MECHANISM OF PHOTOREDUCTION OF THIAZINE DYES BY EDTA STUDIED BY FLASH PHOTOLYSIS-II. pH DEPENDENCE OF ELECTRON ABSTRACTION RATE CONSTANT OF THE DYES IN THEIR TRIPLET STATE

Abstract— The pH dependence of the apparent reactivity of thiazine dyes in their triplet states has been studied in aqueous solutions, using as electron donor HY^-3, the trianionic species of ethylene diamine tetraacetic acid (EDTA), in the pH range 4–8. The pH dependence is found to be related to a change in the degree of protonation of the triplet excited dye. The apparent reactivity and lifetime of two differently protonated forms of thionine, azur B and methylene blue were determined by classical and dye-laser flash techniques, making it possible to evaluate the rate constant for electron abstraction of these molecules in their triplet states. It is found that: (a) protonation on the ring nitrogen increases the electron-abstraction rate constant of the triplet-state species about twenty-fold, and (b) methylation on the side amino groups decreases it.     

A vibrational molecular force field of model compounds with biological interest. I. Harmonic dynamics of crystalline urea at 123 K

Normal coordinate calculations have been performed for urea and deuterated urea in the crystalline state. We have used the modified Urey–Bradley–Shimanouchi intramolecular potential energy function and a rather sophisticated intermolecular energy function to reproduce I.R. and Raman frequencies with an average error of 2 cm^–1. The general agreement between the calculation and experiment suggests that intermolecular interactions must be taken into account to determine reliable intramolecular parameters of the potential energy function, mainly the barrier to internal rotation around the C? N bond. The intermolecular energy function, which consists of the Buckingham function and an explicit harmonic function for hydrogen-bonding, then has the merit to reproduce quite well the observed frequencies of lattice vibrations.     

Enantioselective Diels-Alder reactions with N-hydroxy-N-phenylacrylamide

[reaction: see text] The use of hydroxamic acids as templates for Lewis acid catalyzed enantioselective Diels-Alder reactions has been examined. A very simple chiral Lewis acid, prepared by mixing optically pure binaphthol with 3 equiv of trimethylaluminum, catalyzes the [4 + 2] cycloaddition of N-hydroxy-N-phenylacrylamide with cyclopentadiene at 0 degrees C in high yield (>96%) and with a fairly good level of enantioselectivity (91% ee). Facile conversion of the products to the corresponding alcohols or aldehydes makes the hydroxamic acid intermediates particularly useful.     

Polyelectrolyte multilayers and degradable polymer layers as multicompartment films

Polyelectrolyte multilayers are now a well established concept with numerous potential applications in particular as biomaterial coatings. To timely control the biological activity of cells in contact with a substrate, multicompartment films made of different polyelectrolyte multilayers deposited sequentially on the solid substrate constitute a promising new approach. In a first paper (Langmuir 2004, 20, 7298) we showed that such multicompartment films can be designed by alternating exponentially growing polyelectrolyte multilayers acting as reservoirs and linearly growing ones acting as barriers. In the present study, we first demonstrate however that these barriers composed of synthetic polyelectrolytes are not degraded despite the presence of phagocytic cells. We propose an alternative approach where exponentially growing poly(L-lysine)/hyaluronic acid (PLL/HA) multilayers, used as reservoirs, are alternated with biodegradable polymer layers consisting in poly(lactic-co-glycolic acid) (PLGA) and acting as barriers for PLL chains that diffuse within the PLL/HA reservoirs. We first show that these PLGA layers can be deposited alternatively with PLL/HA multilayers leading to polyelectrolyte multilayer/hydrolyzable polymeric layer films and acting as a reservoirs/barriers system. Bone marrow cells seeded on these films ending by a PLL/HA reservoir rapidly degrade it and internalize the PLL chains confined in this reservoir. Then the cells degraded locally the PLGA barrier and internalize the PLL localized in a lower (PLL/HA) compartment after 5 days of seeding. By changing the thickness of the PLGA layer, we hope to be able to tune the time delay of degradation. Such mixed architectures made of polyelectrolyte multilayers and hydrolyzable polymeric layers could act as coatings allowing us to induce a time scheduled cascade of biological activities. We are currently working on the use of comparable films with compartments filled by proteins or peptides and in which the degradation of the barriers results from a hydrolysis over tunable time scales.     

Synthesis of models of metabolites: Oxidation of variously substituted chromenes including acronycine,by a porphyrin catalytic system

The influence of chemical neighbouring on oxidation of substituted 2,2‐dimethylchromenes derivatives 5‐8 by a biomimetic catalytic system was first studied. It was then applied to acronycine an anti‐cancer drug in order to obtain in one single step oxidized products resulting from the reactivity of the 1,2‐double bond in the pyranic D‐ring. These 2,2‐dimethylchromenes constitute the structural moiety responsible for the activity of acronycine. This oxidation showed the sensitivity of the ethylenic bond, leading to the formation of the corresponding epoxides, diols and/or ketoalcohol. In the case of 5‐dimethylamino‐2,2‐dimethylchromene 8 , the double bond was not sensitive to oxidation, but the N‐methyl groups reacted to lead to the formamide derivative 16 and an imino‐alcohol 17 . This methodology applied to acronycine molecule 1 , allowed to obtain in one step, two oxidized compounds, a trans‐diol 3 and a ketoalcohol 4 under preparative conditions.     

Layer by layer buildup of polysaccharide films: physical chemistry and cellular adhesion aspects

The formation ofpolysaccharide films based on the alternate deposition of chitosan (CHI) and hyaluronan (HA) was investigated by several techniques. The multilayer buildup takes place in two stages: during the first stage, the surface is covered by isolated islets that grow and coalesce as the construction goes on. After several deposition steps, a continuous film is formed and the second stage of the buildup process takes place. The whole process is characterized by an exponential increase of the mass and thickness of the film with the number of deposition steps. This exponential growth mechanism is related to the ability of the polycation to diffuse "in" and "out" of the whole film at each deposition step. Using confocal laser microscopy and fluorescently labeled CHI, we show that such a diffusion behavior, already observed with poly(L-lysine) as a polycation, is also found with CHI, a polycation presenting a large persistence length. We also analyze the effect of the molecular weight (MW) of the diffusing polyelectrolyte (CHI) on the buildup process and observe a faster growth for low MW chitosan. The influence of the salt concentration during buildup is also investigated. Whereas the CHI/HA films grow rapidly at high salt concentration (0.15 M NaCl) with the formation of a uniform film after only a few deposition steps, it is very difficult to build the film at 10(-4) M NaCl. In this latter case, the deposited mass increases linearly with the number of deposition steps and the first deposition stage, where the surface is covered by islets, lasts at least up to 50 bilayer deposition steps. However, even at these low salt concentrations and in the islet configuration, CHI chains seem to diffuse in and out of the CHI/HA complexes. The linear mass increase of the film with the number of deposition steps despite the CHI diffusion is explained by a partial redissolution of the CHI/HA complexes forming the film during different steps of the buildup process. Finally, the uniform films built at high salt concentrations were also found to be chondrocyte resistant and, more interestingly, bacterial resistant. Therefore, the (CHI/HA) films may be used as an antimicrobial coating.     

Sodium diffusion through amorphous silica surfaces: a molecular dynamics study

We have studied the diffusion inside the silica network of sodium atoms initially located outside the surfaces of an amorphous silica film. We have focused our attention on structural and dynamical quantities, and we have found that the local environment of the sodium atoms is close to the local environment of the sodium atoms inside bulk sodo-silicate glasses obtained by quench. This is in agreement with recent experimental results.     

Agglomération contrôlée de latex par formation de complexes tensioactifs anioniques : copolymères à blocs à base de poly(oxyde d’éthylène)

For polystyrene–poly(ethylene oxide) (PS–PEO) diblock copolymers, as micellar dispersions in aqueous medium, the formation of complexes with anionic surfactants, such as sodium dodecylsulfate (SDS) could be confirmed. The number of SDS molecules fixed per EO unit is close to the values reported for the SDS–PEO homopolymer interaction. Advantage of this type of complexation was taken to develop a controlled agglomeration process for SDS stabilized PS and PVC latexes by using as agglomerants ‘hairy’ latexes of PS and PVC that have been synthesized in the presence of PS–PEO block copolymers and that carry therefore a fringe of PEO sequences on their surface. The complexation of SDS by these surface-anchored PEO chains leads to the destabilization of the anionic latex, which has a tendency to precipitate onto the surface of the agglomerant latex. The average particle size and the size distribution of the agglomerated particles were studied as a function of the weight and number ratio of the two types of latexes involved in the agglomeration process, as well as in function of the surface coverage by SDS and PEO respectively. By adjusting these parameters, it was possible to obtain, with an efficiency of almost 100%, latex agglomerates with a monomodal distribution in the size range of 1 to 40 μm. An agglomeration mechanism could be outlined taking into account the complexation capacity and the specific surface of the agglomerating ‘hairy’ latex. To cite this article: P. Peter et al., C. R. Chimie 6 (2003).     

Spontaneous dissolution of a single-wall carbon nanotube salt

Upon reduction with alkali metals, single-wall carbon nanotubes (SWNTS) are shown to form polyelectrolyte salts that are soluble in polar organic solvents without any sonication, use of surfactants, or functionalization whatsoever, thus forming true thermodynamically stable solutions of naked SWNTs.     

Conduction in charged PbSe nanocrystal films

Conduction in thin films of PbSe nanocrystals doped by electrochemical gating has been studied. Charging the film, with either electrons or holes, increases the conductance by orders of magnitude. The electrons in the 1S(e) state of nanocrystals in these films have a mobility as high as 5.0 x 10(-3) cm(2) V(-1) s(-1). Electrons in the 1P(e) state were found to have a differential mobility up to 3-5 times greater than the electrons in the 1S(e) state, and a mobility minima was found corresponding to the complete filling of the 1S(e) state. The temperature and electric field dependence of conductance in the film, measured between 4.3 and 135 K, were both well described by a variable range hopping model.