [Re(NO)(py)(acac)₂(Cl) · H₂O], [Re(NO)(acac)(OH)(Cl) · H₂O], [Re₂(NO)₂(acacH)₃(acac)₂ · Cl₄], [Re(NO)(acac)₂(OH) · H₂O] · 2 H₂O have also been described. These complexes were characterized through their elemental analyses, u.v., vis, i.r., ¹Hn.m.r., magnetic, and conductance data.     

Magnetic behaviour of spin-mixed iron(III) porphyrins

Detailed average magnetic susceptibility (295-4.2 K) and average magnetisation (20-2 K, 50-10 kOe) are reported for two novel spin-mixed iron(III) porphyrins, namely Fe(TPP)ClO4 and Fe(OEP)ClO4. The results confirm an S = 3/2 ground state substantially spin-mixed with a low-lying S = 5/2 state, but do not agree in detail with the crystal-field model of Maltempo.     

Thermal investigations on γ-radiation processed natural medicinal products (Ashwagandha,Amla and Hartiki)

DSC and TG studies were carried out on -radiation processed Indian natural products of medicinal importance, namely Ashwagandha (Withania Somnifera), Amla (Emblica Officinalis) and Hartiki (Terminalia chebula). DSC thermoanalytical curves were recorded from 35 to 400°C in air and nitrogen atmosphere. Similarly, TG thermoanalytical curves were taken from 35 to 700°C in air and nitrogen atmosphere. Irradiated products gave significantly different thermoanalytical profiles in comparison to non-irradiated samples. The differences were observed above decomposition temperature of 200°C and were non-linear with respect to radiation dose. Partial oxidation of the products during irradiation in air could be responsible for the observed differences.