Study on Reduction of Energy Consumption in Pulsed Corona Discharge Process for NOx Removal

We investigated the reduction of electrical energy consumption in thepulsed corona discharge process for the removal of nitrogenoxides. Hydrocarbon chemical additives used in the laboratory-scaleexperiment are responsible for the enhancement of the NO conversionthrough the chain reactions of free radicals, such as, R, RCO, RO,and others. Electrical energy consumption per converted NO moleculehas a minimum value of 17 eV when pentanol is injected. When ethyleneand propylene are injected, 30 and 22 eV of electrical energy consumptionare required for the conversion of a NO molecule, respectively. The ratioof the pulse-forming capacitance (C_e) to the reactor capacitance (C_R)plays an important role in the energy transfer efficiency to thereactor. The maximum energy transfer efficiency of approximately 72%could be obtained by the pulse-forming capacitance, which is 3.4 timeslarger than the reactor capacitance; the maximum NO conversionefficiency was also observed with the same condition.     

Self-assembly between silver(I) and di- and tri-2-pyridines with flexible spacer: formation of discrete metallocycle versus coordination polymer

The self-assembly of metallosupramolecules from reactions of flexible 2-pyridyl ligands and silver salts is described. When 1,3-bis(2-pyridyl)propane (L1), tris[(2-pyridyl)methyl]methane (L2), and 1,3-bis(2-pyridyl)-2-tolylpropane (L3) are used in combination with silver ions, novel discrete metallocyclic complexes are formed in crystals. Moreover, the self-assembly of 1,3-bis(2-pyridyl)-2-phenylpropane (L4) with silver nitrate yields a coordination polymer. The examination of its solution shows that this coordination polymer is formed via the solution-based discrete metallocyclic species.     

Self-assemblies of new rigid angular ligands and metal centers toward the rational construction and modification of novel coordination polymer networks

Self-assemblies of rigid angular ligands with 120 degrees molecular angle and metal centers have been investigated with the aim of achieving the rational construction and modification of coordination polymer structures. The reactions of Co(NCS)(2) with 1,3-bis(trans-4-styrylpyridyl)benzene (L(1)()), 2,6-bis(trans-4-styrylpyridyl)pyridine (L(2)()), 1,3-bis(trans-4-styrylpyrimidyl)benzene (L(3)()), and 1,3-bis(trans-4-styrylquinoly)benzene (L(4)()) afford complexes [Co(L(1)())(2)(NCS)(2)]( infinity ) (1), [Co(L(2)())(2)(NCS)(2)]( infinity ) (2), Co(L(3)())(2)(NCS)(2)(CH(3)OH)(2) (3), and [Co(L(4)())(NCS)(2)]( infinity ) (4), respectively. The resulting complexes exhibit open framework, stairlike hydrogen-bonded chain and single-stranded helical coil structures, which are controlled by the variation of the geometry around the coordination site in ligands. Moreover, the coordination of L(1)() and L(2)() to Mn(hfac)(2) (hfac = 1,1,1,5,5,5-hexafluoroacetylacetonate) yields single-stranded helical coordination polymers of [Mn(L(1)())(hfac)(2)]( infinity ) (5) and [Mn(L(2)())(hfac)(2)]( infinity ) (6), respectively.     

Immobilized cobalt/rhodium heterobimetallic nanoparticle-catalyzed silylcarbocylization and carbonylative silylcarbocyclization of 1,6-enynes

Reaction of 1,6-enynes with a hydrosilane in the presence of immobilized cobalt/rhodium bimetallic nanoparticles gives 2-methyl-1-silylmethylidene-2-cyclopentanes in the absence of carbon monoxide and 2-formylmethyl-1-silylmethylidene-2-cyclopentanes under 1 atm of carbon monoxide, respectively. [reaction: see text]     

Synthesis and Cytotoxicity Evaluation of Metal‐Chelator‐Bearing Flavone,Carbazole, Dibenzofuran,Xanthone, and Anthraquinone

2‐(Aryloxymethyl)‐5‐benzyloxy‐1‐methyl‐1H‐pyridin‐4‐ones 8a – 8g , 2‐(aryloxymethyl)‐5‐hydroxy‐4H‐pyran‐4‐ones 9a – 9g , and 2‐(aryloxymethyl)‐5‐hydroxy‐1‐methyl‐1H‐pyridin‐4‐ones 10a – 10g were prepared from the known 5‐benzyloxy‐2‐(hydroxymethyl)pyran‐4‐one ( 3 ) in a good overall yield. These compounds were evaluated in vitro against a three‐cell lines panel consisting of MCF7 (breast), NCI‐H460 (lung), and SF‐268 (CNS), and the active compounds passed on for evaluation in the full panel of 60 human tumor cell lines derived from nine cancer cell types. The results indicated that 5‐hydroxy derivatives are more favorable than their corresponding 5‐benzyloxy precursors ( 10a – 10g vs. 8a – 8g ), and 1‐methyl‐1H‐pyridin‐4‐ones are more favorable than their corresponding pyran‐4(1H)‐ones ( 10a – 10g vs. 9a – 9g ). Among these three types of compounds, 2‐(aryloxymethyl)‐5‐hydroxy‐1‐methyl‐1H‐pyridin‐4‐ones 10a – 10g were the most cytotoxic; they inhibited the growth of almost all the cancer cells tested. On the contrary, compound 8a (a mean GI₅₀=27.8 μM ), 8b (38.5), 8d (11.0), and 8e (30.5) are especially active against the growth of SK‐MEL‐5 (a melanoma cancer cell) with a GI₅₀ of <0.01, 5.65, 0.55, and 0.03 μM , respectively (cf. Table 2).     

Insertion Reactions of Carbon Disulfide into Mg‐C and Mg‐N Bonds: Syntheses and Structural Determinations of Mg(S2CY)2(THF)n(Y=NEt2, NiPr2, iPr,Ph) and BrMg(S2CZ)(THF)3(Z=Ph,iPr)

The insertion reaction of CS₂ with Mg(NR₂)₂ (R= Et, ⁱPr), MgR′₂ (R′= Et, Ph) and R″MgBr (R″= ⁱPr, Ph) respectively lead solid products, Mg(S₂CNR₂)₂(THF)_n ( 1 : R= Et, n=2; 2 : R= ⁱPr, n=1), Mg(S₂C′R)₂(THF)₂ ( 3 : ′R= Et, 4 : ′R= Ph), BrMg(S₂C″R) (THF)₃ ( 5 : ″R= ⁱPr, 6 : ″R= Ph) in which the inserted carbon disulfides act as terminal chelating ligands. These compounds were characterized with ¹H, ¹³C NMR, IR spectroscopy, mass spectrometry, elemental analyses, and X‐ray crystallography.     

Hypoxanthine,xanthine and theobromine complexes with palladium(II) and platinum(IV) chlorides

Summary Complexes of the general types Pd(L)(LH)Cl (LH=hxH, xnH, or tbH) and Pt(L)(LH)Cl₃ (LH=hxH, or xnH) are formed by boiling under reflux 21 molar mixtures of hypoxanthine (hxH), xanthine (xnH) or theobromine (tbH) and PdCl₂ or PtCl₄ in ethanol-triethyl orthoformate. These complexes appear to be linear chain polymeric species, characterized by single monoanionic L^– ligands bridging between adjacent Pd²⁺ or Pt⁴⁺ ions. Inclusion of one terminal neutral LH and one terminal chloro-ligand completes the coordination sphere in the square-planar Pd²⁺ complexes, while the Pt⁴⁺ complexes aretrans-octahedral, involving three terminal chloro and one terminal LH ligand per platinum. The possible binding sites of the bidentate bridging L^– and the unidentate terminal LH are discussed.     

Hexaazatriphenylene-Based Two-Dimensional Conductive Covalent Organic Framework with Anisotropic Charge Transfer

The development of covalent organic frameworks (COFs) with efficient charge transport is of immense interest for applications in optoelectronic devices. To enhance COF charge transport properties, electroactive building blocks and dopants can be used to induce extended conduction channels. However, understanding their intricate interplay remains challenging. We designed and synthesized a tailor-made COF structure with electroactive hexaazatriphenylene (HAT) core units and planar dioxin (D) linkages, denoted as HD-COF. With the support of theoretical calculations, we found that the HAT units in the HD-COF induce strong, eclipsed π–π stacking. The unique stacking of HAT units and the weak in-plane conjugation of dioxin linkages leads to efficient anisotropic charge transport. We fabricated HD-COF films to minimize the grain boundary effect of bulk COFs, which resulted in enhanced conductivity. As a result, the HD-COF films showed an electrical conductivity as high as 1.25 S cm⁻¹ after doping with tris(4-bromophenyl)ammoniumyl hexachloroantimonate.     

Kinetic fluorometric FIA determination of total ascorbic acid, based on use of two serial injection valves

The kinetic determination of total ascorbic acid with a flow-injection analysis system is described. The sample is loaded into two serial sample injection valves and injected into a carrier system containing mercuric chloride and o-phenylenediamine. The formation of a fluorescent product is monitored. The single-point and double-point kinetic methods are compared by using both peak height and peak area as the analytical signal. A detection limit of 0.1 mu/ml for vitamin C was achieved with a sample throughput rate of 30 per hour.