A new production method for carrier-free201Tl using IEN'S cyclotron in Rio De Janeiro

A new and simplified method was developed for the separation of thallium 201 which will allow the shipment of a “one shot generator” to distant places and easy elution at the destination. Thallium is produced as usually, through the reaction $${}^{nat}Tl/p,xn/^{201} pb\xrightarrow{{\beta ^ + }}{}^{201}Tl$$ with 24-MeV protons from IEN'S CV-28 cyclotron. The separation is based on the properties of a chelating carboxylic acid cation exchange resin column which at pH 4.5 retains lead while thallim is easily eluted. This column can also be used as a regular generator to produced greater quantities of²⁰¹Tl but at the expense of more elutions.     

Layer by layer buildup of polysaccharide films: physical chemistry and cellular adhesion aspects

The formation ofpolysaccharide films based on the alternate deposition of chitosan (CHI) and hyaluronan (HA) was investigated by several techniques. The multilayer buildup takes place in two stages: during the first stage, the surface is covered by isolated islets that grow and coalesce as the construction goes on. After several deposition steps, a continuous film is formed and the second stage of the buildup process takes place. The whole process is characterized by an exponential increase of the mass and thickness of the film with the number of deposition steps. This exponential growth mechanism is related to the ability of the polycation to diffuse "in" and "out" of the whole film at each deposition step. Using confocal laser microscopy and fluorescently labeled CHI, we show that such a diffusion behavior, already observed with poly(L-lysine) as a polycation, is also found with CHI, a polycation presenting a large persistence length. We also analyze the effect of the molecular weight (MW) of the diffusing polyelectrolyte (CHI) on the buildup process and observe a faster growth for low MW chitosan. The influence of the salt concentration during buildup is also investigated. Whereas the CHI/HA films grow rapidly at high salt concentration (0.15 M NaCl) with the formation of a uniform film after only a few deposition steps, it is very difficult to build the film at 10(-4) M NaCl. In this latter case, the deposited mass increases linearly with the number of deposition steps and the first deposition stage, where the surface is covered by islets, lasts at least up to 50 bilayer deposition steps. However, even at these low salt concentrations and in the islet configuration, CHI chains seem to diffuse in and out of the CHI/HA complexes. The linear mass increase of the film with the number of deposition steps despite the CHI diffusion is explained by a partial redissolution of the CHI/HA complexes forming the film during different steps of the buildup process. Finally, the uniform films built at high salt concentrations were also found to be chondrocyte resistant and, more interestingly, bacterial resistant. Therefore, the (CHI/HA) films may be used as an antimicrobial coating.     

Rapid determination of beta-aminoisobutyric acid by reversed-phase high-performance liquid chromatography

For the determination of beta-aminoisobutyric acid (BAIBA) in urine samples in which the beta-alanine concentrations are higher than those of BAIBA, the resolution between these two amino acids, separated by reversed-phase liquid chromatography on an octadecylsilane column, was optimized. The chromatographic analysis included precolumn derivatization of amino acids with o-phthalaldehyde, followed by a 15-min isocratic elution and detection at 340 nm. Because of its simplicity, this method should be useful for monitoring urinary excretion of BAIBA.     

The determination of chromium, copper and nickel in groundwater using axial plasma inductively coupled plasma atomic emission spectrometry and proportional correction matrix effect reduction

The performance of a proportional correction matrix effect reduction procedure was investigated for an axially viewed inductively coupled plasma. It was shown that the proportional correction factor (ratio of analyte matrix effect and internal standard matrix effect) was sufficiently stable over the investigated matrix element concentration ranges (0–2000 mg/L of Na and 0–400 mg/L of Ca) for the procedure to be successful. Proportional correction results in the best correction for matrix effects compared to the classical 1?:?1 intensity ratio correction procedure or the approach without any correction, as was shown in recovery experiments using analyte spiked groundwater samples. Matrix effects as high as 18% without correction were reduced to less than 4% applying proportional correction.     

New polythiophenes bearing electron-acceptor phthalocyanine chromophores

Two new donor-acceptor copolymers comprising a polythiophene backbone, and bearing phthalocyanine chromophores on the side chains have been prepared. Preliminary photophysical characterization of these materials by FTIR photoinduced absorption indicates that electron transfer from the polythiophene to the phthalocyanine units takes place.     

Unique structural properties of the Mg-Al hydrotalcite solid base catalyst: an in situ study using Mg and Al K-edge XAFS during calcination and rehydration

The changes in the layered structure of Mg-Al hydrotalcite (Mg/ Al = 2) during heat treatment have been investigated by using in situ XAFS simultaneously at the Mg and Al K-edges. The development of unique in situ instrumentation allowed the coordination environments at both the Mg and Al centers to be monitored as a function of the temperature and heat treatment. The results of this study show that the hydrotalcite structure is highly flexible, and should lead to the further development of hydrotalcites as new solid basic catalysts. Moreover, the Mg and Al cations in the cation layers show different behavior as a function of temperature. The coordination of some octahedral Al ions decreases already at a temperature of 425 K, whereas the coordination about Mg does not show any modification at this temperature. However, hydrotalcite treated at 425 K, followed by cooling down to room temperature resulted in a complete reversal to the original octahedral Al coordination. It is proposed that Al-OH bond breakage occurs at 425 K, without the evolution of H2O. This bond is restored after cooling to room temperature. The actual dehydroxylation of hydrotalcite commences between 425 and 475 K, as indicated by a change in coordination of both the Mg and Al centers. This is accompanied by the evolution of H2O molecules and the changes are hence irreversible without the presence of excess water. Heat treatment at 725 K leads to the development of an MgO-like phase (octahedral Mg) and a mixed octahedral/tetrahedral Al phase. A subsequent rehydration at room temperature entirely restores the original coordination about the Al and Mg centers of hydrotalcite to a distance of 15 A, to which XAFS spectroscopy is sensitive.     

Sodium diffusion through amorphous silica surfaces: a molecular dynamics study

We have studied the diffusion inside the silica network of sodium atoms initially located outside the surfaces of an amorphous silica film. We have focused our attention on structural and dynamical quantities, and we have found that the local environment of the sodium atoms is close to the local environment of the sodium atoms inside bulk sodo-silicate glasses obtained by quench. This is in agreement with recent experimental results.     

Physicochemical aspects of microbial adhesion — Influence of antibody adsorption on the deposition ofStreptococcus sobrinus in a parallel-plate flow chamber

Deposition of the oral bacteriumStreptococcus sobrinus HG977 onto glass (water contact angle 0°) and onto FEP-Teflon (fluoroethylenepropylene; water contact angle 110°) was studied in a parallel-plate flow chamber in the presence and absence of polyclonal antibodies (pAb) and monoclonal antibodies (mAbs) adsorbed onto the cells. The zeta potentials of the bacteria ranged from −7.1 to −8.5 mV at pH 6.8 and were not affected by the presence of pAb or mAbs. Hydrophobicity (by water contact angles) increased from 30° (no antibodies) to 88° in the presence of pAb adsorbed onto the bacterial cell surface. The untreatedS. sobrinus had a greater tendency to adhere to glass (44.5 × 10⁶ cm⁻²) than to FEP-Teflon (18.3 × 10⁶ cm⁻²), in accordance with thermodynamic modelling. After preincubation ofS. sobrinus with pAb, its clear preference for adhesion to glass disappeared as expected from its increased hydrophobicity. Although forS. sobrinus preincubated with OMVU10 no difference was found in hydrophobicity in comparison to the untreated bacteria, the number of bacteria adhering to glass decreased to 10.2 ¢ 10⁶ cm⁻². Formation of bacterial aggregates was found whenS. sobrinus, preincubated with pAb or OMVU10, adhered to glass and FEP. This was also observed when untreated bacteria adhered to glass coated with OMVU10, or to FEP coaled with OMVU10 or pAb. Adhesion in these experiments is therefore thought to occur via near-neighbour collection induced by the presence of pAb or mAbs. Low numbers of bacteria were removed from glass after draining the flow cell, whereas high numbers of untreated bacteria and bacteria preincubated with OMVU10 were removed from FEP.S. sobrinus cells preincubated with pAb were not removed but piled up. It was concluded that the adhesion of untreatedS. sobrinus andS. sobrinus preincubated with pAb is in accordance with thermodynamic modelling, based on the overall wettability of the cell surfaces, whereas the adhesion ofS. sobrinus preincubated with OMVU10 may be through localized interactions, not expressed in overall surface properties.     

A dedicated NAA method to determine the neutron spectrum monitor elements Co,Au and Lu with high accuracy in alloyed wires and foils

A dedicated NAA calibration method was developed for the determination of the neutron spectrum monitor elements Co, Au and Lu in alloyed wires and foils, with an accuracy of better than 1%. The method does not require quantitative micropipetting for preparing the standards, and leads to vanishing errors caused by flux inhomogeneities and by differences in counting geometry and gamma attenuation. Its performance was tested by analysing various NIST, IRMM and RX aluminium-based materials with certified or specified Co, Au or Lu content.