Energy dependence of the epithermal neutron spectrum shape parameter α with respect to application of comparator-type NAA

The epithermal neutron spectrum shape parameter in nuclear reactors is explained from a theoretical point of view in terms of the neutron slowing down density function. The latter is approximated by Fermi's age theory. Values for are calculated for a simple approximation of a nuclear reactor: a disk shaped fission neutron source in an infinite graphite moderator. The model produces -values with the correct sign and magnitude, compared to experimental values from the literature, determined in a real reactor. It is shown that varies strongly with distance to the neutron source and less strongly with neutron energy. The inappropriateness of average -values, obtained from the slope of quasi-straight lines produced by log-log plots of E^– versus E, for the correction of non-ideal epithermal neutron activation is discussed. Conclusions are formulated concerning the impact of an energy dependent on comparator type NAA.     

Defect concentration in Ti-substituted YIG from TG curves

The article discusses theory and experiment about the measurement of defect concentration in Ti-substituted yttrium iron garnet by means of thermogravimetry techniques. The two possible cases arising from oxygen interchange with atmosphere, oxygen vacancies and interstitial cations, may be analyzed quantitatively from the derived expressions. The possibility of another type of defects being present in the samples, not associated to oxygen evolution, is not excluded. Measurements were carried out in air and CO₂ for different Ti contents. The substitution tends to increase slightly the defect parameter θ in YIG, while a CO₂ reducing atmosphere is much more effective than the Ti substitution for increasing θ. Calculations for a given single-phased sample sintered in air show two possibilities: a deficit of one oxygen atom for every 2.5 unit cells of 96 atoms, or one excess cation for every 3.5 cells. Other samples show very similar results. The accuracy involved in the measurements is about 2–3%.     

Attenuated Total Reflection-Fourier transform infrared analysis of the fermentation process of pineapple

A direct and reagent free procedure has been developed to monitor the fermentation process of pine apple nectar using Attenuated Total Reflectance Fourier-transform mid-infrared spectrometry (FT-IR) and multivariate analysis. A classical 4² design for standards was employed for calibration using the information in the spectral range from 907 to 1531 cm⁻¹ of the first order derivative spectra after mean centering of infrared data. The root mean square error of calibration (RMSEC) of 0.040, 0.021, 0.063 and 0.074% w/w were obtained for glucose, fructose, saccharose and ethanol, respectively, and a mean relative validation error of 2.9, 2.1, 2.6 and 3.6% was achieved for glucose, fructose, saccharose and ethanol. Results obtained by the proposed procedure for the alcohol content at different fermentation levels were statistically comparable with those obtained by a reference spectrometric method. So, FT-IR spectrometry provides a fast alternative to long and tedious classical procedures to ethanol determination and sugar enzymatic analysis.     

Evaluation of a purge-and-trap injection system for capillary gas chromatography-microwave induced plasma-atomic emission spectrometry for the determination of volatile selenium compounds in water

A method is presented for the selective determination of the volatile selenium species dimethylselenide and dimethyldiselenide, using a commercially available purge-and-trap injection system coupled to capillary gas chromatography-microwave induced plasma-atomic emission spectrometry. The efficiency of the purging step was evaluated and the parameters affecting the purge and trap processes were optimized. The method was applied to the determination of volatile selenium compounds in lake water. Relative detection limits of 2ng/l for dimethylselenide and dimethyldiselenide, corresponding to an absolute detection limit of 10 pg, were achieved.     

Fe（Ⅲ）－TEA－5－Br－PADAP－H_2O_2体系中催化波的研究及其应

在０．２ｍｏｌ·Ｌ￣（－１）ＮＨ＿４Ｃｌ－ＮＨ＿３·Ｈ＿２Ｏ底液中，（ｐＨ为９．２６），得到一个极为灵敏的Ｆｅ（Ⅲ）－ＴＥＡ－５－Ｂｒ－ＰＡＤＡＰ－Ｈ＿２Ｏ＿２配合吸附催化波，其峰电位为－０．７１Ｖ（ｖｓ．ＳＣＥ）。铁浓度在１．８×１０￣（－１０）～５．４×１０￣（－６）ｍｏｌ·Ｌ￣（－１）范围内与二阶导数波高呈线性关系。对该极谱波的性质进行了研究，证明是一种配合吸附催化波，并成功地应用于各类水样，钒催化剂中微量或痕量铁的测定。     

The application of chromatography to the analysis of pharmaceutical creams

Summary The application of GLC, HPLC and TLC to the analysis of pharmaceutical creams is discussed with special attention to sample clean-up. The results of the determination of hydrocortisone acetate, salicylic acid, benzoic acid, diethyl stilbestrol, chloramphenicol, diphenhydramine HCl, tretinoin and some cream base components by reversed phase HPLC are given.Presented at the 14th International Symposium on Chromatography London, September, 1982     

Thermal study of CoxZn7-xSb2O12 spinel obtained by pechini method using different alcohols

With the aim of obtaining materials with applications in pigments, Co_xZn_7-xSb₂O₁₂ spinels were synthesized using the Pechini method. This method consists in the formation of a polymeric net, where the metallic cations are homogeneously distributed. In this work, two types of alcohol (ethyl glycol and ethylene glycol) were used for the synthesis of a zinc antimoniate spinel, Co_xZn_7-xSb₂O₁₂ (x=0-7). The materials were characterized by termogravimetry (TG) and differential thermal analysis (DTA). TG results indicated a decrease in total mass loss when cobalt was added to the solution substituting zinc, for samples prepared using the two different alcohols. Decomposition temperatures, obtained by TG and DTA, presented a decreasing behavior as cobalt was added to the material. In relation to the alcohols, all results indicated a better polymerization of the resin when ethylene glycol was used, being the most indicated one for cation immobilization. X-ray diffraction did not show differences between the two alcohols - both presented the spinel phase (Co, Zn)_2.33Sb₀.₆₇O₄. Samples with higher quantity of cobalt also presented ilmenite phase (Co, Zn)Sb₂O₆. This revised version was published online in August 2006 with corrections to the Cover Date.