Infrared spectroscopic analyses of transformations of chemical species on the silica highly-reacted with gaseous BF3.

Transformations of chemical species formed by the reaction of gaseous BF3 with high pressure and silica preheated at 473 and 1093 K were studied with the use of infrared absorption spectrometry. The species containing -BF2 and the species containing >BF were transformed to each other on the highly-reacted silica depending on the pressure of BF3 in cell, and some of the species containing -BF2 were also desorbed without their transformations to the species containing >BF. H2O played important roles in these transformations.     

Low thermal resistance high-speed top-emitting 980-nm VCSELs

Increasing copper plated heatsink radii from 0 to 4 /spl mu/m greater than the mesa in vertical-cavity surface-emitting lasers (VCSELs) reduced the measured thermal resistance for a range of device sizes to values 50% lower than previously reported over a range of device sizes. For a 9-/spl mu/m diameter oxide aperture, the larger heatsink increases output power and bandwidth by 131% and 40%, respectively. The lasers exhibit a 3-dB modulation frequency bandwidth up to 9.8 GHz at 10.5 kA/cm/sup 2/. The functional dependence of thermal resistance on oxide aperture diameter indicates the importance of lateral heat flow to mesa sidewalls.     

ORACLE编程中变量传值的实现

本文叙述了使用ORACLE语言编程中实现变量传值的几种方法，给出了实例。     

Study on effects of substrate temperature on growth and structure of alignment carbon nanotubes in plasma-enhanced hot filament chemical vapor deposition system

Alignment carbon nanotubes (ACNTs) were synthesized on silicon substrate coated with Ni catalyst film and Ta buffer layer by plasma-enhanced hot filament chemical vapor deposition using CH₄, NH₃, and H₂ as the reaction gas, and they were investigated by scanning electron microscopy and transmission electron microscopy. It is found that the diameter of the bamboo-structured ACNTs is increased from 62 to 177 nm when the substrate temperature was changed from 626 to 756 °C. Their growth rate is enhanced by the substrate temperature in a range of 626-683 °C and it is reversely reduced with the substrate temperature after the substrate temperature is over 683 °C. Beginning with wetting phenomenon, the effects of the substrate temperature on the structure and growth rate of the ACNTs are analyzed.     

XeF和KrF的热催化合成及KrF在含氟高能氧化剂NFBF合成中的应用

本文介绍了一种以氟气和惰性气体为原料合成 Kr F2 和 Xe F2 的热催化合成方法并对合成机理和条件作了简单的讨论 ,利用合成的 Kr F2 作为氟化剂合成了含氟高能氧化剂 NF4BF4,纯度约为 93%,其红外光谱和拉曼光谱基本与文献值吻合。元素分析结果表明产品 NF4BF4中含 B5.8%(mass) ,自由氟原子含量为 9.95%(mass) ,与理论值基本一致 ,此结果也间接证明了 Kr F2 质量的可靠性。粉末状的 Xe F2 经升华 -再结晶纯化后可得纯净晶体产品。     

A Novel Cu-Mo／ZSM-5 Catalyst for NOx Catalytic Reduction with Ammonia

The Cu-Mo/ZSM-5 catalysts with different Cu/Mo ratios were prepared by wet impregnation method, and their catalytic performance for selective catalytic reduction of NOx was studied. The results showed that Cu-Mo/ZSM-5 is a very effective catalyst for NOx catalytic reduction with ammonia, especially when Cu/Mo molar ratio is about 1.5. It not only exhibited the extremely high catalytic activity, but also showed good stability for 02. The bulk phase structure of Cu-Mo/ZSM-5 catalysts was determined by XRD technique, and the results indicated that there is a maximum dispersion for Cu species when Cu/Mo molar ratio is 1.5, and an interaction between Cu and Mo along with HZSM-5 may be present in Cu-Mo/ZSM-5, which may possibly result in a special structure favorable for the catalytic reduction of NOx over Cu-Mo/ZSM-5 catalyst.     

Durch Bromierung ausgelöste Umlagerung tertiärer Allylalkohole: Der Einfluss eines Fluor-Substituenten auf Reaktionsgeschwindigkeit und Reaktionsverlauf

Rearrangement of Tertiary Allyl Alcohols Induced by Bromination: The Effect of a Fluorine Substituent on the Rate and the Outcome of the Reaction The allyl alcohol bearing a methyl and a t-butyl group at the hydroxylated position was found to undergo a rearrangement when treated with bromine (or N-bromosuccinimide) in an aqueous medium and to afford a product mixture containing two regioisomeric ketones and one oxirane. Introduction of an additional methyl group or a fluorine atom at the non-terminal olefinic center led to a more selective discrimination between potential migratory groups. As the result of an exclusive t-butyl shift only one product, a ketone, was formed in both cases. Whereas the reaction rate was only slightly affected by the additional methyl group, it was substantially decreased by the fluorine atom.     

功能色素材料——苯重氮氨基偶氮苯类光度显色剂的研究

功能色素材料——苯重氮氨基偶氮苯类光度显色剂的研究罗小民周伟良孙培培吴斌才（华东师范大学化学系上海２０００６２）关键词光度显色剂离解电子光谱ＨＭＯ法中图分类号６２１．１３功能色素材料包括光致变色、电致变色、热致变色和压敏变色材料以及光度显色剂等。这些...