Phase diagram of Na2S2O3 + ethanol + water at ambient pressure and temperature

In the present communication, we report the studies concerning liquid–liquid–solid equilibria for the ternary system sodium thiosulphate (Na₂S₂O₃) + ethanol + water at ambient pressure and at room temperature (303 ± 2 K). The solubility data of Na₂S₂O₃ are reported for solutions in water, ethanol and solutions of varying concentrations of ethanol in water. The phase diagram for the said system is developed, described and compared with similar system K₂CO₃ + methanol + water. These results have been explained in terms of structural properties of aqueous ethanol solutions and further discussed in terms of the effect of ions to cause phase separation.     

Net information measures for modified Yukawa and Hulthén potentials

The dimensional analyses of the position and momentum variances‐based quantum mechanical Heisenberg uncertainty measure, as well as the entropic information measures given by the Shannon information entropy sum and the product of Fisher information measures are carried out for two widely used nonrelativistic isotropic exponential‐cosine screened Coulomb potentials generated by multiplying the superpositions of (i) Yukawa‐like, ?Z(e^?μr/r), and (ii) Hulthén‐like, ?Zμ(1/(e^μr ? 1)), potentials by cos(bμr) followed by addition of the term a/r², where a and b ≥ 0, μ are the screening parameters and Z, in case of atoms, denotes the nuclear charge. Under the spherical symmetry, all the information measures considered are shown to be independent of the scaling of the set [μ, Z] at a fixed value of μ/Z, a, and b and the other parameters defining the superpositions of the potentials. Numerical results are presented, which support the validity of the scaling properties. © 2007 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Effects of structural imperfections on the dynamic mechanical response of main-chain smectic elastomers

We examine the influence of structural imperfections on mechanical damping in polydomain smectic main-chain liquid crystalline elastomers (MCLCE) subjected to small strain oscillatory shear. The mechanical loss factor tan δ = G″(ω)/G′(ω) exhibits a strong maximum (tan δ ≈ 1.0) near the smectic-isotropic (clearing) transition. “Optimal” elastomers that exhibit minimal equilibrium swelling in a good solvent are compared with highly swelling “imperfect elastomers” that contain higher concentrations of structural imperfections such as pendant chains. For the imperfect elastomers, tan δ is markedly enhanced in the isotropic state because of relaxation of pendant chains and other imperfections. However, within the smectic state, the magnitude of tan δ and its temperature dependence are similar for optimal and imperfect elastomers at ω = 1 Hz. The prominent loss peak near the clearing transition arises from segment-level relaxations that are insensitive to the details of chain connectivity. Smectic MCLCE can be tailored for applications as vibration-damping materials by manipulating the clearing transition temperature through the backbone structure or by deliberate introduction of structural imperfections such as pendant chains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 3267–3276, 2007     

Tetraphenylethene‐Based Conjugated Fluoranthene: A Potential Fluorescent Probe for Detection of Nitroaromatic Compounds

This study reports the synthesis and photophysical properties of a star‐shaped, novel, fluoranthene–tetraphenylethene (TFPE) conjugated luminogen, which exhibits aggregation‐induced blue‐shifted emission (AIBSE). The bulky fluoranthene units at the periphery prevent intramolecular rotation (IMR) of phenyl rings and induces a blueshift with enhanced emission. The AIBSE phenomenon was investigated by solvatochromic and temperature‐dependent emission studies. Nanoaggregates of TFPE, formed by varying the water/THF ratio, were investigated by SEM and TEM and correlated with optical properties. The TFPE conjugate was found to be a promising fluorescent probe towards the detection of nitroaromatic compounds (NACs), especially for 2,4,6‐trinitrophenol (PA) with high sensitivity and a high Stern–Volmer quenching constant. The study reveals that nanoaggregates of TFPE formed at 30 and 70 % water in THF showed unprecedented sensitivity with detection limits of 0.8 and 0.5 ppb, respectively. The nanoaggregates formed at water fractions of 30 and 70 % exhibit high Stern–Volmer constants (K_sv=79 998 and 51 120 m ^?1, respectively) towards PA. Fluorescence quenching is ascribed to photoinduced electron transfer between TFPE and NACs with a static quenching mechanism. Test strips coated with TFPE luminogen demonstrate fast and ultra‐low‐level detection of PA for real‐time field analysis.     

Noria: A Highly Xe‐Selective Nanoporous Organic Solid

Separation of xenon and krypton is of industrial and environmental concern; the existing technologies use cryogenic distillation. Thus, a cost‐effective, alternative technology for the separation of Xe and Kr and their capture from air is of significant importance. Herein, we report the selective Xe uptake in a crystalline porous organic oligomeric molecule, noria, and its structural analogue, PgC‐noria, under ambient conditions. The selectivity of noria towards Xe arises from its tailored pore size and small cavities, which allows a directed non‐bonding interaction of Xe atoms with a large number of carbon atoms of the noria molecular wheel in a confined space.     

Combined atomic force microscopy and fluorescence correlation spectroscopy measurements to study the dynamical structure of interfacial fluids

We have studied the dynamic structure of thin (approximately a few nanometers) liquid films of a nearly spherical, nonpolar molecule tetrakis(2-ethylhexoxy)silane (TEHOS) by using a combination of atomic force microscopy (AFM) and fluorescence correlation spectroscopy (FCS). Ultra-sensitive interferometer-based AFM was used to determine the stiffness (force gradient) and the damping coefficient of the liquid film. The experiments show oscillations in the damping coefficient with a period of approximately 1 nm, which is consistent with the molecular dimension of TEHOS as well as previous X-ray reflectivity measurements. Additionally, we performed FCS experiments for direct determination of the molecular dynamics within the liquid film. From the fluctuation autocorrelation curve, we measured the translational diffusion of the probe molecule embedded within the fluid film formed on a solid substrate. The autocorrelation function was best fitted with two components, which indicate that the dynamics are heterogeneous in nature. However, the heterogeneity is not as pronounced as had been previously observed for molecularly thin liquid films sandwiched between two solid substrates.     

Green Synthesis of Silver Nanoparticles Using Water Extract from Galls of <Emphasis Type="Italic">Rhus Chinensis</Emphasis> and Its Antibacterial Activity

The green synthesis of silver nanoparticles (AgNPs) has been proposed as a simple, eco-friendly and cost effective alternative to chemical and physical methods. The Rhus chinensis plant is one of the well studied medicinal plant and its galls find excellent clinical and therapeutic applications. The present study reports the use of water extract from galls of R. chinensis as a reducing agent and formation of AgNPs from silver nitrate solution by a green synthesis route. The AgNPs formation was observed visually by color change and the absorbance peak at 450 nm was observed by UV–Visible spectrophotometer. The shape, size, and morphology of synthesized AgNPs were monitored by transmission electron microscopy and field-emission scanning electron microscopy. The face centered cubic structure of AgNPs was confirmed by X-ray diffraction pattern and element composition by energy dispersive X-ray analysis. The Fourier transform infrared spectroscopy spectrum revealed that the presence of components acts as a reducing and capping agent. The antibacterial activity was performed using the agar well diffusion method. Minimum inhibitory concentration and minimum bactericidal concentration were determined by broth dilution and spread plate method respectively. Synthesized nanoparticles were spotted as triangular and hexagonal shape and the particle size was around 150 nm.     

Ecofriendly synthesis and biological evaluation of 4-(4-nitro-phenyl)-2-phenyl-1,4-dihydro-benzo[4,5]imidazo[1,2-a]pyrimidine-3-carboxylic acid ethyl ester derivatives as an antitubercular agents

An ecofriendly route has been investigated for the synthesis of 4-(4-nitro-phenyl)-2-phenyl-1,4-dihydro-benzo[4,5]imidazo[1,2-a]pyrimidine-3-carboxylic acid ethyl ester derivatives by one-pot, three-component condensation of ethyl benzoylacetate, aromatic aldehydes, and 2-amino benzimidazole using 260?mol% of citric acid as reaction mediator. Citric acid is an inexpensive, nontoxic, and green medium with smoothly activates the rate of reaction. The synthesized compounds were assessed for in vitro antimycobacterial activity against Mycobacterium tuberculosis H₃₇RV strain using the microplate alamar blue assay (MABA). The results indicate that among all the synthesized compound series, P-4 and P-9 compounds illustrate effective activity with a minimum inhibitory concentration of 25?µg/ml.     

Copper phthalocyanine films deposited by liquid-liquid interface recrystallization technique (LLIRCT)

The simple recrystallization process is innovatively used to obtain the nanoparticles of copper phthalocyanine by a simple method. Liquid-liquid interface recrystallization technique (LLIRCT) has been employed successfully to produce small sized copper phthalocyanine nanoparticles with diameter between 3-5 nm. The TEM-SAED studies revealed the formation of 3-5 nm sized with beta-phase dominated mixture of alpha and beta copper phthalocyanine nanoparticles. The XRD, SEM, and the UV-vis studies were further carried out to confirm the formation of copper phthalocyanine thin films. The cyclic voltametry (CV) studies conclude that redox reaction is totally reversible one electron transfer process. The process is attributed to Cu(II)/Cu(I) redox reaction.     

The development of iodide-based methods for batch and on-line determinations of phosphite in aqueous samples

Recent developments in the field of microbiology and research on the origin of life have suggested a possible significant role for reduced, inorganic forms of phosphorus (P) such as phosphite [HPO₃²⁻, P(+III)] and hypophosphite [H₂PO₂⁻, P(+I)] in the biogeochemical cycling of P. New, robust methods are required for the detection of reduced P compounds in order to confirm the importance of these species in the overall cycling of P in the environment. To this end, we have developed new batch and flow injection (FI) methods for the determination of P(+III) in aqueous solutions. The batch method is based on the reaction of P(+III) with a mixed-iodide solution containing tri-iodide (I₃⁻) and penta-iodide (I₅⁻). The oxidation of P(+III) consumes free I₃⁻ and I₅⁻ in solution. The remaining I₃⁻ and I₅⁻ subunits are then allowed to react with the amylose content in starch to form a blue complex, which has a λ_max of 580 nm. The measurement of this blue complex is directly correlated with the concentration of P(+III). The on-line FI method employs the same reaction between P(+III) and mixed-iodide producing phosphate [P(+V)] that is determined spectrophotometrically by the molybdenum blue method employing ascorbic acid at a λ_max of 710 nm. The linear range for both the batch and FI determination of P(+III) was 1.0–50 μM with detection limits of 0.70 and 0.36 μM, respectively. Interference studies for the batch method show that arsenite [As(+III)] and sulfite [S(+IV)] can also be determined by this technique; however, these interferences can be circumvented by oxidizing As(+III) and S(+IV) using KMnO₄ which is an ineffective oxidant for P(+III). Both methods were applied to P(+III) determinations in ultra-pure water and simulated creek water. Results and analytical figures of merit are reported and future work is considered.