The influence of hard‐segments on two‐phase structure and shape memory properties of PCL‐based segmented polyurethanes

Poly(ε‐caprolactone)‐based segmented polyurethanes (PCLUs) were prepared from poly(ε‐caprolactone) diol, diisocyanates (DI), and 1,4‐butanediol. The DIs used were 4,4′‐diphenylmethane diisocyanate (MDI), 2,4‐toluenediisocyanate (TDI), isophorone diisocyanate (IPDI), and hexamethylene diisocyanate (HDI). Differential scanning calorimetry, small‐angle X‐ray scattering, and dynamic mechanical analysis were employed to characterize the two‐phase structures of all PCLUs. It was found that HDI‐ and MDI‐based PCLUs had higher degree of microphase separation than did IPDI‐ and TDI‐based PCLUs, which was primarily due to the crystallization of HDI‐ and MDI‐based hard‐segments. As a result, the HDI‐based PCLU exhibited the highest recovery force up to 6 MPa and slowest stress relaxation with increasing temperature. Besides, it was found that the partial damage in hard‐segment domains during the sample deformation was responsible for the incomplete shape‐recovery of PCLUs after the first deformation, but the damage did not develop during the subsequent deformation. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 557–570, 2007     

Bis[μ‐1‐(1,10‐phenanthrolin‐2‐yl)‐2‐pyridone]bis{aqua[1‐(1,10‐phenanthrolin‐2‐yl)‐2‐pyridone]cadmium(II)} tetrakis(perchlorate)

In the title centrosymmetric binuclear complex, [Cd₂(C₁₇H₁₁N₃O)₄(H₂O)₂](ClO₄)₄, the Cd^II ion assumes a distorted octahedral geometry. There are π–π stacking interactions between the pyridine and 1,10‐phenanthroline ring systems of adjacent ligands at the same Cd^II centre. Intermolecular hydrogen bonds between the coordinated aqua ligand and the O atom of a keto group connect adjacent complex cations into extended chains. Hydrogen bonds also exist between the complex cations and the perchlorate anions. Compared with the fluorescence spectrum of the organic ligand, the complex displays strong fluorescent emission and an ipsochromic shift of the emission peaks, which may be attributed to the structural character.     

一种基于像素自适应仲裁的OSD分层混合结构设计

数据混合是OSD分层显示的关键技术之一.本文基于OSD的分层结构及数据组织结构特点,提出一种OSD分层显示的单混合结构,该结构采用基于像素自适应仲裁的策略,按照层优先级次序,对多个OSD图层信号实时地切换显示.FPGA验证结果表明,该结构在满足OSD分层混合显示、实现菜单选择鼠标控制等高级人机对话功能的前提下,其硬件资源开销比多混合结构节省约33%以上,且具有良好的层次可扩展性和操作灵活性.     

CreditRisk+模型下商业银行经济资本配置研究

对金融资产风险的度量与经济资本的分配应该体现分散化效应,传统的V aR方式不能保证分散化效应的次可加性.本文讨论了基于T a ilV aR这一新的风险度量与经济资本分配标准,并在违约率均值不变情况下,对C red itR isk+模型下的商业银行经济资本分配进行了实证分析.     

A framework for investigating radio resource management algorithms in TD-SCDMA systems

TDD-CDMA, globally recognized as the basis for Chinese 3G, is designed for symmetrical and asymmetrical 3G mobile services. As a time-division duplexing system, TD-SCDMA works in unpaired frequency allocations, supporting the flexible allocation of uplink/downlink slots in one carrier, and adapting to the different system loads between uplink and downlink. Dynamic time slot allocations make it more spectrally efficient than paired uplink/downlink carriers. Consequently, TD-SCDMA can make full use of the radio spectrum through optimal adaptive radio resource allocation. In order to support peak rates of 5 Mb/s or higher, the TD-SCDMA standard is enhanced via high-speed downlink packet access (HSDPA) mode. In this article the properties and strategies of radio resource management (RRM) are introduced, and the differences in admission control, power control, handover, load control, dynamic channel allocation, and adaptive HSDPA techniques between TDD-CDMA and the conventional FDD-CDMA system are analyzed. Some advanced strategies and architectures for TDD-CDMA RRM algorithms are presented. Since uplink multi-user detection (MUD) and smart antenna (SA) techniques are adopted in TD-SCDMA, the RRM algorithms based on MUD and SA are investigated further. In addition, these advanced RRM algorithms are characterized by an OPNET-based dynamical system-level simulator.     

Pulsed laser deposition of atomically flat La1-xSrxMnO3 thin films using a novel target geometry

A new ablation target geometry is presented that was used to produce thin films of La_1-xSr_xMnO₃ grown heteroepitaxially on SrTiO₃ by pulsed reactive crossed-beam laser ablation. The films were grown in order to perform angle-resolved photoelectron spectroscopy, which demands that the surface be atomically flat. In situ and ex situ analysis shows that this condition was met, even after depositing to a thickness of over 100 nm. PACS 61.10.-i; 61.18.Bn; 68.47.Gh; 71.27.+a; 81.15.Fg     

On Two Theorems of Finite Solvable Groups

For a finite group G, let T（G） denote a set of primes such that a prime p belongs to T（G） if and only if p is a divisor of the index of some maximal subgroup of G. It is proved that if G satisfies any one of the following conditions： （1） G has a p-complement for each p∈T（G）; （2）│T（G）│= 2： （3） the normalizer of a Sylow p-subgroup of G has prime power index for each odd prime p∈T（G）; then G either is solvable or G/Sol（G）≌PSL（2, 7） where Sol（G） is the largest solvable normal subgroup of G.     

大米中硒的FI-HG-AAS测定方法研究

研究了原子化器温度、载气流速、KBH4 浓度等条件对流动注射 氢化物发生 原子吸收光谱法 (FI-HG -AAS)测定硒时的影响。建立了FI-HG -AAS测定大米中硒的分析方法。在优化的工作条件下 ,测定硒的最低检测浓度为 0 3 3 μg·L- 1,线性范围为 0～ 5 0 μg·L- 1,相对标准偏差小于 4% ,加标回收率为 94%～ 1 0 2 %。本法克服了传统的间断氢化物发生 原子吸收光谱法分析速度慢、样品耗量大、操作繁琐且因手工进样在进样速度和进样体积上容易带来误差等缺点。方法操作简便、快速 ,灵敏度及自动化程度高 ,已广泛应用于大米及富硒大米中微量硒的测定