ansa-Metallocene derivatives XXXIII. 2-Dimethylamino-substituted bis-indenyl zirconium dichloride complexes with and without a dimethylsilyl bridge: syntheses, crystal structures and properties in propene polymerization catalysis

Bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (2-(CH₃)₂N-C₉H₆)₂ZrCl₂, and dimethylsilyl-bridged bis(2-N,N-dimethylamino-indenyl) zirconium dichloride, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂, were prepared by reaction of the corresponding ligand lithium salts with ZrCl₄ in toluene. Diffractometric structure determinations reveal C₂-symmetric complex geometries for both complexes. An increased electron density at the Zr center of the dimethylamino-substituted complexes is indicated by reduction potentials which are 0.3–0.4 V more negative than those of their unsubstituted analogs. When activated with methyl aluminoxane in toluene solution, (CH₃)₂Si(2-(CH₃)₂N-C₉H₅)₂ZrCl₂ catalyzes the polymerization of propene to polymers with a microstructure comparable with that of polymers produced with other Me₂Si-bridged bis(indenyl)ZrCl₂ complexes, but with a substantially increased fraction of i-propyl end groups derived from alkyl exchange between Zr-polymer and Al---Me species.     

Intramolecular metal—double bond interactions : VII. Intramolecular cyclization of alkenyl derivatives of lithium,aluminum, gallium and indium

The intramolecular cyclization reactions of tri-1-hex-5-enyl Group III derivatives and of 1-hex-5-enyllithium have been investigated and it is proposed that the reactions may be depicted as internal addition across the terminal double bonds of the alkenyl species. The cyclization reaction proceeds more readily for the 1-hex-5-enyl derivatives than for any other chain length and is dependent on temperature, concentration and solvent. ¹H NMR data and cryoscopic molecular weight data are presented for several diisobutyialkenyl- and diisobutylalkyl-aluminum derivatives. These data have been interpreted in terms of a direct intramolecular interaction between the metal center and the π-electron system of the olefinic site. The intramolecular cyclization reactions for the 1-hept-6-enyl, 1-oct-7-enyl- and 1-undec-10-enylaluminum derivatives also were investigated and it was found that cyclization occurred only for the 1-hept-6-enyl derivative.     

Development of a multiplex microarray microsystem

A hybrid multiplex microarray microsystem has been developed that consists of 32 individually addressable array reaction chambers, supporting the use of multichannel pipettes for addition of up to 8 samples simultaneously. Discrimination between Campylobacter jejuni and Campylobacter coli bacteria was observed in DNA samples containing Campylobacter spp., with the same specificity and sensitivity as when compared to a full-size microarray. The spinloaded multiplex microarray microsystem described provides a novel and convenient test format for simultaneous low-density microarray analysis and is universally adaptable to other DNA, protein or small molecule microarray based applications.     

Concise total syntheses of the bioactive mesotricyclic diterpenoids jatrophatrione and citlalitrione

The highly functionalized [5.9.5] tricyclic framework resident in jatrophatrione (1) and citlalitrione (2) has been synthesized. The route begins with the tandem anionic oxy-Cope rearrangement/methylation/transannular ene cyclization of 21 and subsequent introduction of a conjugated enone double bond. Hydroxyl-directed 1,4-reduction of this functionality in 25 with LiAlH(4)/CuI/hexamethylphosphoramide/tetrahydrofuran sets the stage for the implementation of a Grob fragmentation and expedited generation of 27. Stereocontrolled intramolecular hydrosilylation allows for the subsequent introduction of a cyclic carbonate as in 53. This intermediate undergoes remarkably efficient, fully regiocontrolled Treibs reaction to generate 54, with this maneuver serving as a pivotal step for making 1 available five steps later. Treatment of 1 with m-chloroperbenzoic acid leads to 2, with attack occurring preferentially on a alpha-face of the double bond more remote to the carbonyl.     

A new class of C1-symmetric monosulfoximine ligands for enantioselective hetero Diels-Alder reactions

Quinoline-based C1-symmetric sulfoximines have been used as chiral ligands in copper-catalyzed asymmetric hetero Diels-Alder reactions leading to cycloadducts with up to 96% ee.     

Synthesis of light-sensitive arenesulfonylazido polycarboxylic acids

Several light-sensitive arenesulfonylazido polycarboxylic acids were synthesized by a one-step reaction of a polymeric anhydride with a light-sensitive monofunctional alcohol, or by the reverse reaction, i.e., reaction of a polymeric alcohol with a light-sensitive monofunctional anhydride. The polycarboxylic acids are soluble in polar organic solvents and in aqueous base. Neutralization of part of the carboxyl groups gives rise to the formation of water-soluble polymers. Coreaction of poly(maleic anhydride-co-methyl vinyl ether) with 2-hydroxyethyl 4-sulfonylazidocarbanilate and 2-hydroxyethyl trans-2,5-dimethoxystilbene-4′-carbamate produces a light-sensitive polycarboxylic acid with “built-in” sensitizer.     

Influence of initial oxygen coverage and magnetic moment on the NO decomposition on rhodium (111)

In this study, density functional theory calculations were performed to investigate the influence of oxygen preoccupation on the nitrogen oxide decomposition on rhodium. Besides gauging the coverage dependence of the adsorption energy of NO on the (111) rhodium facet, the influence of the initial oxygen coverage on the kinetics and thermodynamics of the nitrogen oxide decomposition reaction was also studied. The results are discussed with respect to a novel NOx decomposition catalyst. Furthermore, the influence of spin effects on the adsorption geometry as well as the adsorption energy is examined. It will be addressed why spin effects only have a minor influence on the behavior of NO on a rhodium surface.     

Screening,library-assisted identification and validated quantification of fifteen neuroleptics and three of their metabolites in plasma by liquid chromatography/mass spectrometry with atmospheric pressure chemical ionization

A liquid chromatographic/mass spectrometric assay with atmospheric pressure chemical ionization (APCI-LC/MS) is presented for the fast and reliable screening and identification and for the precise and sensitive quantification of 15 neuroleptic (antipsychotic) drugs and three of their relevant metabolites in plasma. It allows confirmation of the diagnosis of a neuroleptic overdose and monitoring of psychiatric patients' compliance. The neuroleptics amisulpride, bromperidol, clozapine, droperidol, flupenthixol, fluphenazine, haloperidol, melperone, olanzapine, perazine, pimozide, risperidone, sulpiride, zotepine and zuclopenthixol and the pharmacologically active metabolites norclozapine, clozapine N-oxide and 9-hydroxyrisperidone were extracted from plasma using solid-phase extraction and were separated on a Merck LiChroCART column with Superspher 60 RP Select B as the stationary phase. Gradient elution was performed using aqueous ammonium formate and acetonitrile. After screening and identification in the scan mode using the authors' new LC/MS library, the neuroleptics were quantified in the selected-ion mode. The quantification assay was fully validated. It was found to be selective and proved to be linear from sub-therapeutic to over therapeutic concentrations for all analytes. The corresponding reference levels are listed. The accuracy and precision data were within the required limits. The analytes were stable in frozen plasma for at least 1 month. The method was successfully applied to several authentic plasma samples from patients treated or intoxicated with various neuroleptics. The validated LC/MS assay has proved to be appropriate for the isolation, separation, screening, identification and quantification of various neuroleptics in plasma for clinical toxicology and therapeutic drug monitoring purposes.     

Thermochemistry of adducts of some bivalent transition metal bromides with 4-chloroaniline

The compounds [MBr₂(p-clan)₂] (where M is Mn(II), Fe(II), Co(II), Ni(II), Cu(II) or Zn(II); p-clan = 4-chloroaniline) were synthesized and characterized by melting points, elemental analysis, thermal analysis and electronic and IR spectroscopy. The enthalpies of solution of the adducts, metal(II) bromides and 4-chloroaniline in methanol, 1.2 M aqueous HCl or 25% (v/v) 1.2 M aqueous HCl in methanol were measures and by using thermochemical cycles, the following thermochemical parameters for the adducts have been determined: the standard enthalpies for the Lewis acid/base reactions (Δ_rH°), the standard enthalpies of formation (Δ_fH°), the standard enthalpies of decomposition (Δ_DH°), the lattice standard enthalpies (Δ_MH°) and the standard enthalpies of the Lewis acid/base reactions in the gaseous phase (Δ_rH°(g)). The mean bond dissociation enthalpies of the metal(II)-nitrogen coordinated bonds and the enthalpies of adduct formation in the gaseous phase have been estimated.     

Drying and pyrolysis of wood particles: experiments and simulation

The objective of this study is to develop a flexible and stable numerical method to predict the thermal decomposition of large wood particles due to drying and pyrolysis. At a later stage, this model is applied to each particle of a packed bed and thus, forms the entire packed bed process as a sum of individual particle processes. Therefore, this approach can deal with particles of different sizes, shapes and properties. A general formulation of the conservation equations allows the geometry of a fuel particle to be treated as a plate, cylinder or sphere. The various processes such as heat-up, drying and pyrolysis are described by a set of one-dimensional and transient conservation equations for mass and energy. This allows for simultaneous processes e.g. reactions in time and covers the entire range between transport-limited (shrinking core) and kinetically limited (reacting core) reaction regimes. The particles interact with a gas phase by heat and mass transfer taking into account the Stefan correction due to the gas outflow during conversion. Experiments carried out span a temperature range between T=300 and 900 °C for particle sizes varying between 8 and 17 mm. A comparison between measurements and predictions of drying models yielded satisfactory agreement only for the constant evaporation temperature model and thus, indicating, that the drying process is transport limited by heat transfer for large wood particles. Likewise, predicted results of pyrolysis for the above-mentioned range of temperatures and sizes agreed satisfactorily with measurements.