Energy Aware Signal Processing for Software Defined Radio Baseband Implementation

The fast pacing diversity and evolution of wireless communications require a wide variety of baseband implementations within a short time-to-market. Besides, the exponentially increased design complexity and design cost of deep sub-micron silicon highly desire the designs to be reused as much as possible. This yields an increasing demand for reconfigurable/ programmable baseband solutions. Implementing all baseband functionalities on programmable architectures, as foreseen in the tier-2 SDR, will become necessary in the future. However, the energy efficiency of SDR baseband platforms is a major concern. This brings a challenging gap that is continuously broadened by the exploding baseband complexity. We advocate a system level approach to bridge the gap. Specifically, we fully leverage the advantages (programmability) of SDR platforms to compensate its disadvantages (energy efficiency). Highly flexible and dynamic baseband signal processing algorithms are designed and implemented to exploit the abundant dynamics in the environment and the user requirement. Instead of always performing the best effort, the baseband can dynamically and autonomously adjust its work load to optimize the average energy consumption. In this paper, we will introduce such baseband signal processing techniques optimized for SDR implementations. The methodology and design steps will be presented together with 3 representative case studies in HSDPA, WiMAX and 3GPP LTE.     

Solid deformation induced by the adsorption of methane and methanol under sub- and supercritical conditions

Carbonaceous materials with some degree of flexibility in their physical structure can expand or contract under the influence of the forces exerted by adsorbed molecules. To gain insight into how adsorption of non-polar and polar fluids could deform a carbon solid, we present GCMC simulations of sub- and supercritical adsorption of methane and methanol in slit-shaped pores whose walls are made of graphene layers. Our extensive simulation study shows that there is a strong correlation between solvation pressure and solid deformation, and that the expansion or contraction of the pore strongly depends on adsorbate loading, temperature and pore size.     

On the formation mechanism for electrically generated exciplexes in a carbazole–pyridine copolymer

Although carbazole‐containing copolymers are frequently used as hole‐transporting host materials for polymer organic light‐emitting diodes (OLEDs), they often suffer from the formation of undesired exciplexes when the OLED is operated. The reason why exciplexes sometimes form for electrical excitation, yet not for optical excitation is not well understood. Here, we use luminescence measurements and quantum chemical calculations to investigate the mechanism of such exciplex formation for electrical excitation (electroplex formation) in a carbazole–pyridine copolymer. Our results suggest that the exciplex is formed via a positively charged interchain precursor complex. This complex is stabilized by interactions that involve the nitrogen lone pairs on both chain segments. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

How Modifying Third‐Party Information Affects Interpersonal Impressions and the Evaluation of Collaborative Online Media

Previous research has drawn upon warranting theory to help explain how viewers evaluate people and entities online. Extending previous research, this study assesses how the ability of a target to modify third‐party information affects perceptions of warranting value, and in turn, interpersonal impressions and the perceived legitimacy of online media that host evaluations. Additionally, this work explores how the perceived objectivity of a third‐party evaluator affects impressions in online settings. The results provide support for warranting theory and help clarify how impressions are formed in online environments when people have the ability to generate and modify content collectively. The theoretical implications this study has for warranting theory and future research directions are discussed.     

The Fundamental Basis for Cyclopolymerization. VII. A Cyclopolymerization Study of Certain Allylcycloalkenes

The cyclopolymerization characteristics of 3-allylcyclopentene, 3 allylcyclopentene, 3-allylcyclohexene, and 4-allylohexene were studied and the extent of their cyclopolymerization by cationic initiation were compared with previously reported solvolysis results involving the same intermediate carbonium ion. The results of this study were also compared with previously reported results on 4-vinylcyclohexene and 1, 4-dimethylenecyclohexane. The allylcycloalkenes were also polymerized by metal alkyl coordination catalysts and the extent of cyclization in each case was determined. The polymers derived from these monomers invariably contained polymeric fractions (27 to 99%) which were soluble in non-polar organic solvents. Calculations based on NMR spectral data indicated the cationic polymers were 68 to 95% cyclized. The extent of cyclization was found to parallel the interolefinic separation in the monomer. Coordination polymerization yielded somewhat lower ratios of cyclizations (54 to 80%) in all cases except for 4-allylcyclohexene. 4-Allylcyclohexene gave only 5 to 54% cyclization, 4-Vinylcyclohexene, 3-allylcyclopentene, and 3-allylcyclohexene produced soluble copolymers with maleic anhydride. Elemental analysis indicated the composition of these copolymers to be 2:1 molar in maleic anhydride and diene units. A cyclic copolymerization mechanism suggested the formation of a multicyclic repeating unit. The other monomers gave crosslinked polymers since maleic anhydride could not be incorporated into a six-membered ring.     

The effect of carbon nanotubes on epoxy matrix nanocomposites

The paper concerns thermal properties of epoxy/nanotubes composites for aircraft application. In this work, influence of carbon nanotubes on thermal stability, thermal conductivity, and crosslinking density of epoxy matrix was determined. Three kinds of nanotubes were used: non-modified with 1- and 1.5-μm length, and 1-μm length modified with amino groups. Scanning electron microscopy observations were done for examining dispersion of nanotubes in the epoxy matrix. Glass transition temperature (T _g) was readout from differential scanning calorimetry. From dynamic mechanical analysis, crosslinking density was calculated for epoxy and its composites. Also, thermogravimetric analysis was done to determine influence of nanotubes addition on thermal stability and decomposition process of composites. Activation energy was calculated from TGA curves by Flynn–Wall–Ozawa method. Thermal diffusivity was also measured. SEM images proved the uniform dispersion of carbon nanotubes without any agglomerates. It was found that nanotubes modified with amino groups lead to the increase of epoxy matrix crosslinking density. The significant increase in T _g was also observed. On the other hand, addition of carbon nanotubes leads to the decrease of thermal stability of polymer due to the increase of thermal diffusivity.     

The Michael Addition of Enamines to Propenamidines. A Convenient Synthesis of 2β-Amidinoethylcyclo-Alkanones by Amidinoethylation Reaction

A variety of propenamidines 3 have been reacted with enamines of cyclopentanone and cyclohexanone giving after hydrolysis of the Stork enamine 6, 2-β-amidinoethylcyclopentanones 8 and -hexanones 7. This reaction illustrates the electrophilic character of the C=C double bond due to the conjugated amidine function, thus providing with propenamidines 3 a new class of Michael acceptors for enamines.     

Synthesis and mesogenic properties of several homologous series of aldose dialkyl dithioacetals. A model for their behaviour

Abstract

Ten homologous series (n-butyl through n-decyl) of aldose S,S-acetals (D-glucose, D-galactose, D-mannose, L-rhamnose, 2-deoxy-D-glucose, D-xylose, D-lyxose, D- or L-arabinose, D-ribose and 2-deoxy-D-ribose) have been prepared. Most of these compounds form thermotropic liquid crystals, the exceptions being the entire L-rhamnose series and some of the derivatives with the shortest alkyl chains. All of the compounds have been investigated with differential scanning calorimetry and polarization microscopy. Some temperature dependent powder X-ray data are also presented. A model is proposed which correlates the carbohydrate configuration with the melting behaviour. On the basis of now available behaviourial characteristics, visual inspection, mixing experiments and precedent, the mesophase is identified as smectic A_d, the partially overlapping carbohydrate moieties being in the centre and the aliphatic chains pointing outward at an angle of about 62°. Despite the intrinsic chirality of all the carbohydrate mesogens, no evidence for chiral mesophases was found, not even after introduction of a homochiral branched alkyl chain.     

High dynamic range proteome imaging with the structured illumination gel imager

A current challenge for proteomics is detecting proteins over the large concentration ranges found in complex biological samples such as whole‐cell extracts. Currently, no unbiased, whole‐proteome analysis scheme is capable of detecting the full range of cellular proteins. This is due in part to the limited dynamic range of the detectors used to sense proteins or peptides. We present a new technology, structured illumination (SI) gel imager, which detects fluorescently labeled proteins in electrophoretic gels over a 1 000 000‐fold concentration range. SI uses computer‐generated masks to attenuate the illumination of highly abundant proteins, allowing for long exposures of low‐abundance proteins, thus avoiding detector saturation. A series of progressively masked gel images are assembled into a single, very high dynamic range image. We demonstrate that the SI imager can detect proteins over a concentration range of approximately 1 000 000‐fold, making it a useful tool for comprehensive, unbiased proteome‐wide surveys.