Intramolecular (4+3) cycloadditions of nitrogen-tethered epoxy enosilanes for the synthesis of heteropolycycles

Furans bearing epoxy enolsilane units linked by a nitrogen heteroatom tether undergo intramolecular (4 + 3) cycloadditions to generate bis-heteroatomic polycyclic adducts having piperidine moieties in their frameworks. The cycloadducts, ultimately derived from furfural, a renewal chemical feedstock, are obtained with up to 4:1 dr and with ee retained from the epoxide.     

Benchmarking the ACEnano Toolbox for Characterisation of Nanoparticle Size and Concentration by Interlaboratory Comparisons

ACEnano is an EU-funded project which aims at developing, optimising and validating methods for the detection and characterisation of nanomaterials (NMs) in increasingly complex matrices to improve confidence in the results and support their use in regulation. Within this project, several interlaboratory comparisons (ILCs) for the determination of particle size and concentration have been organised to benchmark existing analytical methods. In this paper the results of a number of these ILCs for the characterisation of NMs are presented and discussed. The results of the analyses of pristine well-defined particles such as 60 nm Au NMs in a simple aqueous suspension showed that laboratories are well capable of determining the sizes of these particles. The analysis of particles in complex matrices or formulations such as consumer products resulted in larger variations in particle sizes within technologies and clear differences in capability between techniques. Sunscreen lotion sample analysis by laboratories using spICP-MS and TEM/SEM identified and confirmed the TiO₂ particles as being nanoscale and compliant with the EU definition of an NM for regulatory purposes. In a toothpaste sample orthogonal results by PTA, spICP-MS and TEM/SEM agreed and stated the TiO₂ particles as not fitting the EU definition of an NM. In general, from the results of these ILCs we conclude that laboratories are well capable of determining particle sizes of NM, even in fairly complex formulations.     

Perceptual study of soundscapes in train stations

This paper presents a study on the perception of soundscapes in train stations. The two issues addressed by this study are (1) to show that people’s knowledge about the space typology that makes up a train station is also based on sound information, and (2) to show that this information is involved in the recognition of the type of space. This study is composed of two stages. In the first stage, two auditory experiments are performed on 66 soundscape samples recorded under natural conditions: (1) free categorization with verbalization and (2) forced-choice recognition. The statistical and lexical analysis of the first experiment reveals three main types of acoustical information: sound sources, human activities, and room effects. The results of the second experiment show that people were able to recognize the type of space (platform, hall, etc.) just by listening to its soundscape. Comparison between Experiments 1 and 2 reveals the auditory similarities of the soundscapes that were recognized as belonging to the same category. In the second step, an in situ questionnaire survey was carried out and confirms the laboratory results. Indeed, when travelers are asked to describe the soundscape of the space in which they are situated, they use the same kind of auditory similarities as those found in the experiments.     

Rotationally excited CO from formaldehyde photodissociation

CO(J=26–63) produced by 355 nm photolysis of H₂CO was observed by VUV laser-excited flourescence. The temporal behavior of CO(J=36) indicates that rotationally excited CO fills the role of the long-lived intermediate in formaldehyde photodissociation.     

Space-resolved thermal properties of thermoplastics reinforced with carbon nanotubes

Composites comprising biobased poly(lactic acid) (PLA) and polyethylene (Bio-PE) were reinforced with multi-walled carbon nanotubes (MWCNTs). These nanocomposites were analyzed using space-resolved thermal analysis (TA) integrated with atomic force microscopy. The deflection temperature, which indicates thermal-induced expansion and thermal transitions of the composite, was monitored by nanoscale TA (nanoTA) utilizing the displacement of a cantilever in contact with the material. Results were compared to bulk electrical, mechanical and thermal properties. Electrical conductivity was detected at lower MWCNT loadings for PLA than for Bio-PE (at 2.5 vs. 5 mass%). Maximal electrical conductivity of 27 S m^?1 for PLA and 0.7 S m^?1 for Bio-PE-based samples was reached at 10 mass% MWCNT loading. Tensile behavior combined with thermogravimetric analysis indicated strong MWCNT–Bio-PE interactions, in contrast to PLA. The glass transition and melting temperature measured by differential scanning calorimetry (DSC) were not changed by the increase in MWCNT loading. Increased deflection temperature was registered by bulk heat deflection measurements on Bio-PE, but not for PLA. The thermal transitions obtained by nanoTA at the nanoscale were in the same temperature range as the first transitions observed upon temperature ramp in DSC (e.g., glass transition and melt temperatures of PLA and Bio-PE, respectively). Remarkably, thermal expansion was detected by nanoTA for PLA- and Bio-PE-based composites below electrical percolation threshold as well as an increase in PLA softening temperature. Space-resolved nanothermal analysis revealed thermal phenomena that are otherwise overlooked when bulk methods are applied.     

An ionic liquid-based sensor for diclofenac determination in water

This paper details a miniaturised, solid state ion-selective electrode selective for diclofenac. The sensor comprises a novel ionic liquid electroactive material – an imidazolium–diclofenac ion associate. The ion associate is present in a plasticised poly(vinyl chloride) (PVC) membrane on planar carbon electrodes, with an intermediate poly(3,4-ethylenedioxythiophene) layer. The sensitivity and selectivity of the sensor were determined using chronopotentiometric methods. In response to diclofenac, a slope of ?53.3 ± 3.6 mV/dec was observed. A limit of detection of 2.90 × 10^?3 g L^?1 is reported, with a linear range of 3.18 × 10^?3 g L^?1 to 3.18 g L^?1. The sensors show good selectivity towards diclofenac against pertinent interferent molecules, with a response time of <15 s.     

A mechanically interlocked molecular system programmed for the delivery of an anticancer drug

The development of mechanically interlocked molecular systems programmed to operate autonomously in biological environments is an emerging field of research with potential medicinal applications. Within this framework, functional rotaxane- and pseudorotaxane-based architectures are starting to attract interest for the delivery of anticancer drugs, with the ultimate goal to improve the efficiency of cancer chemotherapy. Here, we report an enzyme-sensitive [2]-rotaxane designed to release a potent anticancer drug within tumor cells. The molecular device includes a protective ring that prevents the premature liberation of the drug in plasma. However, once located inside cancer cells the [2]-rotaxane leads to the release of the drug through the controlled disassembly of the mechanically interlocked components, in response to a determined sequence of two distinct enzymatic activations. Furthermore, in vitro biological evaluations reveal that this biocompatible functional system exhibits a noticeable level of selectivity for cancer cells overexpressing β-galactosidase.     

Increased Lewis acidity in hafnium-substituted polyoxotungstates

Monolacunary polyoxotungstates [alpha(1)-P(2)W(17)O(61)](10-) and [alpha-PW(11)O(39)](7-) react with HfCl(4) to yield [alpha(1)-HfP(2)W(17)O(61)](6-) and [alpha-Hf(OH)PW(11)O(39)](4-), isolated as organo-soluble tetrabutylammonium (TBA) salts. Subsequent analyses, including mass spectrometry, show that they are stronger Lewis acids than (TBA)(5)H(2)[alpha(1)-YbP(2)W(17)O(61)]. The new polyoxotungstates catalyze Lewis acid mediated organic reactions, such as Mukaiyama aldol and Mannich-type additions. In particular, reactions with aldehydes, which were impossible with lanthanide polyoxotungstates, are made possible. Thus these modifications of the polyoxometalate composition allowed fine tuning of the Lewis acidity. The catalysts could be easily recovered and reused.     

The Short-Term Exposure to SDHI Fungicides Boscalid and Bixafen Induces a Mitochondrial Dysfunction in Selective Human Cell Lines

Fungicides are used to suppress the growth of fungi for crop protection. The most widely used fungicides are succinate dehydrogenase inhibitors (SDHIs) that act by blocking succinate dehydrogenase, the complex II of the mitochondrial electron transport chain. As recent reports suggested that SDHI-fungicides could not be selective for their fungi targets, we tested the mitochondrial function of human cells (Peripheral Blood Mononuclear Cells or PBMCs, HepG2 liver cells, and BJ-fibroblasts) after exposure for a short time to Boscalid and Bixafen, the two most used SDHIs. Electron Paramagnetic Resonance (EPR) spectroscopy was used to assess the oxygen consumption rate (OCR) and the level of mitochondrial superoxide radical. The OCR was significantly decreased in the three cell lines after exposure to both SDHIs. The level of mitochondrial superoxide increased in HepG2 after Boscalid and Bixafen exposure. In BJ-fibroblasts, mitochondrial superoxide was increased after Bixafen exposure, but not after Boscalid. No significant increase in mitochondrial superoxide was observed in PBMCs. Flow cytometry revealed an increase in the number of early apoptotic cells in HepG2 exposed to both SDHIs, but not in PBMCs and BJ-fibroblasts, results consistent with the high level of mitochondrial superoxide found in HepG2 cells after exposure. In conclusion, short-term exposure to Boscalid and Bixafen induces a mitochondrial dysfunction in human cells.