Speciation of chromium by ion chromatography and laser-enhanced ionization: optimization of the excitation-ionization scheme

Ion chromatography and laser-enhanced ionization were combined for the speciation of chromium at the trace level. Several one- and two-step excitation schemes were examined, in the UV and visible regions of the spectrum. It was found that a near-resonant two-step/one-color excitation scheme, using a single strongly saturating laser for the simultaneous excitation of both steps of the (3d⁵4s) ⁷S₃→(3d⁵4p) ⁷P₃⁰→(3d⁴4s5s) ⁷D₄ sequence, provides the best analytical results. This scheme was applied to the determination of total chromium in solutions directly aspirated into the air–acetylene flame, and to the determination of Cr(III) and Cr(VI) separated by ion chromatography. A detection limit of 0.5 ng/mL was obtained by direct solution aspiration, with a dynamic range covering four orders of magnitude. Detection limits of 5 ng/mL for Cr(III) and 4 ng/mL for Cr(VI) were obtained by ion chromatography and laser-enhanced ionization.     

An ionic liquid-based sensor for diclofenac determination in water

This paper details a miniaturised, solid state ion-selective electrode selective for diclofenac. The sensor comprises a novel ionic liquid electroactive material – an imidazolium–diclofenac ion associate. The ion associate is present in a plasticised poly(vinyl chloride) (PVC) membrane on planar carbon electrodes, with an intermediate poly(3,4-ethylenedioxythiophene) layer. The sensitivity and selectivity of the sensor were determined using chronopotentiometric methods. In response to diclofenac, a slope of ?53.3 ± 3.6 mV/dec was observed. A limit of detection of 2.90 × 10^?3 g L^?1 is reported, with a linear range of 3.18 × 10^?3 g L^?1 to 3.18 g L^?1. The sensors show good selectivity towards diclofenac against pertinent interferent molecules, with a response time of <15 s.     

Space-resolved thermal properties of thermoplastics reinforced with carbon nanotubes

Composites comprising biobased poly(lactic acid) (PLA) and polyethylene (Bio-PE) were reinforced with multi-walled carbon nanotubes (MWCNTs). These nanocomposites were analyzed using space-resolved thermal analysis (TA) integrated with atomic force microscopy. The deflection temperature, which indicates thermal-induced expansion and thermal transitions of the composite, was monitored by nanoscale TA (nanoTA) utilizing the displacement of a cantilever in contact with the material. Results were compared to bulk electrical, mechanical and thermal properties. Electrical conductivity was detected at lower MWCNT loadings for PLA than for Bio-PE (at 2.5 vs. 5 mass%). Maximal electrical conductivity of 27 S m^?1 for PLA and 0.7 S m^?1 for Bio-PE-based samples was reached at 10 mass% MWCNT loading. Tensile behavior combined with thermogravimetric analysis indicated strong MWCNT–Bio-PE interactions, in contrast to PLA. The glass transition and melting temperature measured by differential scanning calorimetry (DSC) were not changed by the increase in MWCNT loading. Increased deflection temperature was registered by bulk heat deflection measurements on Bio-PE, but not for PLA. The thermal transitions obtained by nanoTA at the nanoscale were in the same temperature range as the first transitions observed upon temperature ramp in DSC (e.g., glass transition and melt temperatures of PLA and Bio-PE, respectively). Remarkably, thermal expansion was detected by nanoTA for PLA- and Bio-PE-based composites below electrical percolation threshold as well as an increase in PLA softening temperature. Space-resolved nanothermal analysis revealed thermal phenomena that are otherwise overlooked when bulk methods are applied.     

Increased Lewis acidity in hafnium-substituted polyoxotungstates

Monolacunary polyoxotungstates [alpha(1)-P(2)W(17)O(61)](10-) and [alpha-PW(11)O(39)](7-) react with HfCl(4) to yield [alpha(1)-HfP(2)W(17)O(61)](6-) and [alpha-Hf(OH)PW(11)O(39)](4-), isolated as organo-soluble tetrabutylammonium (TBA) salts. Subsequent analyses, including mass spectrometry, show that they are stronger Lewis acids than (TBA)(5)H(2)[alpha(1)-YbP(2)W(17)O(61)]. The new polyoxotungstates catalyze Lewis acid mediated organic reactions, such as Mukaiyama aldol and Mannich-type additions. In particular, reactions with aldehydes, which were impossible with lanthanide polyoxotungstates, are made possible. Thus these modifications of the polyoxometalate composition allowed fine tuning of the Lewis acidity. The catalysts could be easily recovered and reused.     

C−N Bond Formation from a Masked High‐Valent Copper Complex Stabilized by Redox Non‐Innocent Ligands

The reactivity of a stable copper(II) complex bearing fully oxidized iminobenzoquinone redox ligands towards nucleophiles is described. In sharp contrast with its genuine low‐valent counterpart bearing reduced ligands, this complex performs high‐yielding C?N bond formations. Mechanistic studies suggest that this behavior could stem from a mechanism akin to reductive elimination occurring at the metal center but facilitated by the ligand: it is proposed that a masked high oxidation state of the metal can be stabilized as a lower copper(II) oxidation state by the redox ligands without forfeiting its ability to behave as a high‐valent copper(III) center. These observations are substantiated by a combination of advanced EPR spectroscopy techniques with DFT studies. This work sheds light on the potential of redox ligands as promoters of unusual reactivities at metal centers and illustrates the concept of masked high‐valent metallic species.     

One‐pot synthesis of a new high vinyl content hybrid silica monolith dedicated to nanoliquid chromatography

A new vinyltrimethoxysilane‐based hybrid silica monolith was developed and used as a reversed‐phase capillary column. The synthesis of this rich vinyl hybrid macroporous monolith, by cocondensation of vinyltrimethoxysilane with tetramethoxysilane, was investigated using an unconventional (formamide, nitric acid) porogen/catalyst system. A macroporous hybrid silica monolith with 80% in mass of vinyltrimethoxysilane in the feeding silane solution was obtained and compared to a more conventional low vinyl content hybrid monolith with only of 20% vinyltrimethoxysilane. Monoliths were characterized by scanning electron microscopy, ²⁹Si nuclear magnetic resonance spectroscopy and N₂ adsorption–desorption. About 80% of the vinyl precursor was incorporated in the final materials, leading to 15.9 and 61.5% of Si atoms bonded to vinyl groups for 20% vinyltrimethoxysilane and 80% vinyltrimethoxysilane, respectively. The 80% vinyltrimethoxysilane monolith presents a lower surface area than 20% vinyltrimethoxysilane (159 versus 551 m²/g), which is nevertheless compensated by a higher vinyl surface density. Chromatographic properties were evaluated in reversed‐phase mode. Plots of ln(k) versus percentage of organic modifier were used to assess the reversed‐phase mechanism. Its high content of organic groups leads to high retention properties. Column efficiencies of 170 000 plates/m were measured for this 80% vinyltrimethoxysilane hybrid silica monolith. Long capillary monolithic columns (90 cm) were successfully synthesized (N = 120 000).     

Certification of trace element contents (As, Cd, Co, Cu, Fe, Mn, Hg, Na, Pb and Zn) in a fly ash obtained from the combustion of pulverised coal

Summary The element contents of As, Cd, Co, Cu, Fe, Mn, Hg, Na, Pb und Zn of a fly ash from pulverised coal are certified. The procedures and their results for the homogenisation, the contamination and homogeneity checks and the analytical campaign are reported. The certified mass fractions and indicative values for Cr, Ni, Th, V and water soluble sulphate are given. The work was carried out within the framework of the activities of the Community Bureau of Reference (BCR) of the Commission of the European Communities.

---

Zertifizierung von Spurengehalten (As, Cd, Co, Cu, Fe, Mn, Hg, Na, Pb und Zn) in einer Flugasche aus Pulverkohle

Zusammenfassung In einer Flugasche aus Pulverkohle wurden die Elementgehalte an As, Cd, Co, Cu, Fe, Mn, Hg, Na, Pb und Zn zertifiziert. Über die Homogenisierung, die Kontrolle der Kontaminierung und Homogenität und die analytischen Ringversuche wird berichtet. Die zertifizierten Gehalte sowie der Gehalt von Cr, Ni, Th, V und wasserlöslichem Sulfat werden gegeben. Die Arbeit wurde ausgeführt im Rahmen des Programms des Referenzbüros der Kommission der Europäischen Gemeinschaften (BCR).

     

Chiral inversion of 2-arylpropionyl-CoA esters by human α-methylacyl-CoA racemase 1A (P504S)--a potential mechanism for the anti-cancer effects of ibuprofen

Metabolic chiral inversion of 2-arylpropanoic acids (2-APAs;'profens'), such as ibuprofen, is important for pharmacological activity. Several 2-APA-CoA esters were good racemisation substrates for human AMACR 1A, suggesting a common chiral inversion pathway for all 2-APAs and an additional mechanism for their anti-cancer properties.     

Spontaneous Oxidative Addition of σ-SiSi Bonds at Gold

Gold can do it! The activation of disilanes at gold was observed experimentally and analyzed theoretically. Upon chelation with two or even only one phosphine donor, the oxidative addition of σ-Si?Si bonds proceeds readily at low temperatures. These results show an unexpected similarity between gold and the other late transition metals towards σ?bond activation.