Amperometric detection of catecholamines with liquid chromatography at a novelly constructed prussian blue chemically modified electrode

A novel Prussian blue chemically modified electrode (CME) was constructed and characterized for liquid chromatography electrochemical detection (LCEC) of catecholamines. Both anodic and cathodic peaks could be obtained by monitoring at constant applied potential at anodic and slightly cathodic potential ranges (0.3-0.7 and -0.2-0.1 V vs. SCE), respectively. When arranged in a series configuration, using the modified electrodes as generating and collecting detectors, extremely high effective collection efficiencies of 0.91 (for norepinephrine) and 0.58 (for dihydroxyphenylacetic acid) were achieved in dual-electrode LCEC for catecholamines; and a linear response range over 3 orders of magnitude and a detection limit of 10 pg were obtained with a downstream CME as the indicating detector.     

Methodology for the preparation of C1-monoalkylated 1,2-dihydro[C70)] derivatives: formation of the "other" regioisomer

Deprotonation of 1,2-C(70)H(2) with TBAOH, followed by alkylation with methyl bromoacetate, results in formation of a C1-monoalkylated 1,2-dihydro-C(70) derivative. The position of the alkyl group (C1) was established by NMR spectroscopy and comparison with literature spectra of C2-monoalkylated analogs. Presumably, C1-alkylation is the major process due to selective deprotonation of 1,2-C(70)H(2) at C1. Substitution of benzyl bromide for methyl bromoacetate results in rapid dialkylation, unless the amount of base is carefully controlled, in which case C1-monobenzylation is the major process. This methodology for alkylation at C1 is complimentary to methods for the C2-monoalkylation of C(70) with Zn and methyl bromoacetate.     

传感法研究固态钢中镧活度

本文采用LaF3单晶固体电解质测量了473～1223K温度范围内钢中镧的活度.两个平行样品的活度值符合很好,并且LaF3单晶的起始工作温度约为880K.     

含嘧啶环的双冠醚(Ⅳ)

前文已报道由啶环桥联两个苯并冠醚的双冠醚的合成与性质。由于嘧啶环的刚性较大,能把两个冠醚单元固定在有效地协同作用位置,因此以它们作中性载体的离子选择性电极具有较好的选择性。为了进一步研究这类双冠醚的性质,我们合成了四种嘧啶环桥联两个脂肪族冠醚的双冠醚,并经元素分析、IR、′HNMR鉴定。     

Brillouin scattering and rotation translation coupling of (KCN)xX1−x mixed crystals

Brillouin scattering is used to study the concentration and temperature dependence of longitudinal and transverse phonon frequencies of KCN_χBr_1?χ, KCN_χC1_1?χ, and KCN_0.85I_0.15 mixed crystals. Unlike pure KCN, mixed crystals with χ < 0.7 show no phase transition upon cooling, and the transverse acoustic frequency ω_TA(110) displays a minimum at some characteristic temperature T_i.T_i is below the phase transition of pure KCN and depends on the C1^? concentration. The Brillouin data are discussed in terms of coupling of the acoustic phonons with orientational motion of CN^? ions and mean field theory.     

Analysis and parametric sensitivity of the behavior of overshoots in the concentration of a charged adsorbate in the adsorbed phase of charged adsorbent particles: practical implications for separations of charged solutes

In this work, an analysis of the parametric sensitivity of the overshoot in the concentration of the adsorbate in the adsorbed phase, which occurs under certain conditions during an ion-exchange adsorption process, is presented and used to suggest practical implications of the concentration overshoot phenomenon on operational policies and configurations of chromatographic columns and finite bath adsorption systems. The results presented in this work demonstrate and explain how the development of an overshoot in the concentration of the adsorbate in the adsorbed phase could be enhanced or suppressed by (i) varying the diffusion coefficient, D3, of the adsorbate relative to the diffusion coefficients, D1 and D2, of the cations and anions, respectively, of the background/buffer electrolyte, (ii) altering the initial surface charge density, delta0, of the charged adsorbent particles, (iii) varying the Debye length, lambda, and (iv) changing the initial concentration, Cd3(0), of the adsorbate in the bulk liquid of the finite bath. The influence of the pH and ionic strength, Iinfinity, of the liquid solution on the development of an overshoot in the concentration of the adsorbate in the adsorbed phase is also presented and discussed through the relationships of these parameters to delta0 and lambda, respectively. Furthermore, a detailed explanation of the effects of each parameter on the interplay between the diffusive and electrophoretic molar fluxes, as well as on the structure and functioning of the electrical double layer, which are responsible for the concentration overshoot phenomenon, is presented.     

Determination of catechol derivatives on pretreatment and copolymer coated glassy carbon electrode

A glassy carbon electrode was pretreated electrochemically and was coated with a copolymer of maleic acid anhydride attached with Eastman-AQ55D (MA/AQ). The voltammetric behavior of a series of biologically important compounds, such as dopamine, L-DOPA, DOPAC, ascorbic acid and uric acid were examined at both pretreated and coated electrodes. Electrochemical pretreatment increased peak current of dopamine and L-DOPA while decreased that of ascorbic acid, uric acid and DOPAC. The copolymer coating caused a decrease of peak currents, but effectively hindered the anionic species (ascorbic acid, uric acid and DOPAC) access to the electrode surface. In flow injection and liquid chromatographic analysis. The dopamine and L-DOPA yielded the better selectivity response at MA/AQ electrode than at bare and AQ electrodes.     

Polyamide Layer Chromatography. VIII. Preparation of Polyamide Layer on Poly(ethylene terephthalate) Film and its Application to Aromatic Nitro Compounds

Poly(ethylene terephthalate) film was used as supporter for preparation of polyamide layer. The most convenient method of preparation was described. This layer can be cut into any size and its sensitivity is higher than the glass plate supported layer. Twenty aromatic nitro compounds were used to show the behavior of polyester film based polyamide layer.     

Single Atom Alloy Preparation and Applications in Heterogeneous Catalysis

There have been remarkable progresses in manipulating heterogeneous catalysts' nanostructures in the past decade. The concept of single atom alloy (SAA) was firstly proposed in 2012 when researchers successfully stabilized single Pd atoms on the Cu(111) surface. However, earlier work in 2009, which focused on replacing one Au atom with a Pd atom in thiolate protected Au₂₅ nanoclusters, could also be considered as the pioneer work of single atom alloy. Both kinds of single atom alloys exhibited the potential of maximum utilization of scarce elements and attractive catalytic performances. The well‐defined structures of SAA catalysts make accurate modeling possible, which further realizes the rational design of single atom alloy catalysts. In this review, we summarize the research trajectory of single atom alloys as well as recent achievements in this field. We also introduce several commonly adopted characterization methods for SAA catalysts such as scanning tunneling microscopy (STM), temperature programmed reaction (TPR), extended X‐ray absorption fine structure (EXAFS) spectra, matrix assisted laser desorption/ionization mass spectrum (MALDI‐MS) and differential pulse voltammetry (DPV). Through discussing recent progresses in SAA catalysts, we propose that future researches in this filed should be focused on exploring new kinds of metal nanocrystals and controlling the nanostructure of SAA even more precisely.