ECG data compression with time-warped polynomials

Presents a new adaptive compression method for ECGs. The method represents each R-R interval by an optimally time-warped polynomial. It achieves a high-quality approximation at less than 250 bits/s. The author shows that the corresponding rates for other transform based schemes (the DCT and the DLT) are always higher. Also, the new method is less sensitive to errors in QRS detection and it removes more (white) noise from the signal. The reconstruction errors are distributed more uniformly in the new scheme and the peak error is usually lower. The reconstruction method is also useful for adaptive filtering of noisy ECG signals     

Reduced decoder complexity and latency in pixel-domain Wyner–Ziv video coders

In some video coding applications, it is desirable to reduce the complexity of the video encoder at the expense of a more complex decoder. Wyner–Ziv (WZ) video coding is a new paradigm that aims to achieve this. To allocate a proper number of bits to each frame, most WZ video coding algorithms use a feedback channel, which allows the decoder to request additional bits when needed. However, due to these multiple bit requests, the complexity and the latency of WZ video decoders increase massively. To overcome these problems, in this paper we propose a rate allocation (RA) algorithm for pixel-domain WZ video coders. This algorithm estimates at the encoder the number of bits needed for the decoding of every frame while still keeping the encoder complexity low. Experimental results show that, by using our RA algorithm, the number of bit requests over the feedback channel—and hence, the decoder complexity and the latency—are significantly reduced. Meanwhile, a very near-to-optimal rate-distortion performance is maintained. This work has been partially supported by the Spanish Ministry of Education and Science and the European Commission (FEDER) under grant TEC2005-07751-C02-01. A. Pižurica is a postdoctoral research fellow of FWO, Flanders.     

Characterisation of sol-gel prepared (HfO2)x(SiO2)1-x (x=0.1, 0.2 and 0.4) by 1H, 13C, 17 O and 29Si MAS NMR, FTIR and TGA

The HfO2-SiO2 system is attracting interest as a possible new dielectric material in semiconductor devices. Knowledge of the location of hafnium within the silica network and the effect hafnium has on the structure will be central to the successful use of this material system in this application. Here, sol-gel techniques have been used to manufacture (HfO2)x(SiO2)1-x samples (x=0.1, 0.2 and 0.4, each heat treated at 250, 500 and 750 degrees C) and these have been characterised by magic angle spinning (MAS) NMR (1H, 13C, 17 O, 29Si), Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis. 29Si MAS NMR showed that increasing the hafnia content decreases the connectivity of the silicate network, i.e. increases the range of differently connected SiO4 (Qn) units with more having increased numbers of non-bridging oxygens (i.e. lower n). FTIR and 17 O MAS NMR showed unequivocally that the x=0.4 sample phase-separated at higher temperatures, while in the x=0.1 sample the hafnium was homogeneously mixed into the SiO2 phase without any phase separation.     

A 3D Shape Measurement Technique that Makes Use of a Printed Line Pattern

The in-house validation of finite element models for bird strike events is currently carried out by means of experimental tests on flat plates. High displacement speeds in these experiments require a low exposure time of the high-speed camera (up to 1/50,000 s). In order to acquire images of sufficient quality, a special, high-intensity light source has to be used, which does not always turn out to be possible. Therefore, the regions with high displacement speeds often result in blurry images. In such cases, a printed line pattern to estimate the shape of the plate during the test, offers major advantages over a speckle pattern in terms of the reconstruction and optimization of the blurry regions. In this article, a stereo vision technique is presented that was developed to reconstructs 3D shape maps using images of impacted plates with printed line patterns. It is shown that two cameras are necessary to calculate accurate shape maps in case of large deflections. The resulting shapes can be used for the validation of numerical simulations.     

Mechanism for CuPt-type ordering in mixed III–V epitaxial layers

A model is proposed to rationalize the occurence of CuPt-type ordering in mixed III–V epitaxial layers grown on (001) substrates. It is invoked that 2× surface reconstruction occuring on group V terminated (001) surfaces produces dilated and compressed regions in sub-surface layers. The presence of these regions biases the occupation of certain sites during the growth of a layer consisting of atoms differing in their tetrahedral radii. By assuming that the reconstruction always occurs at the growing surface, it is possible to explain the evolution of CuPt-type ordering in epitaxial layers. Also, based on the model, experimental observations pertaining to the influence of growth conditions, surface misorientation and steps on ordering can be rationalized.     

Extractionsapparate

Ohne Zusammenfassung