激光器实用价值的评判

提出用于评价激光器产品实用价值的Q因子,它由激光器的亮度、脉冲宽度及价格确定。Q值大的激光器,开发及发展的潜力大。     

Traveling wave method for calculation of linewidth, frequencytuning, and stability of semiconductor lasers

The authors present a new traveling wave method for calculating the linewidth, the frequency tuning efficiency, and a mode stability parameter for a general class of laser-diode structures. The method leads to simple semianalytic expressions which allow an easy numerical determination of the three parameters     

Simple autocorrelation technique based on degree-of-polarization measurement

We demonstrate a simple optical-fiber-based autocorrelator for picosecond short pulses based on degree-of-polarization measurement while tuning the relative delay of the two orthogonal polarization states of the pulse. The pulsewidths of 20-, 40-, and 80-GHz pulse trains and 2-ps pulses generated by a mode-locked laser are measured. The <-10-dBm optical powers are used in the experiment. The measurement results agree well with the measurements using conventional techniques. Compared with conventional autocorrelators, this technique has the advantages of 1) wavelength independent, 2) significant less alignment, and 3) no high power required.     

MERLIN: a device diagnosis system based on analytic models

An approach to computer-aided interpretation of parametric test data for integrated circuit process-problem diagnosis is presented. In contrast to a conventional expert system, which reasons with a knowledge base consisting of rules acquired from human experts, the system presented centers its knowledge around analytic device equations. By using equations as the basis of the system knowledge, a more universal, well-organized, and concise level of knowledge is encoded. With the use of objects to present this knowledge, a great deal of useful information outside that described by only the symbolic expressions can be represented, and extension to qualitative or numeric models should be straightforward. The result is an expressive, well-organized, easily built, and easily maintained knowledge base. The authors describe the system's interactive graphical displays and the automatic data interpretation algorithms. Examples evaluating n-channel metal oxide semiconductor (NMOS) parameter variations, interconnect parameter variations, and interconnect yields are used for illustration     

关于非球面制造技术的看法

列举了现代诸高科技领域对非球面光学系统的需求实例，如短波光学，空间光学，红外光学，微电子技术等。然后比较讨论了刀口阴影法与数字干涉检验的优缺点。在非球面修磨方法方面，首先肯定了计算机辅助加工是发展的方向，指出其主要优点在于“失误”造成的反复率大大降低。最后对非球面技术提出了总的看法，并对检测方法和修磨方法提出了几个研究课题。     

V型天线的行波加载公式

本文研究了ｖ型天线上电流分布与阻抗加载的关系，导出了支持天线上行波电流的阻抗加载公式。讨论了天线张角、振子半径以及振子长度与加载量的关系和规律，说明了加载Ｖ型天线的宽带特性。文中还计算了在高斯脉冲激励下，不同加载量的天线上瞬态电流的分布，由此可以表明所导加载公式的正确性与重要性。     

Preparation of Y2Ba4Cu7O15-δ Superconductor without High Oxygen Pressure

The synthesis of bulk Y₂Ba₄Cu₇O_15-δ superconductor at atmospheric oxygen pressure via solid state sintering is reported. Temperature ranging from 860 to 890 °C as well as time interval over 2 to 15 days were used to investigate the formation of the Y₂Ba₄Cu₇O_15-δ phase. A time-temperature profile characterizing the conditions for the preparation of Y₂Ba₄Cu₇O_15-δ phase suggests the optimal condition to be sintering at 890 °C for over 10 days. Detailed results of X-ray diffraction, electrical resistivity, iodometric titration and magnetization measurements are described.     

6(5H)-phenanthridinones. II. Preparation of substituted 6(5h)-phenanthridinones from 9-oxofluorenes

A number of 6(5H)-phenanthridinones have been conveniently prepared from 9-oxofluorenes through the Schmidt reaction. It has been found that all amino and nitro 9-oxofluorenes thus far tried gave substituted 6(5H)-phenanthridinones with the amino or nitro group situated in the benzene ring attached to the nitrogen of the lactam group. UV and IR spectral data are presented for these compounds.     

Studies on the determination of diacetyl guanfubase A concentration in rabbit plasma and pharmacokinetics

A gas chromatographic method for monitoring diacetyl guanfubase A in plasma is described. The procedure involved a single solvent extraction of drug from rabbit plasma into ethyl acetate with guanfubase A as an internal standard. The extract was analyzed subsequently on a gas chromatograph equipped with a hydrogen flame ionization detector. The recovery was 86.43% +/- 6.90% (+/- SD); the RSD of within-day and between-day was 2.81%-5.26% and 5.22%-8.24%, respectively; the regression line was linear over the concentration range of 25-200 micrograms/mL, the limit of detection was 10 micrograms/mL. No endogeneous interference was found in chromatograms of the biological samples. This method was applied to the pharmacokinetic study of diacetyl guanfubase A in rabbits.     

Exposure dose assessment and discussion on radioisotope production and application

The exposure dose status on radioisotope production and application in China has been assessed in the paper. The average annual occupational exposure dose received by workers in the radioisotope production is about one tenth of the annual dose limit in normal situation. It is less than one twentieth for workers in the radioisotope applications. However, the annual collective dose for the latter is higher than the former by one oder of magnitude due to the larger number of workers in the application field. Although the output of radioisotopes increased doubly in 1980's as compared with 1970's, the increase on the annual collective dose was not obvious. For exposure to the public,¹³¹I for example, the collective dose in the radioisotope production decreased by one to two orders of magnitude and the releasing factor reduced by two orders of magnitude. Therefore, the exposure dose received by workers in radioisotope production and application is lower in normal situation. However, the facts worth paying attention to are that there were many events and accidents which happened in the radioisotope applications, especially at the irradiation facilities. The probability of fatal accident was as high as 10^–3 per irradiator year. In order to improve the radiation safety situation, it is imperative to conduct the safety assessment for irradiation facilities, to enhance management of the radioactive wastes and spent sources and to establish the experience feedback system.