Stability of Plasma Treated Non-vulcanized Polybutadiene Surfaces: Role of Plasma Parameters and Influence of Additives

Surface modification studies of non-vulcanized BR elastomers (butadiene rubber) by low-pressure air plasma treatment and the effect on ageing and adhesion performances are presented in this paper. In particular, the influence of discharge power and distance from the glow discharge, and impact of antioxidant molecules in the BR formulation were examined. To characterize the changes to the BR surface, XPS spectroscopy, contact angle measurements, AFM nanoindentation experiments and tack measurements were utilized. Oxidation and crosslinking were the main mechanisms observed on the polymer chains regardless of the plasma conditions used. Beyond a certain threshold of plasma energy (in our case, discharge power of ~60 W and exposure time of ~30 s), a steady state was reached irrespective of the distance from the glow discharge. The presence of antioxidant molecules considerably reduced crosslinking phenomena while maintaining oxidation processes on polymer chains and increasing the nitrogen content in the near surface region. The mechanisms responsible for these differences have been identified. Interestingly, the COOH/C=O ratio changed according to the balance between oxidation and crosslinking. The hydrophobic recovery rate was mainly driven by temperature-dependent dynamics and varied according to the degree of crosslinking in the surface region. It was found to be lower in air atmosphere in the presence of antioxidant molecules. Finally, the presence of antioxidant molecules in the BR formulation allowed the adhesion performances after plasma exposure to significantly increase.     

Orbitals and the Interpretation of Photoelectron Spectroscopy and (e,2e) Ionization Experiments

Electron momentum spectroscopy, scanning tunneling microscopy, and photoelectron spectroscopy provide unique information about electronic structure, but their interpretation has been controversial. This essay discusses a framework for interpretation. Although this interpretation is not new, we believe it is important to present this framework in light of recent publications. The key point is that these experiments provide information about how the electron distribution changes upon ionization, not how electrons behave in the pre‐ionized state. Therefore, these experiments do not lead to a “selection of the correct orbitals” in chemistry and do not overturn the well‐known conclusion that both delocalized molecular orbitals and localized molecular orbitals are useful for interpreting chemical structure and dynamics. The two types of orbitals can produce identical total molecular electron densities and therefore molecular properties. Different types of orbitals are useful for different purposes.     

Convenient and easy access to 2-hydroxycyclopent-2-enones from acylcyanohydrins

A convenient access to 2-hydroxycyclopentenones was designed from acylcyanohydrins, by using titanacyclopropane complexes as nucleophilic partners and an intramolecular aldol condensation in basic conditions. The development of a one-pot procedure allows a step- and atom-economic process, and the use of Grignard reagents other than ethylmagnesium bromide provided valuable 3,4-disubstituted 2-hydroxycyclopentenones. The utility of the hydroxy group was illustrated by further functionalization of the α-position using palladium-mediated cross-coupling reactions.     

Enantio- and diastereoselective synthesis of (E)-1,5-syn-diols: application to the synthesis of the C(23)-C(40) fragment of tetrafibricin

A highly stereoselective synthesis of (E)-1,5-syn-diols 6 is described. The kinetically controlled hydroboration of allenyltrifluoroborate 8 with Soderquist borane 2 provides the (Z)-allylic trifluoroborate 9, which undergoes sequential allylboration with two different aldehydes to provide (E)-1,5-syn-diols 6 in 72-98% yields with >95% ee and >20:1 dr. Application of this method to the synthesis of the tetrafibricin C(23)-C(40) fragment 19 is described.     

One-pot microwave-assisted substitution of a glucuronan trisaccharide

Substitution of a glucuronic acid trisaccharide was easily performed in one step under microwave irradiation, affording a product resulting from simultaneous glycosylation, esterification and a butyl ether formation.     

A vibrational molecular force field of model compounds with biological interest. I. Harmonic dynamics of crystalline urea at 123 K

Normal coordinate calculations have been performed for urea and deuterated urea in the crystalline state. We have used the modified Urey–Bradley–Shimanouchi intramolecular potential energy function and a rather sophisticated intermolecular energy function to reproduce I.R. and Raman frequencies with an average error of 2 cm^–1. The general agreement between the calculation and experiment suggests that intermolecular interactions must be taken into account to determine reliable intramolecular parameters of the potential energy function, mainly the barrier to internal rotation around the C? N bond. The intermolecular energy function, which consists of the Buckingham function and an explicit harmonic function for hydrogen-bonding, then has the merit to reproduce quite well the observed frequencies of lattice vibrations.     

How Carbon Nanotube Crushing can Improve Flame Retardant Behaviour in Polymer Nanocomposites?

Nanocomposites based on an ethylene–vinyl acetate copolymer (27 wt.‐% vinyl acetate) and multiwall carbon nanotubes (MWNTs) have been prepared by melt blending and their thermal degradation and flame retardant properties have been evaluated. Special attention has been paid to the influence of the nanotube nature on the flammability properties and more particularly on the time to ignition (TTI) as measured by cone calorimetry. It has been shown that there is a strong influence of the nature of carbon nanotubes on the fire behaviour of the composites, especially previous MWNTs crushing proved to substantially delay the TTI while maintaining much reduced heat release rate (HRR). Such a remarkable behaviour might be explained by the chemical reactivity of radical species present at the surface/extremities of crushed MWNTs during the combustion process.

     

Polymer microfluidic chips for electrochemical and biochemical analyses

Our recent developments concerning the fabrication of polymer microchips and their applications for biochemical analyses are reviewed. We first describe two methods of fabrication of polymer microfluidic chips, namely UV-laser photoablation and plasma etching that are well suited for the prototyping and mass fabrication of microchannel networks with integrated microelectrodes. These microanalytical systems can be coupled with various detection means including mass spectrometry, and their applications in capillary electrophoresis are presented here. We also present how UV laser photoablation can be used for the patterning of biomolecules on polymer surfaces for generating two-dimensional arrays of microspots to carry out affinity assays. Finally, the use of the microchips for the development of fast affinity and immunological assays with electrochemical detection is presented, demonstrating the potential of these polymer microchips for medical diagnostics and drug discovery.     

Vinyl nosylates as partner in copper and silver co-catalyzed Sonogashira cross-coupling reactions

Vinyl nosylates, readily obtained from β-dicarbonyl derivatives, could be efficiently engaged in Sonogashira cross-coupling reactions, either cocatalyzed by copper or silver salts. The para-nitrobenzenesulfonate (nosylate) group allows this coupling to be performed under very mild conditions (room temperature). These new leaving group and mild conditions could be applied to the synthesis of acetylenic coumarinyl derivatives and to the total synthesis of an acetylenic monoterpene natural product, named cleviolide.     

hcp‐Co Nanowires Grown on Metallic Foams as Catalysts for Fischer–Tropsch Synthesis

The Fischer–Tropsch synthesis (FTS) is a structure‐sensitive exothermic reaction that enables catalytic transformation of syngas to high quality liquid fuels. Now, monolithic cobalt‐based heterogeneous catalysts were elaborated through a wet chemistry approach that allows control over nanocrystal shape and crystallographic phase, while at the same time enables heat management. Copper and nickel foams have been employed as supports for the epitaxial growth of hcp‐Co nanowires directly from a solution containing a coordination compound of cobalt and stabilizing ligands. The Co/Cu_foam catalyst was tested for Fischer–Tropsch synthesis in a fixed‐bed reactor, showing stability and significantly superior activity and selectivity towards C5+ compared to a Co/SiO₂‐Al₂O₃ reference catalyst under the same conditions.