Reduction of octacyanomolybdate(V) by thioglycolic acid in aqueous media

In aqueous media at 25 degrees C [Mo(CN)(8)](3-) is reduced by thioglycolic acid (HSCH(2)COOH, TGA), and the reaction is strongly accelerated by the presence of trace amounts of copper ions. Dipicolinic acid (dipic) is an effective inhibitor of the copper catalysis. Both with and without dipic the reaction has the stoichiometry 2[Mo(CN)(8)](3-) + 2TGA --> 2[Mo(CN)(8)](4-) + RSSR, where RSSR is the disulfide derived from formal oxidative dimerization of TGA. In the presence of dipic, PBN (N-tert-butyl-alpha-phenyl-nitrone), and with a large excess of TGA the rate law for consumption of [Mo(CN)(8)](3-) is first order in both [TGA] and [Mo(CN)(8)(3-)]. The complex pH dependence is consistent with (-)SCH(2)CO(2)(-) being highly reactive (k = 1.8 x 10(4) M(-1) s(-1)), the monoanion being less reactive, and HSCH(2)CO(2)H being unreactive. A mechanism is proposed in which the dianion undergoes electron transfer to [Mo(CN)(8)](3-), thus generating the thiyl radical. Analysis of the electron-transfer rate constant in terms of Marcus theory yields an effective self-exchange rate constant for the thiolate/thiyl redox couple that is in reasonable agreement with the value derived previously from the reaction of TGA with [IrCl(6)](2-). When copper catalysis is inhibited, the two reactions differ substantially in that the yield of (-)O(3)SCH(2)CO(2)(-) is significant for [IrCl(6)](2-) but undetectable for [Mo(CN)(8)](3-).     

Cationic polymerization of dienes VII. New electron donors in the polymerization of 1,3-pentadiene initiated by aluminum trichloride in non-polar solvent

The aim of this research was to investigate new bulky electron donors (EDs) generating hindered active species in the cationic polymerization of 1,3-pentadiene initiated by AlCl₃ in pentane, in order to avoid or strongly reduce the reaction between the active species and the double bonds of the polymer which are responsible for side reactions. At room temperature, the polymerization in the presence of new ED, such as OPh₂, N(PhBr)₃, NPh₃ and SPh₂, allowed to obtain higher conversions and lower insoluble fractions than without electron donor. The formation of a complex ED/AlCl₃ was shown for each electron donor. However, in the case of NPh₃ and SPh₂, variations of the polymer microstructure demonstrated an interaction between active species and these EDs. Similar results were obtained at lower temperature (−10 °C). The beneficial effect of the presence of electron donors such as NPh₃ and SPh₂ demonstrated the validity of the concept of sterically hindered active species, but the polymerization was still uncontrolled.     

Semiempirical Molecular Orbital Studies of the Acylation Step in the Lipase‐Catalyzed Ester Hydrolysis

In this study, we present the results from the semiempirical molecular orbital calculations for the acylation step in the lipase‐catalyzed ester hydrolysis. The results reveal that the lowest energy path for the formation of the tetrahedral intermediate is for the serine residue of the catalytic triad to attack the substrate, followed by coupling heavy atom movement and proton transfer. The calculations of four active site models show that the cooperation of the aspartate group and the oxyanion hole is capable of lowering the activation energy by about 16 kcalmol^?1. Our results further suggest that the lipase‐catalyzed ester hydrolysis adopts the single proton transfer mechanism.     

Quantitative detection of N(7)-(2-hydroxyethyl)guanine adducts in DNA using high-performance liquid chromatography/electrospray ionization tandem mass spectrometry

High-performance liquid chromatography (HPLC) was combined with electrospray ionization tandem mass spectrometry (ESI-MS/MS) to develop a sensitive and selective method for the quantitative measurement of N(7)-(2-hydroxyethyl)guanine (N(7)-HEG) adducts in DNA obtained from ethylene oxide-exposed biological samples. Selected reaction monitoring (SRM) was used as the detection mode while the fragmentation product ion at m/z 152 generated from the precursor protonated N(7)-HEG (m/z 196) was monitored. The detection limits for N(7)-HEG were estimated by twofold serial dilution and determined to be 4 fmol in neat standard solution and 16 fmol when a matrix effect is considered. When the mass spectrometer was operated in the selected ion monitoring mode using only the first quadrupole (without MS/MS function), the detection limits increased to 128 fmol and 1 pmol (when matrix effect is considered), respectively. A good linear correlation (R(2) = 0.999) was observed for signal intensities obtained by injecting 16 fmol--33 pmol of N(7)-HEG into the HPLC/ESI-MS/MS system. Hep G2 cells were incubated for 8 h with medium containing various concentrations of ethylene oxide (ranging from 0.05 to 5.0 mM). A dose-response relationship was established, indicating that the adduct formation increases with the exposure level. The method shows potential, although the detection limit needs to be lowered for practical applications, for use in monitoring N(7)-HEG formation in other biological systems.     

Engineering reactions in crystalline solids: predicting photochemical decarbonylation from calculated thermochemical parameters

A detailed thermochemical analysis of the alpha-cleavage and decarbonylation reactions of acetone and several ketodiesters was carried out with the B3LYP/6-31G* density functional method. The heats of formation of several ground-state ketones and radicals were calculated at 298 K to determine bond dissociation energies (BDE) and radical stabilization energies (RSE) as a function of substituents. Results show that the radical-stabilizing abilities of the ketone substituents play a very important role on the thermodynamics of the alpha-cleavage and decarbonylation steps. An excellent correlation between calculated values and previous experimental observations suggests that photochemical alpha-cleavage and decarbonylation in crystals should be predictable from knowledge of excitation energies and the RSE of the substituent.     

Superacid cyclization of 13E,17E- and 13E,17Z-bicyclogeranylfarnesols and their acetates — An effective structurally selective stereospecific route to scalarane sesterterpenoids

Institute of Chemistry, Moldavian SSR Academy of Sciences, Kishinev. Translated from Khimiya Prirodnykh Soedinenii, No. 5, pp. 759–760, September–October, 1988.     

Palladium complexes with ethylene-bridged bis(N-heterocyclic carbene) for C-C coupling reactions

A series of new ethylene-bridged bis(imidazolium) halides with various N-substitutions were synthesized. Complexation of these imidazolium halides with Pd(OAc)₂ produced new Pd(II) ethylene-bridged bis(carbene) complexes. Crystallographic analyses of some of the new imidazolium salts and Pd(II) complexes were determined. Applications of these seven-member palladacycles in Suzuki and Heck coupling reactions produced comparable catalytic activities to those of six-member analogs.     

EPR and 1H and 13C dynamic nuclear polarization studies of a molecularly doped polymer: bisphenol A polycarbonate doped with trianisylamine and trianisylaminium perchlorate.

We have investigated the EPR and DNP behavior of a molecularly doped polymer modeling those used to transport electronic charge in electrophotography. The EPR spectra show no evidence of the superexchange reported for a closely related system based on tri-p-tolylamine. The difference may be due to larger charge-transfer matrix elements in the latter system. An unambiguous interpretation of the observed 1H DNP was rendered difficult by the unanticipated asymmetry of the EPR spectra. We report extensive data on the "three-spin" effect evident in the DNP-enhanced 13C NMR spectra, and comment on its potential for characterizing polymer interfaces.     

Synthesis of 20-deoxoluteone

20-Deoxoluteone has been synthesized from sclareol. Sclareol was brominated with phosphorus tribromide to form a mixture of primary allyl bromides, from which, by the malonic synthesis, a mixture of bicyclogeranylgeranylacetic acids was obtained which was cyclized with fluorosulfonic acid to form a mixture of two diastereomeric -lactones. The predominating lactone was converted by successive reduction with lithium tetrahydroaluminate, oxidation with oxalyl chloride in dimethyl sulfoxide, reaction with methylmagnesium iodide, and oxidation by the chromium trioxide/pyridine complex into 20-deoxyluteone.Institute of Chemistry, Moldavian SSR Academy of Science, Kishinev. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 346–353, May–June, 1990.     

Metal-defined polymeric variable optical attenuator

A variable optical attenuator (VOA) based on a metal-defined polymeric optical waveguide has been demonstrated for the first time. The metal film stressor deposited on top of the upper cladding layer not only produces the refractive index change within the core layer, but also acts as a thin-film heater allowing thermal tuning of the optical power within a metal-defined optical waveguide. Fabricated devices exhibit greater than 25 dB of optical attenuation with an applied electrical current of /spl sim/40 mA at 1550-nm wavelength. The switching speed of the VOA exhibits 800 /spl mu/s of rising and 720 /spl mu/s of falling time.