Preconcentration of trace antimony in tap and sea water on activated alumina. Determination by graphite furnace atomic absorption spectrometry

Summary A method is described for antimony preconcentration based on retention on a column of activated alumina. Recovery is 80% when no pH-control and 4 mol/l HCl as eluent are used. The preconcentration factor is 400. The method was applied to the determination of antimony in spiked tap and sea water. The analytical performance of the method is discussed.     

Working Methods Paper: Critical considerations with respect to the identification of tin species in the environment

Biogeochemical pathways of tin species in the environment are still controversial, e.g. with regard to methylation and transmethylation phenomena, owing to the fact that the identification of methylated tin-compounds is often difficult. The previous tentative identification of a mixed methylbutyltin compound in sediment and biological samples by GC/AAS after hydride generation gave an illustration of this problem. This compound was previously identified in sediments by other authors and also suspected to occur in a contaminated sediment sample from the Boyardville Marina, France. The retention time obtained by GC/AAS corresponded to the actual retention time of a mixed methylbutyltin calibrant. However, additional checks demonstrated that the compound detected was actually monophenyltin. This evidence was produced by a thorough analysis of a selected sediment sample by alternative techniques such as GC/AAS and GC/AES after pentylation, GC/FPD and GC/MS. The results presented highlight the need for a full identification of compounds to avoid mis-interpretation.     

Influence of Al content x on hot electron noise in AlxGa1-xAs n+nn+ devices: comparison withGaAs

Hot electron noise measurements are performed in Si doped Al_x Ga_1-xAs n⁺nn⁺ devices, for three different Al concentrations: x=0.15, 0.2, 0.25. Noise temperatures are obtained using a pulsed measurement technique as functions of electric field and frequency. Longitudinal diffusion coefficients D(E) are deduced at 4 GHz. Results are analyzed through the scattering mechanisms which greatly affect the electron velocity properties of Al_xGa_1-xAs materials. Comparisons with n⁺ nn⁺ GaAs devices are made     

On the hot-carrier-induced post-stress interface trap generation inn-channel MOS transistors

A continued fast interface trap generation is observed in n-channel MOS transistors after termination of the hot-carrier stress. The magnitude of this post-stress effect is strongly dependent on the conditions of the preceding stress, on the post-stress conditions and on the process parameters. For measurements at 293 K, a simple model is proposed which is based on the release of hydrogen by the thermal detrapping of holes, and which can explain the observed dependencies. The importance of the post-stress D_it-generation is illustrated for the case of dynamic stress conditions where it can lead to an apparently deviating degradation behavior     

Surface losses in transmission lines

Two derivations of the loss parameter R, entirely from wave considerations in the presence of a metallic interface, are presented. R, which represents surface losses, occurs in transmission line equations for propagation of the voltage across the plates and of the current in the plates. Explanation of the surface losses involves some radiation of the interior fields into the metallic surfaces that absorb electromagnetic energy, and that ultimately convert it into ohmic losses (heat). Although the approach may restrict the derivation to a planar interface, i.e., to a parallel-plate transmission line, that restriction is not so essential that it cannot be softened     

Principles and recent developments in ultrasound contrast agents

The behaviour of gas bubbles and gas encapsulated spheres as echographic contrast agents is reviewed. Compared with rigid spheres, gas bubbles are superior scattering agents and they offer a number of useful properties which can be exploited in a variety of ways. The analysis of their velocity of sound, back-scatter intensity, second harmonic emission and resonant frequency opens up new perspectives in the development of contrast agents for echocardiographic research with potential clinical applications.     

Semiconductor waveguide directional couplers for coherent receivers

Optical waveguide 3-dB couplers integrated on semicondutors have been studied, designed and fabricated, using both bulk and diluted multi-quantum-well InGaAsP/InP-based materials, grown by MOCVD. The device structure is based on the two-mode interference (TMI) principle and is fully compatible for integration with the optoelectronic and electronic components of a coherent receiver. Bulk material couplers provide an output balanced within 0.05 dB per nanometer and an excess loss of 1.4 dB, compared to a straight guide, while coupling loss to a tapered-lensed single mode fibre is 4 dB.Improved coupling efficiency to single-mode fibres is achieved by use of moderately diluted multi-quantum-well waveguides, which include InGaAsP wells and InP barriers: coupling loss to a tapered-lensed single-mode fibre as low as 0.5 dB and excess loss of 1.8 dB are featured. Couplers fabricated with this waveguide structure have a balance sensitivity of 0.03 to 0.04 dB per nanometer.A moderately diluted multi-quantum-well 3-dB coupler has been permanently pigtailed and butt-coupled to a dual balanced PIN photoreceiver. This hybrid assembly was tested in a coherent transmission system at 155 and 622 Mbits^-1 showing sensitivities, for 10^-9 BER, of about-38.0 dBm and-28.8 dBm, respectively.     

Complex polymer architectures through dimethoxymethyl 1,1‐diphenylethylene derivatives

The reactions of polystyryllithium and potassium on dimethoxymethyl 1,1‐diphenylethylene derivatives were studied in different solvents. In a polar medium, A₃ and A₆ star types were formed according to the stoichiometry, whereas in a nonpolar medium, hyperbranched structures were synthesized. Extensions of an already proposed mechanism in polar and nonpolar media were examined. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3329–3335, 2003     

Tuning of 802.11e network parameters

This paper introduces a mechanism which dynamically tunes the parameters of the 802.11e contention-based access method. The proposed mechanism aims at providing QoS as well as ameliorating the problem of delay asymmetry.     

Immune-Inspired Adaptable Error Detection for Automated Teller Machines

This paper presents an immune-inspired adaptable error detection (AED) framework for automated teller machines (ATMs). This framework has two levels: one is local to a single ATM, while the other is network-wide. The framework employs vaccination and adaptability analogies of the immune system. For discriminating between normal and erroneous states, an immune-inspired one-class supervised algorithm was employed, which supports continual learning and adaptation. The effectiveness of the proposed approach was confirmed in terms of classification performance and impact on availability. The overall results are encouraging as the downtime of ATMs can de reduced by anticipating the occurrence of failures before they actually occur.